Used coil lines / coil processing equipment for sale (71)

Condition: used, 72″ x .187″ x 50,000Lb Paxson Loop Slitting Line Make: Paxson Material Width: 12″ – 72″ (Uncoiler 60″) Material Width: .010″ – .187″ Coil Weight: 50,000Lb Coil ID: 20″ – 24″ Coil OD: 72″ Speed: 500 /1000 fpm Direction: Right to Left Material Strength: 40,000 yield / 50,000 psi shear Material: CR, HR, Galvanized Entry Transfer Cart Entry Coil Car Mandrel Uncoiler Powered Hold-Down Roll Powered Expansion Sliding Base Bjv Stk Ssihf Ufsnslc Hydraulic Peeling Table Driven Pinch Rolls

Condition: used, Coil Width: 12″ – 60″ Material Thickness: .015″-.135″ Coil ID: 20″-24″ Speed: 180 fpm Direction: Left to Right Entry Floor Standing Coil Car Mandrel Uncoiler with Powered Expansion Motorized Hold-Down Roll Feed-Up Drive Hydraulic Peeler 9-Roll Coil Straightener with 4″ Work Rolls Driven Entry Pinch Rolls 40HP Motor Bljv Stk Sjihf Tpenjc Adjustable Hump Table Mechanical Shear Belt Conveyor with Positive Stop Device Air Gate Sheet Stacker, with Two Section of Gravity Rolls

Condition: used, 72″ x .187″ x 20,000Lb Universal Slitting Line Blsv Stkeihf Tws Snjc Material Width: 12″ – 72″ Material Thickness: .015″ – .187″ Coil Weight: 20,000Lb Coil ID: 20″ Coil OD: 72″ Direction: Left to Right Entry Floor Standing Coil Car L-Type Design Hydraulic Lift & Traverse Mandrel Uncoiler Powered Hold-Down Roll Hydraulic Expansion Air Cooling Brake Sliding Base Hydraulic Peeling Table Slitting Head Arbor Diameter: 7″ Powered Arbor Adjustment 100HP DC Motor Knives & Tooling Recoiler Powered Push-Off Hydraulic Over-Arm Separator Hydraulic Expansion 100HP DC Motor Exit 2-Arm Turnstile Arm Width: 72″ Powered Rotation Complete Slitter with Electrics, Hydraulics, Controls, Tooling

Condition: used, Year of construction: 1985, material width 500 mm coil weight 1,0 t material thickness 0,4 - 5,0 mm coil internal diameter 420 - 520 mm coil external diameter 1200 mm material cross-cut 1500 mm² no. of straightening rolls 9 number of draw-in rolls 2 Bov Sjvut Hzotk Snelc speed 0 - 80 m/min Weight 1,70 t Dimensions (WxDxH) 2,7 x 1,3 x 1,9 m Weight 1,35 t dimensions 2,2 x 1,2 x 2,0 m Straightening machine with infinitely variable drive, intermediate lifting of the inlet rolls, hydraulic threading wedge Decoiler with auxiliary drive, hydraulic centralized expansion, snubber roll

Condition: used, Year of construction: 1996, material width 500 mm coil weight 2,5 t material thickness 0,2 - 3,0 mm coil internal diameter 480 - 530 mm coil external diameter 1300 mm material cross-cut 1000 mm² no. of straightening rolls 10 straightening roll diameter 80 mm number of draw-in rolls 2 roll diameter 120 mm speed 20 m/min power requirement 4,0 + 1,1 kW weight of straightening machine 2,3 t dimensions straightener (WxDxH) 1,4 x 2,2 x 2,0 mm weight of decoiler 0,95 t dimensions decoiler (WxDxH) 1,5 x 1,5 x 1,95 mm Straightening machine BRMS 4/500/10 with infinitely variable drive Decoiler BSH 3-500 with main motor for fix speed, ausiliary drive (declutchable), pneumatic snubber roll coil loop control via light guard Bevjvut Rao Stk Snelc can be offered without putting into operation or with putting into operation in given condition video at seller's site before dismantling available

Condition: used, Year of construction: 1995, material width 400 mm coil weight 2 x 2,0 t material thickness 0,4 - 3,0 mm coil internal diameter 460 - 530 mm coil external diameter 1500 mm material cross-cut 1200 mm² no. of straightening rolls 9 straightening roll diameter 30 mm speed 0 - 40 m/min Bljv Stkev Svaxo Snec power requirement 15,0 kW Weight 5,2 t Dimensions (WxDxH) 2,15 x 4,5 x 2,85 m - straightening machine type KRE 30.400/9 with infinitely variable drive, motoric adjustment of the roller cassette, rapid clamping device - double decoiler type 2000.2 H with pneumatic lag brake, hydraulic expansion, hydraulic snubber roll - coil loop control via ultrasound

Condition: used, Year of construction: 1995, material width 650 mm Bov Stjv Ehaqek Snolc coil weight 7,5 t material thickness 0,6 - 4,0 mm coil internal diameter 460 - 530 (630) mm coil external diameter 1300 mm material cross-cut 1300 mm² no. of straightening rolls 9 straightening roll diameter 60 mm speed 1 - 30 m/min power requirement 30,0 kW Straightening machine KOHLER 50.650/9 with infinitely variable drive, driven straightening rolls, hardchromium-plated rolls, motoric adjustment of the roller cassette Decoiler KOHLER 7500.1 with auxiliary drive, hydraulic centralized expansion, hydraulic snubber roll, attachment jaws for expansion of the inner diameter to approx. 580 - 630 mm, motoric lateral movement, hydraulic lifting table Servo roll feed WEINGARTEN WEP 65 coil loop control via light guard

Condition: used, Year of construction: 1994, material width 500 mm coil weight 3,0 t material thickness 0,2 - 2,5 mm coil internal diameter 470 - 530 mm coil external diameter 1400 mm no. of straightening rolls 9 straightening roll diameter 40 mm number of inlet and outlet rolls 4 material cross-cut 1200 mm² speed 1,5 - 30 m/min dimensions decoiler (WxDxH) 1,9 x 0,6 x 1,7 m weight decoiler 1,1 t dimensions straightener (WxDxH) 3,3 x 1,3 x 2,7 m weight straightener 3,0 t Bev Stjvut Eqjk Snelc - Straightening machine RYD 40 x 500 with infinitely variable drive (driven lower straightening rolls), straightening rolls individually adjustable by motor, supporting rolls, outlet roller basket - Decoiler DY 500 x 3000 with hydraulic auxiliary drive, pneumatic lag brake, hydraulic expansion, hydraulic snubber roll, hydraulic insertion aid, hydraulic coil lifting device - coil loop control can be offered without or with putting into operation in given condition

Condition: used, SANDWICH PANEL LINE FOR DOORS AND WALLS : 610mm width Made by METECO This sandwich panel production line is designed to manufacture doors & walls panels up to 610mm with an annual capacity of 1.500.000 m panel/year. MAIN PRODUCTION DATA Width: 500 - 610 mm Thickness: 40 - 80 mm Capacity: 1.500.000 m panel/year TECHNICAL SPECIFICATIONS Line speed: 12 m/min Blevovtpcij Stk Snec Maximum weight of reels that can be used: 10 Ton Coil outer diameter: Maximum 1400 mm Coil inner diameter: 508 mm Maximum sheet width: 610 mm Maximum thickness of producible panels: 80 mm Power supply: 400 V Frequency: 50 Hz SCOPE OF SUPPLY 1. Upper sheet metal treatment section - 10 T upper unwinder with coil carriage - Pinch-Roll and roller passage - Upper reel steel frame - Polyethylene film applicator - Embossing machine for texture pattern - Press for decoration pattern - Profiling machine with upper rollers (12 stands) - Steel upper frame for profiling machine - Upper sheet guide 2. Lower sheet treatment section - Lower 10 T double unwinder with reel carriage - Polyethylene film applicator - Corona treatment machine - Embossing machine - Lower roller forming machine (12 stands) - Rollway - Operator desk for entry line 3. Panel forming section - Hot air preheating oven - Sheet guiding unit - Steel reinforcement machine - High-pressure foaming plant - Foaming portal - Foaming booth - Side sealing system and tape applicator - Double press conveyor - Double belt heating system - Double belt press - Outfeed roller conveyor - Sawing machine for cutting - Soundproof cabin - Dust extraction unit - Operator Control desk 4. Stackable section - Automatic panel tilter - Stackable conveyor - Extraction conveyor - Packaging section - Styrofoam spacer feeding system - Infeed conveyor - Packaging machine - Extraction conveyor - Wrapping machine 5. Panel production equipment - Top roller forming tools - Bottom roll forming tools 6. List of additional machines - Container station for polyol, isocyanate and additives - Pentane tank and accessories Width: 500 - 610 mm Thickness: 40 - 80 mm Line speed: 12 m/min Maximum weight of reels that can be used: 10 Ton Coil outer diameter: Maximum 1400 mm Coil inner diameter: 508 mm Maximum sheet width: 610 mm Maximum thickness of producible panels: 80 mm Power supply: 400 V Frequency: 50 Hz Capacity: 1.500.000 m panel/year

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, Roller Feeder Manufacturer: DREHER Model: WAV - RDS - 2 E 1125 Year of manufacture: 1993 Blev Stk Seyfwclonoc Condition: Very good / Ready for use Belt width: 650 mm Material thickness: 0.8 - 5 mm Feed roller diameter: 125 mm Feed speed: 8 m/min.

Condition: used, Machine type: Corrugated sheet profiling line – new CHIEF PHENIX type Main components: - Coil lifting arm – 10-ton capacity - Decoiler – 10-ton capacity - Straightener – Dimeco - Feeder – Dimeco Microfeeder Bljv Stk Sow Dd Hponsc - Hydraulic punching press – SCMB 650 tons - Post-press feeder – Heilbronn - Roller conveyors - Rollforming line – 1000 mm, corrugated profile, CHIEF PHENIX new type Machine Application Automated production line for converting metal coils into corrugated sheets, including straightening, high-force hydraulic punching, continuous feeding, and rollforming. Suitable for structural and cladding applications. Key Features / Differences Modern system with high-performance units: 650-ton SCMB hydraulic press for precise punching, Dimeco straightener and Microfeeder for high throughput. 1000 mm rollforming line configured for optimized CHIEF PHENIX corrugated profile.

Condition: excellent (used), Year of construction: 1995, Decoiler Max. width 350 mm Clamping area coil internal 470 - 530 mm Coil diameter 1500 mm Work load 2000 Kg Straigtner Width 350 mm Roll diameter 30 mm Number off rolls 9 units In feed rolls 2 units In feed roll diameter 90 mm Working speed 40 M/Min Max. thickness 6 mm at 240 N/mm2 Max. Thickness 5 mm at 400 N/mm2 Length:3200mm Bovjx Sx Spo Stk Snslc Width:1500mm Height:2200mm Weight:3700kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 1992, Decoiler Bjv Sjuqm Dnstk Snjlc Max. width 350 mm Clamping area coil internal mm Coil diameter 1500 mm Work load 1000 Kg Straigtner Width 250 mm Roll diameter 30 mm Number off rolls 21 units Working speed 40 M/Min Max. thickness 6 mm at 240 N/mm2 Max. Thickness 5 mm at 400 N/mm2 Length: 3200 mm Width: 2000 mm Height: 2100 mm

Condition: used, material width 320 mm coil weight 2,6 t material thickness 0,5 - 2,0 mm Bovovuk She Stk Snolc coil internal diameter 400 - 510 mm coil external diameter 1200 mm no. of straightening rolls 7 straightening roll diameter 50 mm number of draw-in rolls 2 band speed 0 - 30 m/min power capacity 1,5 kW weight 1,5 t Dimensions (WxDxH) 2,0 x 1,4 x 1,9 m Straightening machine with infinitely variable drive, straightening rolls individually manually adjustable, pneumatic alligator opening of the roller cassette Decoiler with pneumatic lag break, manual centralized expansion as is where is, WITHOUT putting into operation in our warehouse Price for commissioning (in given condition) on request

Condition: used, Year of construction: 1976, material width 400 mm coil weight 3,0 t coil internal diameter 460 - 560 mm Blsv Sjvzxq Estk Snjc coil external diameter 1500 mm material thickness 0,6 - 3,0 mm no. of straightening rolls 7 straightening roll diameter 60 mm number of draw-in rolls 2 x 120 mm power capacity 5,0 + 1,5 kW dimensions decoiler (WxDxH) 2,5 x 1,4 x 2,4 m weight decoiler 1,8 t dimensions straightener (WxDxH) 1,2 x 1,5 x 2,4 m weight straightener 1,3 t Straightening machine (type RS 67-04 / 0) with geared motor, driven lower straightening rolls, straightening rolls hardened and polished, straightening rolls individually manually adjustable, pneumatic intermediate lifting of the in-feed rolls, roller basket, coil loop control Decoiler (type BA 1-04/030) not driven, with lag break, manual centralized expansion, hydraulic snubber roll, lateral movement, hydraulic lifting table as is where is, WITHOUT putting into operation

Condition: used, Year of construction: 1998, material width 100 - 450 mm material thickness 1,0 - 14,0 mm coil weight 10,0 t coil internal diameter 470 - 520 mm coil external diameter 1100 - 2000 mm no. of straightening rolls 12 straightening roll diameter 2x70 / 2x96 / 8x127 mm number of draw-in rolls 2 inlet roll diameter 160 mm min. material width 100 mm speed 15 m/min power requirement 75,0 kW weight of decoiler 6,4 t weight of straightening machine 12,8 t dimensions decoiler (WxDxH) 3,1 x 1,4 x 3,7 mm dimensions straightener (WxDxH) 2,5 x 3,4 x 2,7 mm Straightening machine RMS Vario-12-70/96/127-450 with infinitely variable drive, driven straightening rolls, supporting rolls, upper straightening cassette hydraulic liftable, hydraulic threading wedge Decoiler HES 12-650 with infinitely varieble insertion drive, pneumatic lag brake, hydraulic snubber roll (motoric driven), hydraulic centralized expansion Blev Stkjvuugis Snec hydraulic coil lifting device hydraulic loop bridge coil loop control via ultrasonic cropping shears HSO 150-0450 working direction from left to right as is where is, WITHOUT putting into operation - Video at seller's site before dismantling available

Condition: used, Year of construction: 1990, material width coil line 650 mm coil weight 2 x 3,5 t coil internal diameter 460 - 530 mm coil external diameter 1500 mm material thickness coil line 0,8 - 3,0 mm no. of straightening rolls 7 no. of rolls at in- and outlet 4 roll diameter 80 mm feed length 0 - 500 mm Bsv Stkevuudue Snelc power requirement 10,0 kW weight 10,0 t dimensions of the coil line 8,8 x 4,0 x 2,55 m Straightening machine Dimeco, 1676 EV with inlet table and pre-shaping roll, hydraulic loading bridge Double decoiler Dimeco 2382 FFPS with pneumatic lag brake, hydraulic expansion, hydraulic snubber roll, coil loading device elektronic roll feed Microfeed 1140 E with DC-drive, pneumatic intermediate lifting of the rolls can only be offered without putting into operation - video at seller's site before dismantling available

Condition: used, Year of construction: 1984, material width 300 mm coil weight 0,5 t material thickness 0,4 - 3,0 mm coil internal diameter 420 - 520 mm coil external diameter 1200 mm no. of straightening rolls 9 straightening roll diameter 50 mm number of draw-in rolls 2 diameter of draw-in rolls 50 mm power requirement 1,5 kW weight 1,55 t dimensions (WxDxH) 2,5 x 1,2 x 1,8 m Blev Stevuk Icok Snec Straightening machine with infinitely variable drive, supporting rolls, 2-point-adjustment of the straightening rolls Decoiler not driven, with pneumatic lag break, manual centralized expansion

Condition: used, Year of construction: 1971, material width 180 mm coil weight 0,5 t material thickness 2,0 - 6,0 mm coil external diameter 400 - 1250 mm Blevevuk H Se Stk Snec no. of straightening rolls 5 straightening roll diameter 70 mm number of draw-in rolls 2 0 roll diameter 110 mm speed 20 m/min power requirement 4,0 kW Weight 2,8 t dimensions (WxDxH) 1,4 x 2,45 x 1,85 m with infinitely variable drive, pneumatic snubber roll, pneumatic intermittent lifting, coil loop control material thickness 2,0 mm at material width 180 mm Material thickness 6,0 mm at material width 40 mm as is where is, WITHOUT additional work The putting into operation in our warehouse can be offered additionally on request

Condition: used, Year of construction: 1994, material width 650 mm coil weight 3,5 t material thickness 0,8 - 3,0 mm no. of straightening rolls 7 straightening roll diameter 80 mm number of inlet rolls 4 coil internal diameter 460 - 530 mm coil external diameter 1400 mm weight straightener 1,0 t weight decoiler 0,9 t dimensions straightener (WxDxH) 1,5 x 1,9 x 2,0 m dimensions decoiler (WxDxH) 2,2 x 1,8 x 1,9 m Feeder-straightening machine DREHER 1676 E/RDS Modell 1529/4 with infinitely variable drive Decoiler DREHER 2380 FM-FPS Modell 891/5 motoric driven. with pneumatic lag brake, manual centralized expansion, pneumatic snubber roll Bev Stsvut Sdsk Snjlc coil loop control Ultrasonic

Condition: used, Year of construction: 1971, material width 300 mm coil weight 2,0 t material thickness 1,0 - 5,0 mm coil internal diameter 440 - 520 mm coil external diameter 1320 mm no. of straightening rolls 6 straightening roll diameter 70 mm number of draw-in rolls 2 diameter of draw-in rolls 70 mm power requirement 1,1 kW weight of decoiler 2,0 t dimensions decoiler (WxDxH) 2,0 x 2,0 x 1,7 mm weight of straightening machine 1,3 t dimensions straightener (WxDxH) 2,7 x 1,3 x 2,4 mm Straightening machine RM-S 300 with infinitely variable drive, pneumatic intermittent lifting, hydraulic inlet table, bending roll, alligator opening, coil loop control Decoiler H 2 with auxiliary drive, pneumatic snubber roll, hydraulic expansion, manually shiftable as is where is, WITHOUT putting into operation Blov Stk Sjvut Dtjnoc Price for commissioning (in given condition) on request

Condition: used, Year of construction: 1978, material width 500 mm coil weight 6,5 t material thickness 0,5 - 1,5 mm coil internal diameter 420 - 560 mm coil external diameter 1500 mm no. of straightening rolls 17 Blov Sjvuunastk Snoc straightening roll diameter 50 mm number of draw-in rolls 4 speed 6 - 60 m/min dimensions of the straightener (WxDxH) 2,3 x 1,3 x 1,7 m dimensions of the decoiler (WxDxH) 1,3 x 1,2 x 2,0 m straightener (type R 500) with infinitely variable drive, adjustment of the roller box manual centralized double decoiler (type LH 2-1,5-500) with hydraulic centralized expansion, hydro-mechanical lag break as is where is, WITHOUT putting into operation, WITHOUT hydraulic aggregate

Condition: excellent (used), Year of construction: 1973, functionality: fully functional, loading capacity: max. 700 Kg. disc diameter: 1.000 mm coil outside diam. max. 900 mm coil inside diam. 240 - 560 mm coil width: max. 120 mm Bev Stkjxtp Eyo Snjlc

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, RAZIOL belt lubrication system consisting of: RAZIOL pressure vessel Control unit Compressed air unit Bjv Stkowcpp He Snolc

Condition: excellent (used), Year of construction: 1991, laoding capacity: max. 700 Kg. decoiler diameter: 1.000 mm coil outside diameter: max. 1.400 kg. coil inside diameter: 260 - 710 mm strip metal width: max. 120 mm Blev Ssuugi Estk Snjc