Second-hand machinery for sale (200,000)

Condition: ready for operation (used), functionality: fully functional, grinding wheel width: 100 mm, grinding wheel diameter: 350 mm, overall weight: 2,000 kg, The machine was retrofitted and modernised in 2025. The modernisation includes the addition of automatic loading and automatic cycle functions. The user interface and control panel are available in English, German, and French. TECHNICAL DETAILS Grinding wheel dimensions (outer diameter x inner diameter x width): 350 x 127 x 100 mm Grinding wheel width: 100 mm Grinding wheel speeds: Infinitely variable Regulating wheel speed: 10 - 250 rpm Feed: Automatic Regulating wheel dimensions (outer diameter x inner diameter x width): 230 x 76.2 x 100 mm Regulating wheel width: 100 mm Maximum length to be straightened: 200 mm Workpiece diameter to be straightened: 1.5 - 50 mm Bljv Stksyb R R Is Snsc MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,800 x 1,300 x 1,600 mm Weight: 2,000 kg EQUIPMENT New coolant tank with paper filtration system

Condition: ready for operation (used), functionality: fully functional, center height: 125 mm, center width: 600 mm, grinding wheel diameter: 400 mm, grinding wheel width: 50 mm, grinding wheel bore: 127 mm, The motor and frequency inverter for the workpiece headstock have been replaced! Additionally, the control cabinet and wiring diagram have been renewed! TECHNICAL DETAILS Centre height: 125 mm (175 mm with riser blocks) Centre distance: 600 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Grinding wheel bore: 127 mm Swivel range: 270° Workpiece headstock speed: 20 rpm to 400 rpm Spindle taper: 5 MT Tailstock taper: 3 MT Table swivel: 10° Table feed speed: up to 6.0 m/min MACHINE DETAILS External grinding wheel motor: 4.0 kW Workpiece spindle motor: 2.2 kW Dimensions & Weight Blov Sjyb R Nqetk Snec Dimensions (L x W x H): 2,580 x 1,680 x 1,670 mm Machine weight approx.: 2,700 kg EQUIPMENT New control cabinet and new wiring diagram New motor and frequency inverter for the workpiece headstock 2-axis digital readout Coolant tank Geometry according to Kellenberger protocol Extensive accessories

Condition: ready for operation (used), Year of construction: 2005, operating hours: 20,634 h, functionality: fully functional, machine/vehicle number: 051116206, turning length: 1,000 mm, rotational speed (max.): 4,000 rpm, bar passage: 52 mm, controller model: Fagor 8040 TC, TECHNICAL DETAILS Swing diameter over bed: 450 mm Swing diameter over cross slide: 215 mm Turning length: 1,000 mm Bar capacity: 52 mm Spindle speed: 4,000 rpm MACHINE DETAILS Control unit: Fagor 8040 TC Dimensions & Weight Machine dimensions (L x W x H): 3,000 x 1,995 x 2,001 mm Machine weight: approx. 2,400 kg Operating hours: 20,634 h EQUIPMENT 4-position tool holder Tailstock Blev Seycu Igjtk Snsc Documentation

Condition: ready for operation (used), Year of construction: 1998, operating hours: 17,000 h, functionality: fully functional, turning length: 305 mm, spindle speed (max.): 5,000 rpm, swing diameter over bed slide: 440 mm, bar passage: 42 mm, controller model: Heidenhain Elektro Pilot 3190, TECHNICAL DETAILS Blsvsycu A Rs Stk Snec Swing diameter over bed: 440 mm Swing diameter over carriage: 210 mm Turning length: 305 mm Bar capacity: 42 mm Spindle speed: 5,000 rpm Turret: 12 stations Driven stations: 6 stations Tool holder: VDI 20 MACHINE DETAILS Control: Heidenhain Elektro Pilot 3190 Dimensions & Weight Machine dimensions (L x W x H): 2,800 x 1,651 x 1,771 mm Machine weight: approx. 3,000 kg Power-on hours: approx. 17,000 h EQUIPMENT Chip conveyor C-axis Driven tools Parts catcher Tailstock Documentation

Condition: ready for operation (used), Year of construction: 2014, operating hours: 38,800 h, functionality: fully functional, machine/vehicle number: 11415594804, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, controller model: Heidenhain iTNC 530, table load: 300 kg, TECHNICAL DETAILS Travel X-Axis: 500 mm Travel Y-Axis: 450 mm Travel Z-Axis: 400 mm Clamping surface: Ø 630 x 500 mm Swivel range: -5/+110 degrees Table load: 300 kg Speed: 10,000 rpm Spindle drive: 13 kW Bsv Stkoycuzto Snolc Tool magazine capacity: 60 Tool holder: SK 40 MACHINE DETAILS Control: Heidenhain iTNC 530 Operating hours Power-on hours: approx. 65,300 h Spindle hours: approx. 38,800 h Machine weight: 4,850 kg EQUIPMENT ECO Tower 60 by Lang NC swivel rotary table C+B axis 3D probe Renishaw Chip conveyor Paper belt filter coolant tank 600 l Internal coolant supply 20 bar Electronic handwheel Documentation

Condition: ready for operation (used), Year of construction: 2002, operating hours: 19,300 h, functionality: fully functional, turning length: 750 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 185 mm, travel distance Z-axis: 750 mm, swing diameter over bed slide: 320 mm, TECHNICAL DETAILS Swing diameter over bed: 320 mm Swing diameter over cross slide: 150 mm Turning length: 750 mm Travel X-axis: 185 mm Travel Z-axis: 750 mm Bar capacity: 52 mm Spindle speeds: 4,000 rpm Spindle nose: 55027/A6 DIN Spindle drive: 9 kW Rapid traverse X-axis: 10 m/min Rapid traverse Z-axis: 8 m/min Tailstock quill diameter: 70 mm Tailstock quill stroke: 120 mm Tailstock taper: MT 5 MACHINE DETAILS Control: Heidenhain Manuel Plus Dimensions & Weight Machine dimensions: 2,450 x 1,668 x 1,825 mm Machine weight: approx. 2.0 t Operating hours: approx. 19,300 h EQUIPMENT Blov Stoycuvkjk Snsc 3-jaw chuck Tailstock Multifix size B Documentation

Condition: ready for operation (used), operating hours: 28,339 h, functionality: fully functional, turning length: 450 mm, turning diameter: 300 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 160 mm, controller model: Siemens 840D ShopTurn, TECHNICAL DETAILS Turning diameter: 300 mm Turning length: 450 mm X-axis travel: 160 mm Main spindle speed range: 5,000 rpm Counter spindle speed range: 5,000 rpm Bar capacity: 65 mm Tool holder: VDI 30 Driven tool stations: 12 Bjv Stsycupqjk Snolc Driven tool speed: 5,000 rpm Rapid traverse X-axis: 60 m/min Rapid traverse Z-axis: 45 m/min MACHINE DETAILS Control: Siemens 840D ShopTurn Dimensions & Weight Required space with chip conveyor: 6,895 x 2,284 x 1,885 mm Machine weight: approx. 4.3 t Operating hours Power-on hours: 59,643 h Spindle hours: 28,339 h EQUIPMENT Chip conveyor Sub spindle Hainbuch collet chuck 65 mm Hainbuch collet chuck 42 mm Parts catcher Conveyor belt C-axis Driven tools Documentation

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2021, operating hours: 3,300 h, No reserve price – guaranteed sale to the highest bidder! Blev Stk Ssyc Ub Tensc Auction of a complete additive manufacturing production facility comprising several metal printers, sintering and washing units, as well as additional composite printers! The offering includes the following components: 3 Metal X 1 Sinter II 1 LMI Washing Unit 1 Mark Two Plastic Printer 1 OnyxOne Plastic Printer MACHINE DETAILS Operating hours: 3,300 h EQUIPMENT - Regularly serviced and maintained - Intuitive operation via touch displays - Software for print preparation and completion - Processing of a wide range of metal materials - Complete solution from design to finished component - Easy integration into existing setups

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 320 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 320 mm, table width: 320 mm, table length: 560 mm, TECHNICAL DETAILS X-axis travel: 320 mm Y-axis travel: 220 mm Z-axis travel: 320 mm Maximum workpiece dimensions: 880 mm x 550 mm x 225 mm Table dimensions: 560 mm x 320 mm Blov Stkeya Efwj Snsc MACHINE DETAILS Control: Charmilles Weight: 3,500 kg

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 650 mm, controller model: Siemens 840 D, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Travel X-axis: 650 mm Travel Y-axis: 500 mm Travel Z-axis: 650 mm B-axis: 360,000 x 0.001 mm Pallet size: 400 x 500 mm Spindle speed: 50 – 10,000 rpm Tool holding system: SK 40 Bjv Stk Soya Ed Henslc Number of tools in magazine: 60 Rapid traverse: 40 m/min Feed rate: 1 – 20,000 mm/min MACHINE DETAILS Control system: Siemens 840 D Power requirement: 65 kW

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, spindle bore: 65 mm, spindle speed (max.): 5,000 rpm, bar passage: 60 mm, controller model: Siemens 840D Powerline, counter spindle speed (max.): 5,000 rpm, TECHNICAL DETAILS Spindle bore: 65 mm Bar capacity: 60 mm Main spindle max. speed: 5,000 rpm Counter spindle speed: 5,000 rpm MACHINE DETAILS Control: Siemens 840D Powerline Machine weight: 3,500 kg EQUIPMENT C-axis IEMCA bar feeder Master 880/33 HF (bar length up to 3,200 mm) KSS coolant supply / cooling unit Blsv Stksya Ecvo Snsc Hinged belt chip conveyor

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, grinding wheel diameter: 200 mm, workpiece length (max.): 200 mm, TECHNICAL DETAILS Grinding wheel diameter: 100–200 mm Maximum workpiece length: 200 mm MACHINE DETAILS Control: Siemens 840D or equivalent CNC axes: 3–5 axes Drive power: 5–10 kW Coolant tank: 100–200 litres EQUIPMENT Coolant filtration system Bsv Stk Sjya Dy Hjnelc Universal applicability for different tool types and geometries High flexibility through CNC programming and adaptable clamping devices Process reliability thanks to integrated cooling and filtration system Easy maintenance due to modular design and central supply units

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, table load: 400 kg, rotational speed (max.): 8,000 rpm, TECHNICAL DETAILS X-axis: 760 mm Y-axis: 400 mm Z-axis: 400 mm Table size: 1,020 x 410 mm Max. table load: 400 kg Spindle speed: 8,000 rpm Tool holder: CAT 40 / BT 40 Tool changer: 20 positions Accuracy Positioning accuracy: ±0.01 mm Repeatability: ±0.005 mm Blov Stkeya Dw Sj Snoc MACHINE DETAILS Control: MAZATROL M-PLUS EQUIPMENT Robust construction Fully hydraulic table Stable cast iron structure Suitable for aluminium, steel and plastics User-friendly programming Integrated simulation and diagnostic software Regularly serviced Coolant and lubrication systems intact

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 610 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 510 mm, table load: 400 kg, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS X-axis travel: 610 mm Y-axis travel: 410 mm Z-axis travel: 460–510 mm Table size (L × W): 700 × 410 mm Maximum table load: approx. 400 kg per pallet T-slots: 18 × 4 mm Pallet changer: Automatic pallet changer (APC) Changeover time: ~4 seconds Pallet clamping: 3-point clamping system (patented) Spindle taper: BT-40 / ISO40 Maximum spindle speed: 8,000 rpm Spindle motor: approx. 9 kW Tool magazine (ATC): 24 positions Tool capacity: 24 Maximum tool diameter: approx. 80–125 mm Maximum tool length: up to ~250 mm Maximum tool weight: approx. 7 kg per tool Tool change time: Rapid change arm Rapid traverse speed (X/Y/Z): up to approx. 30 m/min Feed rate: up to approx. 10,000 mm/min Axes: 3 axes (X / Y / Z) MACHINE DETAILS Dimensions & Weight Machine dimensions (L × W × H): approx. 2,360 × 4,365 × 2,878 mm Blevoya Dlcs Stk Snjc Machine weight: approx. 7,500 kg EQUIPMENT Automatic pallet changer (APC) 3-point clamping system for pallet fixing FANUC CNC control (e.g. 0iMB) LCD color display Automatic lubrication pump Coolant system incl. wash hose Chip conveyor Work light Electronic handwheel (MPG)

Condition: ready for operation (used), Year of construction: 2004, operating hours: 61,082 h, functionality: fully functional, travel distance X-axis: 2,800 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 800 mm, controller model: HEIDENHAIN TNC 426, Equipment: chip conveyor, In January 2025, a new spindle was installed! The machine has been regularly maintained! TECHNICAL DETAILS Travel range X-axis: 2,800 mm Travel range Y-axis: 1,200 mm Travel range Z-axis: 800 mm Feed rates Rapid traverse: 35,000 mm/min Spindle speed S1 (continuous duty) Vertical: 10,000 rpm Spindle speed S1 (continuous duty) Universal swivel head, 2 axes: 18,000 rpm MACHINE DETAILS CNC Control: HEIDENHAIN TNC 426 Electrical data Supply voltage: 400 V (–15 %, +10 %) Frequency: 50 Hz Current draw: 101.1 A Installed total power: 59.8 kW Operating hours Power-on hours: 98,755 h Program run time: 61,082 h EQUIPMENT High-rigidity gantry design from the FPT DINO series Precision linear guides and ball screws Bjv Stk Sjya Dnkonslc Spacious work area with 2.8 m X-axis travel High feed rates for efficient machining Ideal for tool, mold, and machine construction Includes documentation and acceptance certificate according to ISO standards Tool changer Coolant system Chip conveyor Interchangeable milling head with 4th/5th axis

Condition: ready for operation (used), operating hours: 8,722 h, functionality: fully functional, travel distance X-axis: 750 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, table load: 400 kg, spindle speed (max.): 8,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel (X-axis): 750 mm Travel (Y-axis): 500 mm Travel (Z-axis): 500 mm Table dimensions: 1,000 × 500 mm Number of T-slots: 3 Maximum table load: 400 kg Drilling performance Maximum drilling diameter (steel with tensile strength 600 MPa): 25 mm Drilling diameter with removable inserts from SK: 30 mm Thread cutting diameter: M20 Spindle Taper spindle bore: 40 (7:24) Tool shank: DIN 69871 Spindle diameter for bearings: 70 mm Distance spindle – table surface: 150–650 mm Spindle speed: 20–8,000 rpm Positioning accuracy Static deviation of the plane: 0.02 mm Repeatability: 0.008 mm Rapid traverse: 25,000 mm/min Feed rate: 5,000 mm/min MACHINE DETAILS CNC control manufacturer: Heidenhain Coolant system Nominal flow rate hydraulic generator for tool cooling: 32 l/min Nominal flow rate hydraulic generator for internal cooling: 60 l/min Maximum tank volume: 280 l Pneumatics Operating pressure: 0.6 MPa Operating hours Control powered hours: 30,743 h Machine powered hours: 25,946 h Bovjygl Tue Stk Snolc Program runtime: 8,722 h EQUIPMENT NC machine vice Various toolholders Drill chuck Face milling heads 4-fold clamping fixture suitable for vice 3D probe

Condition: ready for operation (used), Year of construction: 2008, operating hours: 41,795 h, functionality: fully functional, travel distance X-axis: 1,760 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 800 mm, controller model: Siemens 840 D ShopMill, rotational speed (max.): 6,000 rpm, The sliding surface of the base carriage X/Y was renewed in 2022! TECHNICAL DETAILS Travel range X-axis: 1,760 mm Travel range Y-axis: 600 mm Travel range Z-axis: 800 mm horizontal Travel range Z-axis: 770 mm vertical A-axis: ±100° Faceplate diameter: 520 mm Blsv Seyfriaotk Snec Rapid traverse X/Y/Z: 40/40/30 m/min Number of controlled axes: 5 Spindle speed range: 30 - 6,000 rpm Drive power: 30 kW Torque: 143 Nm Tool holder: SK 40 Tool stations: 36 MACHINE DETAILS Control: Siemens 840 D ShopMill Dimensions & Weight Required floor space (L x W x H): 5.2 x 3.4 x 3.3 m Machine weight: 12,000 kg Operating hours: 41,795 h EQUIPMENT NC rotary table AXA RTA 4L-520 Manual tailstock, center height 280 mm Internal coolant supply (IKZ): 30 bar Chip conveyor, discharge left Integrated coolant tank 200 l Coolant tank 400 l 3D touch probe, Renishaw RMP 60 with RMI receiver Direct linear measurement system Heidenhain Hardened flat guides Counter-guides coated with sliding material (Turcite)

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 2,300 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, controller model: Siemens Sinumerik 840D, rotational speed (max.): 18,000 rpm, TECHNICAL DETAILS Travel X-axis: 2,300 mm Bov Stk Seyfq T Denelc Travel Y-axis: 800 mm Travel Z-axis: 600 mm Spindle speed range: 50 - 18,000 rpm Tool holder: HSK 63 Tool positions: 30 Table size: 1,400 mm x 750 mm (right side) MACHINE DETAILS Control: Siemens Sinumerik 840D EQUIPMENT NC rotary table 800 (left side) Chip conveyor Internal coolant supply (IKZ)

Condition: not inspected (used), Year of construction: 2006, functionality: unexamined, machine/vehicle number: 5601-0267, turning diameter: 33 mm, overall weight: 4,200 kg, rotational speed (max.): 8,000 rpm, travel distance Z-axis: 320 mm, Equipment: bar feeder, TECHNICAL DETAILS Turning diameter: 33 mm Z-axis travel: 320 mm Rapid traverse (X/Z): 30 m/min Max. ejection: approx. 190 mm Max. spindle speed: 8,000 rpm Tool stations: 5+3 MACHINE DETAILS Bsv Stjyfqt Djk Snslc Control: GE Fanuc Series 16i-T Drive power: 5.5 / 7.5 kW Dimensions & Weight Required space (L x W x H): 3.08 x 1.51 x 1.75 m Machine weight: 4,200 kg EQUIPMENT Iemca bar feeder

Condition: not inspected (used), functionality: unexamined, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 1,200 mm, rotational speed (max.): 3,000 rpm, controller model: Heidenhain iTNC 530, The machine underwent a general overhaul in 2011! TECHNICAL DETAILS Travel X-axis: 1,600 mm Travel Y-axis: 1,300 mm Travel Z-axis: 1,200 mm B-axis: 360° Speed range: 12 - 3,000 rpm Table size: 1,200 mm x 1,000 mm Blov Stk Soyfpu Tjnec Maximum table load: 12,000 kg Tool holder: SK 50 Tool positions: 54 MACHINE DETAILS Control: Heidenhain iTNC 530 Drive power: 22 kW

Condition: not inspected (used), Year of construction: 2004, functionality: unexamined, travel distance X-axis: 1,060 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller model: Ultimax 4, rotational speed (max.): 10,000 rpm, TECHNICAL DETAILS Travel X-axis: 1,060 mm Travel Y-axis: 610 mm Travel Z-axis: 610 mm Rapid traverse X/Y/Z: 30 m/min Distance table surface to spindle nose: 150 - 760 mm Speed range: 10,000 rpm Spindle motor: 15 kW Tool holder: SK 40 Tool changer: 24 positions Table size: 1,300 x 630 mm Max. table load: 1,100 kg MACHINE DETAILS Control: Ultimax 4 Bev Sjyfpi Dstk Snslc Connected load: 24 kW Dimensions & weight Required space (LxWxH): 4.9 x 3.8 x 2.75 m Machine weight: 6,500 kg EQUIPMENT Chip conveyor

Condition: not inspected (used), Year of construction: 1999, functionality: unexamined, machine/vehicle number: 27578701, turning length: 1,050 mm, turning diameter: 520 mm, spindle bore: 77 mm, rotational speed (max.): 5,000 rpm, controller model: Siemens Sinumerik, TECHNICAL DETAILS Max. turning length: 1,050 mm Turning diameter: 520 mm Max. turning diameter over cross slide: 440 mm Spindle bore: 77 mm Max. spindle speed: 5,000 rpm Drive power: 22 / 15 kW Torque: 672 / 168 Nm Tool interface: HSK 50 Tool stations: 96 TURRET Tool interface: VDI 40 Tool stations: 12 + 12 Driven tools: 12 MACHINE DETAILS Blev Stksyfphgj Snec Control: Siemens Sinumerik EQUIPMENT Chip conveyor Coolant system Filter system B-axis Swiveling counter spindle

Condition: not inspected (used), Year of construction: 2000, functionality: unexamined, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain TNC 426 / 430, spindle speed (max.): 18,000 rpm, TECHNICAL DETAILS Travel distances X-axis: 1,000 mm Y-axis: 800 mm Z-axis: 500 mm The machine received a new spindle in 2021! Speed range: 18,000 rpm Tool holder: SK 40 Tool positions: 30 Table size: 1,250 mm x 800 mm Max. table load: 1,200 kg MACHINE DETAILS Machine type: DMG DMC 100 V hidyn Control: Heidenhain TNC 426 / 430 Year of manufacture: 2000 New spindle: 2021 Bev Seyfpc Djtk Snelc EQUIPMENT Chip conveyor Heidenhain TS 632 touch probe Blum laser tool breakage control

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, machine/vehicle number: 10089060/30042621, total length: 5,300 mm, total width: 2,100 mm, total height: 2,300 mm, year of last overhaul: 2024, The machine was last overhauled in 2024! Bov Stk Seyfv Exonolc TECHNICAL DETAILS Material loading area: 4,000 mm x 2,000 mm MACHINE DETAILS Dimensions (L x W x H): 5,300 x 2,100 x 2,300 mm EQUIPMENT Service and inspection history available from 2019

Condition: used, machine/vehicle number: 006488, X axis working area: 2500 mm Bev Stk Sjwuclxenolc Y axis working area: 850 mm Main Electrospindle power: 5 KW Number of controlled axes: 3 axes Total number of drilling spindles: 11