Condition: excellent (used), Year of construction: 2020, clamping force: 2,000 kN, Equipment: documentation/manual, Clamping force: 200 t Screw diameter: 50 mm Distance between tie bars V: 570 mm Distance between tie bars H: 570 mm Type: Horizontal Drive: Electric Bjveyfh Ule Stk Snjlc Hours: 34535 Available 3 units (2020-2019)

Condition: excellent (used), Year of construction: 2020, clamping force: 300 kN, Clamping force: 300 t Screw diameter: 60 mm Distance between tie bars V: 720 mm Blsv Sjyfh Rmetk Snsc Distance between tie bars H: 720 mm Type: Horizontal Drive: Hybrid Hours: 23000

Condition: excellent (used), Year of construction: 2011, Clamping force: 650 t Screw diameter: 90 mm Distance between tie bars V: 960 mm Distance between tie bars H: 1100 mm Shot volume: 2740 cm3 Type: Horizontal Bjv Ssyfh I Ejtk Snelc Drive: Hydraulic VIPER 40 Linear robot available The machine has approximately 61,600 operating hours. 6 core pulls on the moving platen, 2 cores and 4 cascade valves on the fixed platen.

Condition: like new (used), Year of construction: 2017, Machine: ENGEL VICTORY 500T / 7050 (Year 2017) Year of manufacture: 2017 Control unit: CC300 Operating hours: 565 h Availability: Immediate Clamping Unit: Clamping force: 500 tons Opening stroke: 1100 mm Distance between tie bars: 1500 × 1285 mm Platen size: 1500 × 1285 mm Minimum mould height: 500 mm Maximum daylight (open distance): 1600 mm Injection Unit: Screw diameter: 120 mm Screw length (L/D): 22 D Injection volume: 5430 cm³ Maximum injection pressure: 1600 bar General Data: Motor power: 98 kW Heating power: 30 kW Bjv Ssxvingetk Snjlc Clamping unit weight: 31 tons Injection unit weight: 15 tons Machine dimensions (L × W × H): 10.50 m × 2.30 m × 2.30 m Options: Core pullers: 3 Robot interface: No Bi-metallic screw/barrel: Yes Other equipment: STAUBLI magnetic platens, 24 hot runner heating zones Note: The machine has very low operating hours (565 h) and belongs to the modern ENGEL Victory tie-bar-less series, ideal for large moulds and high-precision production.

Condition: good (used), Year of construction: 2015, Moretto XD2 TS (2015) Hopper F1F30 DEHUMIDIFYING device XD2 TS 1KW Blsv Stoyfhyuok Snoc

Condition: good (used), Year of construction: 2011, Number of axis: 3 Reach: 1500 mm Payload: 5 kg X= 390mm Blev Stk Seyfhxkonec Y=1000mm Z=1500mm

Condition: good (used), Year of construction: 2011, functionality: fully functional, travel distance Z-axis: 1,500 mm, Equipment: documentation/manual, Number of axis: 3 Bsvoyfhw Ho Stk Snelc Reach: 1500 mm Payload: 5 kg X=420mm Y=1200mm Z=1500mm

Condition: used, Year of construction: 2005, Injection Moulding Machine Manufacturer: Krauss Maffei Model: KM350 /1900 C2 Year of manufacture: 2005 Clamping force: 3,500 kN Mould opening force: 220 kN Drive force of moving platen: open: 105 kN close: 95 kN Mounting platen size (H x V): 1,060 x 1,095 mm Clearance between tie bars (H x V): 710 x 710 mm Mould opening stroke: 920 mm Minimum mould installation height: 380 mm Maximum daylight: 1,300 mm Ejector stroke: 250 mm Ejector force fwd/return: 95 / 48 kN Pump motor: 75 kW Installed heating capacity: 30 kW Cylinder heating zones: 6 Dry cycle speed: 1,550 1/h Oil capacity: 720 ltr. Dimensions and weights: Bev Sjxu Uvajtk Snslc Net weight with control cabinet: approx. 16.0 t L/W/H: 6,510 x 2,040 x 2,380 mm Maximum mould weight: 4,780 kg Injection unit: Shot capacity: 1,900 Screw diameter: 70 mm Injection pressure: 1,778 bar Stroke volume: 1,047 cm³ Shot weight for PS: 953 g Injection flow rate: 527 cm³/s Screw speed, standard / optional: rpm 285 / 349 Screw drive power standard or stage 1: 95 PS Screw drive power optional or stage 2: 117 PS Nozzle contact force: 82 kN Fully hydraulic twin-platen clamping system PV control for injection unit MC4 32-bit microprocessor control Integrated operator panel with TFT colour display and 3.5" floppy disk drive for data backup Plasticizing: 1 complete thermoplastic plasticizing unit in wear-resistant design, screw diameter 70 mm with check valve and open nozzle Nozzle radius: 15.00 mm Nozzle diameter: 6.00 mm

Condition: used, Forming area max. (length,width) / mm max. depth of product positive / mm max. depth of product negative / mm Technical specifications: Roll diameter approx. 420mm Projection in width approx. 415mm Projection in height approx. 265mm Table size approx. 605 x 600 mm Belt speed 18 - 562 m/min. 8 levels Saw band length min./max. 3150 / 3260mm - Saw band speed over 4 gear stages and 2 engine speeds Bevewgi Sio Stk Snjlc - Saw blade butt welder IDEAL BS 0-16 with scissors and whetstone - swiveling work table in 2 axes Dimensions: approx. L x W x H 950 mm x 750 mm x 1900 mm Weight 600kg with table feed Description has been adopted.

Condition: good (used), Year of construction: 2005, Krauss Maffei 500-2700 C1 (2005) MC4 controll Clamping force: 500 t Screw diameter: 80 mm Type: Horizontal Drive: Hydraulic Clamping unit: Clamping force: 500 t Opening stroke: 1260 mm Tie bar spacing (H×V): 900×800 mm Platen size (H×V): 1270×1200 mm Injection unit: Screw Ø: 80 mm Max. inj. press.: 1829 bar Inj. vol.: 1433 cm³ Shot weight (PS): 1304 g Electrical equipment: Voltage: 400 V / 50 Hz Sepro Linear robot available Accumulator English, French, Czech language available. Bovjx H Au Ro Stk Snslc Hours: 61000

Condition: like new (used), Year of construction: 2018, Clamping force: 25 ton Version: Shuttle table Opening force/stroke min.- max. : 100/225 mm Mould height variable min.- max. : 122-222 mm Shuttle table stroke: 500 mm Wight on shuttle table. max. :120 kg Ejector force/stroke max. Bov Stk Sjyfg D Ssnolc : 16/40 kN/mm Screw: 22 mm Effective screw length L/D : 20 Screw stroke max. : 90 mm Stroke volume: 34 cm3 Shot weight: 31 g Injection pressure: 2.000 bar Working hours: 15.571 h

Condition: good (used), Year of construction: 2014, clamping force: 11,500 kN, Equipment: documentation/manual, MC6 controll panel Blue power Clamping force: 1150 t Tie bar distance HxV: 1580x1280 mm Screw diameter: 90 mm Shot weight: 2084 g Shot volume: 2290 cm3 Bsv Stk Ssyfgx Ajnelc Type: Horizontal Drive: Hydraulic

Condition: good (used), Year of construction: 1995, operating hours: 60,269 h, Brand: Cincinnati Milacron Model: CMS 60-25 BL Serial No.: 2008877/10 Screw Type: Single screw Bsv Stk Soyaa S Ssnjlc Year of manufacture: 1995 Operating hours: 60,269 hours Screw diameter: 60 mm L/D ratio: 25 L/D Motor power: 28 kW

Condition: used, kW: 30 Rotor diameter: 500 mm Blov Stkoxgtqyj Snec Rotor width: 1200 mm

Condition: excellent (used), Year of construction: 1999, operating hours: 80,188 h, machine/vehicle number: 322, Max. film width 700-800 mm Equipment / Additional information: Blov Stoq Nn Hcsk Snoc -GREINER STACKING / Transfer device R3 (Ref. No.: 95002.24) // M. No.: 00020 // Age: 1998 Heating from above and below Material PS and PP were processed 450 Ps // 350 Pp The following tools were used on the machine: 8-way WZ-Ø95 and 15-way WZ-Ø73 and 15-way WZ-Ø86 Packaging was produced especially for the dairy industry. The cycles are 18-25 strokes - depending on the cup weight.

Condition: ready for operation (used), Year of construction: 2019, operating hours: 25,500 h, clamping force: 10,000 kN, screw diameter: 110 mm, displacement volume: 3,136 cm³, Sumitomo SHI Demag EL-Exis SP 1000-6300 Bov Stkoygk Eio Snolc

Condition: ready for operation (used), Year of construction: 2018, clamping force: 1,900 kN, screw diameter: 45 mm, total height: 2,190 mm, overall weight: 8,900 kg, This HAITIAN ZHAFIR ZERES ZE1900 was manufactured in 2018. It is an electrical injection moulding machine, ideal for precision and efficiency in plastic processing. Consider the opportunity to buy this HAITIAN ZHAFIR ZERES ZE1900 electrical injection moulding machine. Contact us for more information. Additional equipment • Air valves: 2 Machine Benefits Technical Machine Benefits • Platen size: 840 x 790 mm • Distance between uprights: 570 x 520 mm • Installation height: 200 to 550 mm • Opening width: 470 mm • Max ejector stroke: 130 mm / max ejector bar length: 320 mm • Ejector coupling type: central haitian standard Ø 32mm / m16 • Centering ring: 160 mm / cascade control: 4-fold / core pulls bwap: 2 • Hot runner control units: external • Optional handling available Dimensions Blov Stk Sjx D H Nqonec Machine Depth 5980 mm

Condition: good (used), Year of construction: 2006, Controll: NC4 Clamping force: 250 tons Distance between tie bars: 630 x 630 mm Mold height: 330 x 830 mm Opening stroke: 675 mm Dylight max: 1505 mm Screw diameter: 50 mm Shot volume: 530 cm3 Shot weight: 482 g Bov Stk Ssrgw Exsnslc Injection pressure: 2426 bar Cores- 2 Hot runners- 12 + Robot Demag ergotech W733-0174 Year of manufacture: 2006 Handling capacity: 10 kg Number of axes: 3 Max range: 1000 mm X- 900 mm Y-1400 mm Z- 2500 mm

Condition: excellent (used), Year of construction: 2014, Equipment: documentation/manual, Arburg 470C 1500 400 (2014) Golden edition Clamping force: 150 t Bjv Stkex Elqre Snelc Screw diameter: 45 mm (wear resistant) Distance between tie bars V: 470 mm Distance between tie bars H: 470 mm Type: Horizontal Drive: Hydraulic Air blow 2 units Euromap 67 for robot 2 pumps machine Injection pressure incrased 10% (2500bar)

Condition: like new (used), Year of construction: 2021, functionality: fully functional, manual gasfiller Blsv Sjx Dtk Ietk Snjc

Condition: used, Year of construction: 2010, functionality: fully functional, Machine data • Gantry-type machine with stationary table and moving bridge for minimal footprint • Base, bridge, and bridge columns made of steel, welded in one piece, stress-relieved and machined • Main structural components consist of ribbed welded assemblies, optimized for the best possible rigidity-to-weight ratio, vibration damping, and high acceleration • Every machine design is verified and optimized using finite element analysis (FEA) to ensure maximum quality, performance, and safety • Easily accessible machine table enables simple loading and unloading with a forklift or overhead crane • Precision ground linear guides with high preload and additional cover strip on all axes for optimal chip protection • Brushless digital A/C servo motors and controllers on all axes • Single-sided (centered) drive on the X-axis (gantry drive) • Rack and pinion drive on X and Y axes • Precision ball screw spindle with double bearing support on Z-axis • Precision planetary gearboxes with minimal backlash • Fully enclosed cable drag chains to protect cables from chips and dust • High-quality shielded cable drag chain wiring for maximum reliability against interference and downtime • X-axis machining area: 1,540 mm • Y-axis machining area: 1,540 mm • Z-axis clearance: 150 mm • Z-axis travel: 240 mm • Network connection via Ethernet • Remote maintenance via Internet FlexiCAM control system • DIN-ISO 66025 G-code compatible • Includes TCP/IP network interface • 256 MB RAM • Simple operation via handheld control unit with display Bljv Stoybb N Isk Snsc Spindle with manual tool change • Power consumption: 5.6 kW • 5,000 to 24,000 RPM, infinitely programmable • Cooling via integrated electric blower Dust extraction for manual tool change • Hose connection diameter: 120 mm Work table • T-slot profiles Safety features • CE compliant according to DIN EN 13849 • Includes EMC filter, Emergency Stop • Light curtain system controlled by the machine controller

Condition: ready for operation (used), Year of construction: 2005, operating hours: 60,000 h, functionality: fully functional, clamping force: 9,500 kN, screw diameter: 105 mm, clearance between the columns: 1,400 mm, displacement volume: 4,546 cm³, injection pressure: 1,778 bar, injection weight: 4,137 g, Clamping force 950 kN Mould opening force, max. 665 kN Travel force movable platen opening 112 kN Travel force movable platen closing 117 kN Size of mould platens (h x v) 1960 x 1710 mm Distance between tie bars (h x v) 1400 x 1150 mm Mould opening stroke 1800 mm Mould height min/max 600/1200 mm Max. daylight 2400 mm Injection unit: Screw diameter 105 mm Ls/D ratio 23 Injection pressure 1778 bar Stroke volume 4546 ccm Shot weight (PS) 4137 gr. Injection rate 805 ccm/s Screw speed 126 1/min Plasticising rate max. 147 g/s Nozzle pressure 166 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 110 kW Bov Stox Hz I Nsk Snslc Installed heating capacity 59 kW Adjustable barrel heating zones 7 Reservoir capacity 1500 ltr. Dimensions and weights: Dimensions of the machine ca. 12,00 x 3,50 x 3,00 m Total machine weight 67000 kg Max. mould weight 20300 kg

Condition: excellent (used), Year of construction: 2015, Clamping unit: 50 tons Oppening stroke (max. kN/mm) : 30 / 250 Mould height (fixed/variable) min.-max. mm: ---/172/272 Platen daylight (fixed/variable) max. mm: ---/422-522 Blov Stksx H Nu Rs Snjc Shuttle table stroke: 650 mm Screw diameter: 20 mm Injection volume: 31 cm3 Shot weight: 29 g Injection pressure: 2500 bar Working hours: 7600 hours 1 x hydraulic core 1 x pneumatic core 6 x hot runners

Year of construction: 2005, condition: good (used), functionality: fully functional, The 4 auxiliary mills, high-stand mill, model C17.31 S from Wanner, are available for sale. The price is per mill. Technical specifications: Motor power: 4 kW Supply voltage: 400V/50Hz Rotor speed: 224 rpm Stator knives: 2 pcs Rotor knives: 12 pcs Chute opening: 170 x 310 mm Screen size: 5 mm (alternatively: 3-4-6-8) Throughput: 25-50 kg/h Weight: 175 kg Collection container: approx. 10 liters Bljv Stk Sjygq D Sonec

Condition: new, Year of construction: 2025, Cutting Mill PC52120R 75 kW in stock Rotor diameter (mm): 520 Rotor width (mm): 1200 Bsv Stksydclve Snslc Drive (kW): 75 Rotor knives (rows): 10 Stator knives (rows): 6 Weight (kg): 5200