Used plasma cutting machines for sale (150)

Condition: ready for operation (used), 80 kVA (220V,24V,380V,415V,440V,500V) some more frequenties 50/60Hz plasma bron / plasma source / plasma / cutting / SAF / Nertajet HP 120 Plasmasource: SAF Nertajet HP 120 Bev Steygywnsk Snslc

Condition: ready for operation (used), Year of construction: 2020, This GEPELEKTRO Phantom CNC was manufactured in 2020. It features a large working area with table dimensions of 12,000 × 3,000 mm and is equipped with a Lincoln Electric Burny Phantom II controller. It can handle flame cutting up to 300 mm steel and plasma cutting up to 50 mm steel. The machine includes a complete extraction system and Messer OmniWin 2019 software. Contact us for more information about this machine. • Condition: Excellent, low operating hours • Status: Connected to power; testable on-site • Working area: Table 12,000 × 3,000 mm • Control system: Lincoln Electric Burny Phantom II • Plasma source: Kjellberg Finsterwalde HiFocus 161i • Maximum cutting thickness: • Oxy-fuel (steel S235): up to 300 mm • Plasma (steel S235): up to 50 mm • Plasma (stainless WNR 1.4301 / AISI 304 / KO-33): up to 40 mm Additional equipment Bevsx E Edfe Stk Snelc • Complete extraction system • Messer OmniWin 2019 software with hardware key

Condition: good (used), Year of construction: 2011, functionality: fully functional, Technical details gangway length 14000 mm working width 3700 mm burner heads 6 Control CNC 802 Additional information Used oxyfuel cutting machine with semi-automatic gas control and 6 oxyfuel torches Working width 3700 mm Blov Ssyf Eddstk Snsc Track width 4500 mm Overall width 5320 mm Overall height 2100 mm Height above floor to bottom edge of torch support on track beam mounted 1300 mm, floor-mounted without beam 1000 mm Track length 16000 mm on HE 300 B beam Oxyfuel burner: 6 pieces with MS 832-250 blades Burner carriages: 6 pieces, maintenance arm mounted on round bar Burner height adjustment: 6 pieces E 260 with 260 mm stroke Maximum cutting thickness with 4 torches: 300 mm Maximum cutting thickness with 6 torches: 200 mm Feed speed: 12000 mm/min CNC 802 control with vibration-resistant flash memory Semi-automatic gas control via proportional valves 96 macros (modifiable standard shapes) Easy to learn USB interface CNC Cut software for importing and converting DXF files 15" screen behind shatterproof, scratch-resistant glass, operable even with gloves. Note: A burner table and an extractor are not included in the scope of delivery.

Condition: ready for operation (used), Year of construction: 2015, This VOORTMAN V304 was manufactured in 2015. A robust plasma cutting machine, it's ideal for precision cutting tasks. Consider the opportunity to buy this VOORTMAN V304 plasma cutting machine. Contact us for further details. Machine Benefits Qualitative Machine Benefits • The plasma 3d bevel unit has a maximum acceleration of 2000 mm/s² on the z-axis, a maximum speed of 365 mm/s on the z-axis, a bevel angle of ±50° depending on the torch type, a positioning accuracy of ±0. 5°, and supports material thicknesses of 6–50 mm. Bev Sjx D I S Hetk Snslc • The oxy-fuel cutting unit is a nozzle mix type with a magnetic valve and backfire protection for gas supply, automatic external ignition, a maximum thickness of 200 mm for 1 or 2 pieces, 125 mm for 3 pieces, 100 mm for 4 pieces, 75 mm for 5 pieces, and 60 mm for 6 pieces, using acetylene gas as standard, propane as an optional gas, and o₂ as the cutting gas. • The voortman height control has a maximum acceleration of 2000 mm/s² on the z-axis and a maximum speed of 365 mm/s on the z-axis. • Voltage stabilizer: not included • Ambient temperature: 0–35°c, max. 95% relative humidity • Working height: 705 mm (±20 mm) • Working height: 705 mm (±20 mm) Technical Machine Benefits • Power per servo drive: 26 kw • Acceleration: 1000 mm/s² • Maximum pierce capacity: 40 mm • Dross-free cutting (maximum): 35 mm • Marking lines: yes, with the same consumables • Plasma gas (mild steel): cutting: o₂ (999% pure, clean, dry, oil-free); marking: argon gas or o₂/air (999% pure, clean, dry, oil-free) • Shield gas (mild steel): yes • Automatic gas console: yes • Cutting speed for mild steel is approximately 3700 mm/min at 90a for 6 mm, 3600 mm/min at 200a for 12 mm, 1600 mm/min at 300a for 25 mm, 720 mm/min at 300a for 40 mm, 400 mm/min at 300a for 50 mm, and 100 mm/min at 300a for 80 mm • Grounding: maximum 6 m of the machine. Ac power, pe, and service grounds must comply with local and national codes. Extra Information Machine still under power

Condition: used, Year of construction: 1996, Plasmacutter, Plasma Cutting Machine Manufacturer: SAF Type: Plasmatome 3 Control: Digisaf 2.5 Manufacturer plasma-source: SAF Type plasma-source: Nertajet HP120 Cutting-dimensions: 6000x2000mm Cutting-thickness: 35mm Incl. filter/extraction! Incl. documentation and peripherals Machine dismantled for transport - Year: 1996 - Documentation available: No - CE certificate present: No - X-axis travel [mm]: 6000 - Y-axis travel [mm]: 2000 - Max. material thickness [mm]: 35 - Options: Extraction Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Bov Stk Sow Dpi Nonjlc Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2023, CNC plasma cutting machine Manufacturer: Microstep Model: MasterCut Compact 3001.15P Bsv Stoydibqsk Snolc Year of manufacture: 2023 CNC control system Working area: 1,500 x 3,000 mm 1 x plasma torch with Hypertherm Powermax 45 power source Air plasma system Piercing thickness: 12 mm For thin sheet metal Without filter Available: March 2026 3226ä

Condition: ready for operation (used), Year of construction: 2021, number of axes: 3, This 3-axis MicroStep 3001.15P/ME plasma cutting machine was manufactured in 2021. It features a working area of 1500x3000mm, ideal for precise and large-scale cutting tasks. If you are looking to get high-quality cutting capabilities, consider the MicroStep 3001.15P/ME machine we have for sale. Contact us for more information. Bjveycvq Ae Stk Snslc • Working dimensions: 1500 x 3000 mm

Condition: ready for operation (used), Year of construction: 2014, This SAF PRO ALPHATOME 20 40 plasma cutting machine was manufactured in 2014. It features a robust 4000 x 2000 mm table and includes a NERTAJET HP150 plasma source along with PRONEST HYPETHERM NESTING SOFTWARE. Designed for cutting up to 20 mm steel, it ensures precision with CNC control and linear guides on all axes. Consider the opportunity to buy this SAF PRO ALPHATOME 20 40 plasma cutting machine. Contact us for more information. • Table size: 4000 x 2000 mm • Cutting capacity: up to 20 mm steel • CNC control with mouse • CNC control with included cutting software • Linear guides on all axes for high repeatability Blsv Stkjx D D Nhs Snsc • Robust base for increased support and rigidity • Country of manufacture: France • CE compliant Additional equipment • NERTAJET HP150 plasma source • PRONEST Hypertherm nesting software

Condition: used, Year of construction: 2023, CNC Gantry Plasma Cutting Machine with Rotator Manufacturer: Microstep Model: MasterCut 6001.30PtkG Year of manufacture: 2023 CNC control system Working area: 3,000 x 6,000 mm 1 plasma torch with power source Kjellberg Q3000 1 oxy-fuel torch GCE FIT+ three (cutting gas: acetylene) Burning table with sectional extraction 6,000 x 3,000 mm Plasma rotator “MasterCut” with fully automatic support Bev Stsxu U Ddok Snelc ACTG automatic calibration unit for the bevel cutting head Kemper extraction system 8000 (year 10/2015) Asper Basic 2D programming software + Asper BevelCut – programming for bevel cutting Other technical specifications: MicroStep machine control with MMI console and 24” touchscreen iMSNC Expert System Module iMSNC Module for automatic calibration of mechanical sensing iMSNC Module assistant for loading CNC programs LCD operating unit on gantry Laser pointer with automatic offset transfer USB 3.0 ports for external storage Remote service module MicroStep RemoteDiagnostics Slat cover on the cutting table Reinforced design of the burning table Integration of the fine plasma source with the CNC control Control of the automatic gas console Electrical and mechanical torch height sensing LED signal beacon on the gantry bridge (2 colors) Tactile shutdown device for guide rails Light barrier protection (collision protection) for the gantry bridge via emergency stop Smart Z Movement ACTG Calibration Report Fully automatic oxy-fuel torch support Automatic gas console for oxy-fuel torch (cutting gas: acetylene) Active collision protection

Condition: used, Year of construction: 2017, CNC gantry plasma cutting machine (bevel unit) with oxy-fuel torch Manufacturer: Zinser Model: 2425-I/3600 Year of manufacture: 2017 CNC control: 5010 Track length: 11 m Cutting table with oscillating conveyor system, including extraction system Dimensions: 2,000 x 8,000 mm 1 plasma torch with Hypertherm XPR300 power source automatic gas console incl. automatically rotating plasma bevel unit Bevel System 2015/350 1 oxy-fuel torch Filter system Downflow 3DFP9-SP Power: 9 kW Blev Stsw Rpvbsk Snoc Laser diode 3226ä

Condition: good (used), Year of construction: 2018, Burning and Drilling Line Plate Processing Center Manufacturer: Vernet-Behringer Model: MAG EVO 420 Year of manufacture: 2018 CNC control Power source: Kjellberg HiFocus 360 Plasma cutting for material thickness: 5 to 50 mm Spindle speed: 160 – 4,000 rpm automatic tool turret Tool stations: 14 Drive power: 16 kW Drilling diameter: 5 - 40 mm V-scoring scribing: 5 to 40 mm Minimum plate dimensions: 1,500 x 300 mm (750 x 400 mm with restrictions) Bsv Stkevzrcze Snslc Minimum finished part size: 80 x 80 mm Maximum plate weight: 2,600 kg and 650 kg/m Infeed side: Roller conveyor for flat steel or plates: 4,000 x 2,000 mm Zero-point cross transfer conveyor Number of carriages: 2 clamps NC feed carriage, laterally positioned 4 clamping grippers (2+2) 3 short-stroke cross transfer conveyors Working height: 1,000 mm Outfeed side: Discharge roller conveyor with lowering unloading table, including chute to scrap container for unloading of small parts. Filter unit including piping High-performance for use with carbide tools. For drilling, thread cutting, marking, milling and plasma cutting of flat steel and plates. Software options for milling and scribing LANTEK license ä3226 Availability: Immediately!

Condition: good (used), Year of construction: 2012, CNC portal plasma cutting machine Manufacturer: Microstep Bljv Steu U Hm Aek Snsc Model: SPL PAA 9001.25 Year of manufacture: 2012 CNC control Working area: 2,500 x 9,000 mm 1 plasma torch with Kjellberg HiFocus 280i power source 2 oxy-fuel torches for propane Oscillating conveyor table Beuting Donaldson DFPRO12 filtration unit for outdoor installation

Condition: good (used), Year of construction: 2008, CNC Portal Plasma Cutting Machine Manufacturer: Messer Model: Multitherm 4000 CNC Control: Global Control Plus Bov Stk Seiff Dajnolc Year of Manufacture: 2008 Retrofit: 2019 Extraction Table: 2,000 x 3,000 mm 1 Oxy-fuel Torch ALFA 1 Plasma Torch Power Source: Kjellberg HiFocus 280i Filter Unit: Z-Line 9 ZDC Own technicians available for installation, commissioning, and training! All spare parts in stock.

Condition: good (used), Year of construction: 2000, CNC Gantry Plasma Cutting Machine Manufacturer: Messer Model: Omnimat L5000 Year of manufacture: 2000 CNC control: Fanuc Working area: 3000 x 6000 mm Extension possible 1 plasma torch with Hypertherm HT2000 power source Blovohwtn Is Stk Snjc 3 oxy-fuel torches without table without filter 3226ä

Condition: used, Year of construction: 2022, Plasma Cutting System Manufacturer: Swift Cut Model: Pro 3000 Year of manufacture: 2022 X/Y travel: 3,000 x 1,500 mm Power source: Hypertherm Powermax65 SYNC Blev Ssyazzbetk Snec Max. sheet thickness (mild steel): 16 mm Max. sheet thickness (stainless steel): 12 mm Max. sheet thickness (aluminum): 12 mm Table length: 3,000 mm Working width: 1,500 mm Table width: 1,500 mm

Condition: used, Year of construction: 2019, CNC portal plasma cutting machine Manufacturer: Microstep Model: MG 4501.20 BkP Year of manufacture: 2019 CNC control Working area: 2,000 x 4,500 mm Blsvjyay H Aj Stk Snec 1 x 2D plasma torch with Hypertherm XPR300 power source, including Optimix gas console 1 x drilling spindle 26 kW up to 40 mm diameter, including 8-position automatic tool changer 1 x preparation for retrofit of a rotator (for bevel cutting) 1 x nesting software integrated in the CNC control 3226 Availability: May 2026

Condition: used, Year of construction: 2020, CNC portal plasma cutting machine with Skew Rotator beveling unit Manufacturer: Messer Model: Multitherm 4000 Year of manufacture: 2020 CNC Control: Global Control Plus Working area: 3 x 12 m Track gauge: 4,000 mm 1 oxy-fuel torch ALFA 1 plasma torch with Skew Rotator beveling unit Power source: Hypertherm XPR300 Cutting capacity: 50 mm piercing 80 mm separation cut Extraction table: Beuting Without filter system Software: Omniwin with Bevel ä3226 Blev Stkex Dlwmo Snec

Condition: good (used), Year of construction: 2006, CNC Gantry Flame Cutting Machine Manufacturer: Messer Model: Easytherm 4600 Year of manufacture: 2006 Control: Global Control Blsv Stk Soivz A Rsnsc Working area: 3 x 9 m No table!! Table can be offered upon request! Track length: 12 m with HEB beam 1 oxy-fuel torch ALFA 1 plasma torch with Kjellberg 160i plus power source Including marking system Torit filtration system Own technicians available for assembly, commissioning and training! All spare parts in stock. 3226ä

Condition: good (used), Year of construction: 2007, CNC portal plasma cutting machine Manufacturer: Microstep Bovsuv Hkge Stk Snslc Model: SPL-P 12001.20 Year of manufacture: 2007 CNC control 1 plasma torch with power source Kjellberg HiFocus 160i Extraction table: 2 x 12 m Filter system Donaldson Torit DCE

Condition: ready for operation (used), Year of construction: 2015, travel distance X-axis: 2,000 mm, travel distance Y-axis: 8,000 mm, This 5-axis AJAN PP 260 A-5T plasma cutting machine was manufactured in 2015. It features a robust AJAN PP260A power source with a cutting capacity of up to 65 mm for mild steel and 50 mm for stainless steel and aluminum. The large working area spans 2000 mm by 8000 mm, and it includes an AJANCNC 952 Controller for precise control. Consider the opportunity to buy this AJAN PP 260 A-5T plasma cutting machine. Contact us for more information. Additional equipment • Cutting Gases: O₂, N₂, F5, H35 / Table Ventilation: Mechanical valve with JET filtration system/ Optional Features: Oxy-fuel torch, pipe cutting unit, industrial fume extraction system Machine Benefits Technical Machine Benefits • Cutting capacity: mild steel: up to 65 mm/ stainless steel: up to 50 mm/ aluminum: up to 50 mm • Piercing capacity: mild steel: 40 mm /stainless steel: 25 mm /aluminum: 25 mm • Max. Positioning speed: 15 m/min • Positioning accuracy: ±0. 01 mm • Number of axes: 5 (with bevel cutting capability) • Control system: linux-based / software: ajancad and ajancam v7. 0 Bjv Stjyaiyxsk Snelc

Condition: like new (used), Year of construction: 2018, operating hours: 700 h, functionality: fully functional, type of input current: AC, sheet thickness (max.): 60 mm, sheet thickness steel (max.): 60 mm, overall weight: 5,000 kg, workpiece weight (max.): 4,000 kg, cutting current: 200 A, KOIKE Gammatec 2040 – CNC Plasma Cutting Machine for Sale 📌 Manufacturer / Model: KOIKE Gammatec 2040 📆 Year of manufacture: 2019 📍 Location: Finland 💪 Powerful and precise CNC plasma cutting solution The KOIKE Gammatec 2040 is a heavy-duty industrial CNC plasma cutting machine, designed for high accuracy and reliable production. It is an excellent choice for metal workshops, fabrication companies, and industrial manufacturing environments. 📊 Technical specifications Bov Ssygk Sietk Snjlc 📏 Cutting area (X × Y): 4,000 × 2,000 mm 🔪 Maximum cutting thickness: up to 60 mm 🌀 Number of torches: 1 🧠 Control system: CNC ⚡ Plasma system: Kjellberg HiFocus 🔌 Power requirement: approx. 2 kVA 📦 Machine dimensions: approx. 5,000 × 2,400 × 1,000 mm ⚖️ Machine weight: approx. 4,000 kg 📈 Key advantages ✅ Large cutting table (4 m × 2 m) – ideal for large metal sheets ✅ CNC-controlled precision for industrial production ✅ Proven KOIKE quality and robust machine design ✅ Suitable for continuous workshop or factory use 🛠 Condition 🔹 Used – very good condition The machine can be inspected and tested prior to purchase. Power source: Smart Focus 200 Mains voltage: 3 × 400 V, 60 Hz Cutting current: 35 – 200 A Marking current: 10 – 50 A Cutting range: Maximum: 60 mm Recommended: 1 – 10 mm Piercing: Maximum: 32 mm Plasma gases: O₂, Ar / H₂, N₂, Air Piercing gases: Ar, N₂ Dimensions (L × W × H): 1030 × 680 × 1450 mm Mass: 388 kg Plasma machine torch: PerCut 4000 Quick change head: PerCut 4000

Condition: like new (used), Year of construction: 2025, operating hours: 26 h, functionality: fully functional, type of input current: three-phase, working range: 4,000 mm, sheet thickness steel (max.): 50 mm, overall weight: 3,000 kg, total width: 2,700 mm, total length: 5,000 mm, workpiece weight (max.): 5,000 kg, Equipment: documentation/manual, Demonstration machine with large spare wear parts package for sale. Cutting table 4x2m and 300A XPR High Definition water-cooled Hypertherm power source. Core Plus mixed-gas console. True Hole function bolt guarantee —> Hole diameter equals material thickness (e.g. 20mm hole in 20mm plate). Top cutting results thanks to HD cutting technology. Very reliable and extremely user-friendly machine. Remote access and operation via office PC or smartphone possible, CAM software on board. - only 26 cutting hours - Includes approx. €3,000 (net) worth of wear parts - Includes 3 quick-change heads, HD water-cooled, price per piece approx. €1,500 (net) - Piercing up to 50mm with Argon Assist - Cuts up to 80mm in mild steel - Includes comprehensive training at our premises - Dismantling and loading included - 4-year manufacturer’s warranty - New price: €135,000 (net) Blov Stksygczpe Snsc Freight and installation available as separate offer.

Condition: ready for operation (used), Year of construction: 2008, This GASPARINI Spark 20040 was manufactured in 2008. A robust plasma cutting machine, it features a substantial working area of 4000×2000 mm and can handle sheet metal up to 60 mm thick. With cutting speeds ranging from 0.1 to 30 m/min and a maximum positioning speed of 40 m/min, it's designed for efficiency. Consider the opportunity to buy this GASPARINI Spark 20040 plasma cutting machine. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Supply voltage: 220 v, 400 v, 440 v / frequency: 50-60 hz • Length x width (fully assembled): 4910 x 3150 mm/ machine height: 1581 mm / cutting surface height: 908 mm • Machine weight (without grid): 3300 kg / total machine weight: 3500 kg • Maximum sheet metal thickness: 60 mm / cutting speed: min: 0. 1 m/min, max: 30 m/min / max. Positioning speed (x-axis): 40 m/min / max. Acceleration (x-axis): 2 m/s² • Maximum power consumption: 8 kw (control panel), 19. 5 kw (plasma generator), 8 kw (fume extraction system) • Coolant temperature: 10−40°c / minimum coolant flow: 6 l/min / coolant pressure: 3. 5−4. 5 bar • Output current: 20−130 a / maximum output power: 19. 5 kw • Room requirement: 1400×600×300 mm • Cross-section of supply lines: 4mm² / supply cable cross-section: 10 mm² / fuse: 32 a slow-blow Blsvex U Ucis Stk Snsc Extra Information without suction

Condition: ready for operation (used), Year of construction: 2019, operating hours: 5,800 h, table load: 7,500 kg, This VOORTMAN V320 was manufactured in 2019. It features a Kjellberg Smart Focus 300 plasma source and a Donaldson DFPR06 extraction system. Capable of handling mild steel with a panel length range of 850 – 6,100 mm and thickness from 6 – 75 mm. It includes options for punch marking and countersinking, enhancing versatility. Consider the opportunity to buy this VOORTMAN V320 plasma cutting machine. Contact us for more information about this machine. • Workpiece size • Min./max. panel length: 850 – 6,100 mm • Min./max. panel width: 200 – 2,050 mm • Min./max. panel thickness: 6 – 75 mm • Drilling unit: VD40 • Mounting: SK 40 • Axis speed: 0 – 2,500 rpm (continuously variable, servo motor) • Drill diameter: 5 – 40 mm • Threading: M6 – M30 • Countersinking: Yes • Punch marking option: Yes • Layout marking option (optional): Yes • Automatic tool changer: 2 x VTC 5/40 (2 x 5 positions) • Lubrication/cooling: Internal cooling, air/oil • Hydraulic mounting: Yes • Rated load: 30 kW • Feeding and positioning: Synchronously driven servo motors, servo converter • Cutting – Plasma (Smart Focus 300) • Min./max. thickness: 3 – 80 mm • Max. piercing capacity: 40 mm • Virtually slag-free cutting: up to 35 mm • Marking: Yes, with the same consumables • Gases: • Plasma gas for cutting mild steel: O2 (99.9% pure, clean, dry, oil-free) • Shielding gas for mild steel: O2 / Air (99.9% pure, clean, dry, oil-free) • Marking gas: Argon; for >200 A, nitrogen • Automatic gas console: Yes • Automatic height adjustment: Yes • Ignition: Automatic • Cutting speed (mild steel): • 6 mm: approx. 3,700 mm/min @ 90 A • 12 mm: approx. 3,600 mm/min @ 200 A • 25 mm: approx. 1,600 mm/min @ 300 A • 40 mm: approx. 720 mm/min @ 300 A • 50 mm: approx. 400 mm/min @ 300 A • 80 mm: approx. 100 mm/min @ 300 A • Cutting – Oxy-fuel (oxygen cutting unit) • Nozzle type: Nozzle-mix • Automatic height adjustment: Yes • Gas supply: Magnetic valve with non-return valve • Fuel gas: Propane (optional: Acetylene) Blov Stk Ssx D N Aajnsc • Cutting gas: O2 • Max. thickness: 75 mm • General/installation • Working direction: Left to right • Working height: 760 mm (+/- 25 mm) • Ambient temperature: -10°C to +35°C, max. 95% relative humidity • Voltage regulator: Not included • Current transformer: Not included Additional equipment • Kjellberg Smart Focus 300 plasma source (included) • Donaldson DFPR06 extraction system (included; last filter change January 2025)

Condition: good (used), Year of construction: 2010, functionality: fully functional, working range: 3,500 mm, sheet thickness (max.): 250 mm, sheet thickness steel (max.): 250 mm, input voltage: 230 V, cutting speed: 12,000 mm/min, Equipment: documentation/manual, Koike Maxigraph 3500 cutting machine with Burny Phantom control. This machine is suitable for oxy-fuel and plasma cutting. The machine is used but in good condition. Machine can be seen in operation. Year of manufacture: 2010 Please note, this offer includes only: - Gantry - Control unit - X, Y, and P motors - Lifter and Koike THC height control - Cables and hoses Excluding: - Cutting table - Extractor/filter - Hypertherm 260 plasma source - Warranty Bov Stjyc Ecnok Snslc For questions, please email us. If you have any questions or require more information, feel free to send us a message or call us.