Year of construction: 2004, condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 9,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 630 mm, spindle speed (max.): 24,000 rpm, machine/vehicle number: 031809, TECHNICAL DETAILS X-axis travel: 9,500 mm Y-axis travel: 1,000 mm Z-axis travel: 630 mm Feed rate X-axis: 70 m/min Feed rate Y-axis: 40 m/min Feed rate Z-axis: 40 m/min Swivel angle A-axis: ±110°, freely programmable in 0.1° increments Swivel angle C-axis: ±182°, freely programmable in 0.1° increments Spindle speed: max. 24,000 rpm Spindle power: 15 kW S1 Maximum milling cutter diameter: 100 mm Maximum disc milling cutter diameter: 100 mm Maximum saw blade diameter: 400 mm Tool holder: HSK-63F MACHINE DETAILS Compressed air connection: 7 bar Electrical connection: 400 V, 3~, 50 Hz, 80 A Air consumption: approx. 200 l/min with misting EQUIPMENT Machining operations: milling, drilling, tapping, thread milling, notching, and sawing with stationary profile bar 6-sided machining: front optional, underside possible Profile protection: machining with stationary profile bar Robust, low-wear direct drives on all axes Axes: 5-axis CNC control for complex 3D machining Display: 15-inch colour monitor Interfaces: USB ports, network connection 2-layer machining for pendulum operation Associated tooling (HSK tool holders) Two circular saws for aluminium Bsv Sjycul Sotk Snjlc Note: Documentation for disassembly of the machine is included.

Condition: used, Hydropneumatic operation Max. punching height: 90 mm Abutment stroke: 100 mm Punching stroke: 20 mm Pressing force: 30 kN Bljv Seygl Acstk Snjc Max. profile height: 100 mm Weight: approx. 280 kg

Condition: used, Hydropneumatic operation Blev Stjw Inudsk Snec Max. punching height: 90 mm Abutment stroke: 100 mm Punching stroke: 20 mm Pressing force: 30 kN Max. profile height: 100 mm Weight: approx. 280 kg

Year of construction: 2001, condition: used, Saw blade diameter vertical: 600 mm Saw blade diameter (horizontal): 500 mm Ejecting width: processing of profiles up to 300 mm at 90°, mitre tips up to 30° Bev Steygkn Dok Snslc Profile height max. 280 mm Engagement depth: at 90° horizontal up to 185 mm / at 90° vertical up to 230 mm Material stop: swiveling 30° - 90° - 45° Pivoting material stop with locking points and digital display Motorized latch height adjustable with digital display Motorized adjustment of the angles with digital display Hydropneumatic material feed via 2-hand operation Pneumatic material clamps coolant lubrication

Year of construction: 2014, condition: used, Machining center with 3 CNC-controlled axes and automatic tool rotation to three fixed positions, enabling 3-sided machining of the workpiece. For processing bars or pieces made of aluminum, PVC and general lightweight metal alloys and steel up to a thickness of 2 mm. Max. travel path X-axis: 3,000 mm Max. travel range Y-axis: 274 mm Max. travel range Z-axis: 390 mm Spindle speed: 20,000 RPM. 2 tool changers with 4 slots on the left and 4 slots on the right Windows operating system Pneumatic material stop on the right and left side Automatic belt tensioner displacement Only 3710 spindle hours Cam Plus Accessories as per photo Weight: approx. 1600 kg Operating Instructions Blov Soygkhdstk Snsc

Year of construction: 2001, condition: used, Max. saw blade diameter: 350 mm Pneumatic material clamps Table rotateable left and right Bsv Stkeygin No Snolc Manual feed

Condition: good (used), Double Mitre Saw DG79 - 2 x 2 kW Bev Stjygm Akek Snslc - 380 Volt - Year of manufacture: 1988 - 2100 / 3800 rpm - Saw blade Ø 330 mm - Cutting range at 90°: 195 x 90 mm; at 45°: 135 x 90 mm - Minimum cutting length 500 mm, maximum approx. 3300 mm - Compressed air 6-8 bar / 250 l/min - Weight: approx. 500 kg - Pneumatic clamping system

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 20186/2006/01, travel distance X-axis: 7,200 mm, travel distance Y-axis: 480 mm, travel distance Z-axis: 325 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 7,200 mm, feed length Y-axis: 480 mm, feed length Z-axis: 325 mm, controller manufacturer: Elumatec, workpiece length (max.): 7,200 mm, spindle speed (max.): 6,000 rpm, spindle motor power: 5,500 W, number of spindles: 1, number of slots in tool magazine: 8, input voltage: 400 V, type of input current: three-phase, Equipment: rotational speed infinitely variable, 2006 Elumatec SBZ 130 Profile Machining Centre – High-Performance Aluminium CNC Machine 📍 Location: Ireland 🛠️ Machine Type: 3-Axis CNC Profile Machining Centre 📅 Year of Manufacture: 2006 ✅ Condition: Very Good / Fully Operational 🔧 Brand: Elumatec – German Engineering Excellence 🔧 Machine Description: The Elumatec SBZ 130 is a high-precision CNC profile machining centre designed for efficient and versatile processing of aluminium, steel, and stainless steel profiles. With fully automatic 3-axis control and flexible machining capabilities, it's ideal for manufacturers in the window, door, façade, and industrial profile fabrication sectors. 🧰 Included Features & Equipment: Automatic Tool Turret with 8 Tool Positions • Holds standard tools or angle milling heads • Rapid rotation ensures minimal tool change times 2 x Angle Milling Heads – included for advanced profile cutting Automatic Length Measurement – improves precision and workflow Two Independent Machining Zones – for pendulum operation and non-stop production Tool Spindle with Additional Axis Functionality – enhances machining flexibility All Operations Performed with Stationary Profile Bar • Protects profile surface during milling, drilling, and threading Multi-position Pneumatic Clamping System Coolant & Minimum Quantity Lubrication System (MQL) Tool Holders in photos Included This 2006 model is in very good condition, fully functional, and ready to be put into service. 📐 Technical Specifications: X-axis Travel (Longitudinal): 7,200 mm Y-axis Travel (Transverse): 480 mm Z-axis Travel (Vertical): 325 mm Spindle Power: 5.5 kW Max Spindle Speed: 6,000 rpm X Axis Rapid Traverse: 60 m/min Y Axis Rapid Traverse: 30 m/min Z Axis Rapid Traverse: 30 m/min Tool Changer: Automatic 8 position magazine Angle Milling Heads: 2 Angle Milling Heads Speed: 10,000 rpm Control System: Elumatec ELMU with full NC control Machining Capabilities: • Drilling, Routing, Tapping, Notching, Slotting • Machining on 3 sides of the profile without repositioning Clamping System: Pneumatic profile clamps (movable and programmable) Compressed Air Connection: 7 Bar Compressed Air Consumption: 75 L/min with spraying Cooling/Lubrication: Minimum quantity lubrication (MQL) system Operation: Front-loading with safety light curtain 🧰 Machine Includes: Multi-position automatic tool changer Angle Milling Heads x 2 Pneumatic profile clamping system Cooling/lubrication system Operator control console Selection of tool holders as seen in photos 💡 Key Features & Benefits: German-built machine with exceptional reliability High-speed 3-axis control for complex machining tasks Machining without profile repositioning – improved productivity Perfect for aluminium window & door fabrication, curtain wall profiles, industrial extrusion machining Can be integrated into automated production lines Ready to work – tested Elumatec SBZ 130 for sale used Elumatec machining centre CNC aluminium profile machining centre 3 axis profile router, aluminium window door CNC machine Bjv Stkewwau No Snelc Elumatec CNC machine Ireland CNC notching machine used façade profile machine high-speed CNC profile mill Elumatec SBZ CNC profile router

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 11900715/C, saw blade diameter: 350 mm, feed length X-axis: 180 mm, feed length Z-axis: 170 mm, total length: 2,210 mm, total width: 1,100 mm, total height: 1,550 mm, cutting range round steel at 90°: 120 mm, cutting range round steel at 45°: 120 mm, type of input current: three-phase, rotational speed (min.): 15 rpm, rotational speed (max.): 90 rpm, cutting height (max.): 170 mm, overall weight: 530 kg, saw blade speed: 90 rpm, input voltage: 400 V, cutting range square steel at 45°: 100 mm, cutting range square steel at 90°: 105 mm, saw drive: 2,200 W, cutting diameter: 120 mm, saw blade bore: 32 mm, 2000 MEP Cobra 350AX Automatic Circular Cold Saw – Efficient Metal Cutting for Industrial Production Available now: MEP Cobra 350AX, a robust automatic cut-off circular saw, perfect for industrial metal cutting applications. Manufactured in 2000 and in good working condition, this machine combines manual and automatic operation modes, adjustable cutting settings, and a 350mm blade to deliver consistent, high-quality cuts. 🔧 Key Features: Blade Size: 350 × 32 × 2.5mm Spindle Motor Power: 2.2kW Blade Speeds: 15 / 30 / 45 / 90 rpm Vice Opening: 160mm Clamping Type: Pneumatic Power Supply: 400V / 3 Phase / 50Hz Manual & Automatic Modes: Yes Cutting Depth & Stop Height: Fully adjustable Machine Weight: 530kg Dimensions (L×W×H): 2210 × 1100 × 1550mm 📏 Cutting Capacities: At 0°: Round: 120mm Rectangular: 180 × 170mm Square: 105 × 105mm At 45° Left: Round: 120mm Rectangular: 135 × 60mm Square: 100 × 100mm At 45° Right: Round: 110mm Rectangular: 135 × 60mm Square: 95 × 95mm ⚙️ Ideal Applications: Cutting steel profiles, tubes, bars Suitable for light to medium-duty industrial production Great for fabrication shops, stockholders, and manufacturing plants ✅ Why Choose the MEP Cobra 350AX? Versatile cutting angles and profiles Dual operation mode (automatic/manual) Compact, efficient, and easy to integrate into existing workflows Pneumatic clamping ensures safety and consistency Low investment cost means big savings on a high-value machine MEP Cobra 350AX for sale Used automatic circular saw Cold saw for metal cutting Pneumatic clamping cold saw 350mm circular saw machine Industrial metal cut-off saw MEP saw 2000 model Automatic metal saw Ireland Bjv Stkjwtr Iyj Snjlc Circular saw for steel profiles 400V industrial cold saw

Year of construction: 2004, condition: excellent (used), functionality: fully functional, 2004 Elumatec AKS 134 Notching Saw – High-Precision Notching for Curtain Walls, Skylights & Conservatories Manufacturer: Elumatec Model: AKS 134 Year: 2004 Condition: Very Good Now available: Elumatec AKS 134 Notching Saw, manufactured in 2004 and in very good condition. This robust, German-engineered machine is purpose-built for precise notching in aluminium profiles, specifically designed for fabricators working on curtain walls, conservatories, skylights, and other complex architectural aluminium systems. The AKS 134 features a dual-saw unit design — vertical and horizontal — offering exceptional flexibility, accurate angles, and safe operation. Combined with digital angle displays, hydro-pneumatic feed, and automated cutting cycles, this is a premium choice for serious aluminium fabricators. 🛠️ Key Technical Specifications: 🔻 Lower Vertical Saw Unit: Saw Blade Diameter: 550 mm Tilting Range: +45° forward to -60° rear Bsv Sjxyupkjtk Snelc Max Cutting Height: 210 mm Motor Power: 3 kW (with motor brake) Speed: 2,800 rpm Manual Tilt Adjustment with Digital Display 400V, 3~, 50Hz 🔺 Upper Horizontal Saw Unit: Saw Blade Diameter: 500 mm Tilting Range: +55° down to -60° up Max Notching Depth: 190 mm Motor Power: 3 kW (with motor brake) Speed: 2,800 rpm Travel Distance: up to 830 mm Manual Tilt Adjustment with Digital Display 400V, 3~, 50Hz ⚙️ Machine Features: Dual saw blades for versatile and complex notching Workpiece stays fixed – only the saw units move, enhancing precision Simultaneous vertical saw unit height adjustment via handwheel (with analogue readout) Digital angle displays for both saws and pivoting back fence Manually adjustable support table Horizontal and vertical pneumatic clamping Automatic cutting cycle at 90° with two-hand safety control for angled cuts Hydro-pneumatic saw feed for smooth, consistent cutting Compressed Air Supply: 7 Bar (35–45L per cycle) 📏 Machine Dimensions & Weight: Footprint: 3000 × 1420 × 1600 mm Weight: 1,250 kg 🏗️ Ideal For: Aluminium façade and curtain wall manufacturers Skylight and conservatory fabricators Precision aluminium notching applications Workshop environments needing multi-angle notching in high volumes 🧰 Reliable, accurate, and engineered for demanding tasks, the Elumatec AKS 134 is a proven performer in the architectural aluminium industry. Elumatec AKS 134 for sale Aluminium notching saw Ireland Curtain wall notching machine Elumatec saw for curtain wall systems Notching saw for aluminium profiles Elumatec AKS 134 specifications 550mm notching saw Double blade notching saw Used Elumatec machinery Aluminium construction saw

Year of construction: 2016, condition: excellent (used), functionality: fully functional, X-axis positioning speed HS version: 50 m/min Beveygr H Io Stk Snjlc Electronic control of intermediate angles Max. internal inclination: 45° Max. external inclination: 15° Electronic CNC feed axis for the saw blade Usable cutting length, depending on model: 5 m Saw blade diameter: 550 mm Conveyor belt for step-by-step or automatic cutting Windows XPE operating system 10.4” color graphic TFT display – 800x600 (SVGA) Touch screen functionality

Condition: used, Automatic feed via Diethei PD 100 control Blevsvuruko Stk Snec For attachment on the right Max. insertion length: 2000 mm Good condition

Year of construction: 2011, condition: reconditioned (used), functionality: fully functional, X-axis travel (longitudinal axis) 4300 mm Y-axis travel (transverse axis) 270 mm Z-axis travel (vertical axis) 300 mm Bov Stk Sovi N H Tjnelc Electrospindle 1 HSD - max 18000 rpm - power 5.5 kW Tool magazine capacity 8 Bevel gearbox for lateral machining Number of vices 4 Vices positioning: automatic Weight 1950 kg

Year of construction: 1991, condition: good (used), Underfloor circular saw, crosscut saw, pull saw, chop saw, sliding table saw, table saw, circular saw, panel saw -Manufacturer: Altendorf, sliding table saw type TKR 45 -Main motor: Bauknecht 5.5 kW with brake Bljv Stk Somydmbonoc -Scorer motor: Emod 0.75 kW -Speed: 3000/4000/5000 rpm -Saw blade: Ø 300 mm / max. Ø 350 mm -Max. Cutting height: 90° 95 mm / 45° 70 mm -Miter cut: up to 45° -Cutting width: 2250 mm -Table length: 1400 mm -Dimension total 3480/1530/H1370mm -Weight: 1104 kg

Year of construction: 2002, condition: used, Max. cutting length: 3000 mm Max. saw blade diameter: 380 mm Cutting area at 90°: 195 x 120 mm Cutting area at 45°: 135 x 120 mm Bljv Stjyabzuek Snoc Minimum quantity spray device Pneumatic material clamps Miter cuts possible on both sides 2-Hand-Bedienung

Year of construction: 2014, condition: good (used), functionality: fully functional, FOM INDUSTRIE DALI 70 Blev Stk Soxcywlsnsc For profiles up to 7m 6.5KW Electrospindle ISO30 10 tool magazine on head (some tools are included) 8 Vices with independent positioning Automatic lubrication of guide blocks and recirculating ball screw lead screws Pendular machining MQL Barcode Reader Dimension 8600x2050 Weight 3900KG Can be loaded on truck

Condition: new, HSK 63 angle head Blov Stoygc Trsk Snsc NEW for Emmegi machine

Condition: like new (used), Year of construction: 2023, operating hours: 2,878 h, functionality: fully functional, We are offering this MECAL MC 304 Ariel – 5 MDT in almost new condition, year of construction 2023. Manufacturer: MECAL Model: MC 304 Ariel – 5 MDT Year of manufacture: 2023 The Mecal MC 304 Ariel-5 is a state-of-the-art 5-axis CNC machining center, perfectly suited for companies in the metalworking and construction industries. It is designed for high-speed machining of various materials such as brass, steel, aluminum, and PVC. Technical specifications Weight (kg): 6500 RPM: 20000 Width (mm): 2500 Height (mm): 2650 Length (mm): 11800 X-axis travel (mm): 9500 Y-axis travel (mm): 1400 Z-axis travel (mm): 700 C-axis travel (mm): 22 A-axis rotation (deg): 120 Tool magazine: 12 Motor power (kW): 11 Max. blade diameter: 400 Cooling type: Coolant fluid Blovoyft Iqj Stk Snoc Spindle interface type: HSK-F63 If you have any questions or would like more information, please feel free to send us a message or call us.

Year of construction: 2018, condition: used, 5-axis machining center with tool changer for aluminum or PVC profiles Max. processing length: 10,500 mm Travel path Y-axis: 1100 mm Travel stroke of Z-axis: 655 mm Swivel angle B-axis: 0° - 90° Angle C-axis: 0° - 360° Max. speed 24,000 rpm. Tool changer with 16 standard tool positions plus saw blade and angle head Central lubrication Many tool holders, including angle head and saw blade (500 mm) minimum quantity spraying Clamp detection and automatic shifting 12 pneumatic material clamps Barcode scanner and label printer Swarf Conveyor made of metal Angle head for machining from below Extraction for cabin Pendulum operation through two light barrier areas Manual control console Spindle hours: about 7500 The loading is included in the price, machine is already dismantled Weight: approx. 14,000 kg Bljv Stkjx Up Uaj Snoc

Year of construction: 2024, condition: as good as new (ex-display), XX100329 FMC 120 - CNC machining centre 1x PR204851 5-position automatic tool magazine (ISO 30) Bev Stk Seyfg Uwsnelc 1x PR-28965 Rotation of the work table to intermediate angles with manual stop 1x ZP714617 Custom 2D milling module FST CAM 4 1x PR-27602 TOOL SET ALUMINIUM TYPE 1 1x PR207680 4 motorized clamps – 2 pneumatic stops

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, overall weight: 55 kg, ❇️ Schüco Base Press 280 226 + Punch Units | Window Production | Pneumatics | Fully Functional For sale is a Schüco base press designed for professional use in aluminum window and façade construction. This machine comes from a window fabrication workshop and is in excellent, well-maintained, and fully operational condition. Ideally suited for punching and profile machining with interchangeable tool holders. Inspection and functional testing on-site possible at any time. ⸻ Blov Stex Rpdgek Snsc ❇️ Technical Specifications – Base Press (Manufacturer Information) • Manufacturer: Schüco • Model: Base Press • Art.-No.: 280 226 • Year of manufacture: 2004 • Max. operating pressure: 0.8 MPa • Air consumption: approx. 4 l / stroke • Stroke: 20 mm • Weight: approx. 55 kg • Design: pneumatic • CE marking present ⸻ ❇️ Features & Scope of Delivery • Schüco Base Press 280 226 • Several punching units / tool holders (including Art.-No. 280 612 / 280 614) • Foot pedal • Pneumatic connections • Accessories and tools as shown in the photos ➡️ Sale as a complete package; individual tools may be available upon request ⸻ ❇️ Condition & Notes • Fully functional • Well-maintained industrial use, normal signs of wear • No known repair or maintenance backlog ⸻ ❇️ Price & Handling €2,200 net plus VAT (complete package) • Sale on behalf of the customer • Invoice with VAT shown available • Delivery possible upon agreement and subject to additional cost • Location: 72229 Rohrdorf • Loading facility on-site via indoor crane available ⸻ ⚠️ Additional accessories and machinery for workshop, window, and metal construction are available in my other listings. ‼️ Please be sure to check my other offers as well – it's worth a look!

Condition: good (used), Pneumatic press, pneumatic punch press, multi-function punch press, punch press, universal punch press, punching machine, hydraulic press, basic press, punching press -Manufacturer: Schüco, base press with base -Item No.: 280 226 with base 299 504 -Stroke: 20 mm -Pressing force: 32 kN -Operating pressure: 7 bar -Operation: via foot switch -Receiver: Groove 16/28 mm, see photo technical drawing Bljv Stkjx Tdmnj Snsc -Dimensions: 400/400/H930 mm -Weight: 91 kg

Condition: used, Year of construction: 2013, CNC profile processing center by Stegherr, model GLS-2, year of manufacture approx. 2013, Beckhoff control system type CP3919, serial no. 143/0613-1. Free sale. Please send us your offer. Bev Stjx Natcek Snslc

Condition: like new (used), Year of construction: 2022, functionality: fully functional, TM-California-4: 4-Axis CNC Machining Center Type California/4-4 • CNC machining machine suitable for aluminium profiles • Automatic opening and closing of the safety cover • Spindle movement via linear guides and servo motor • Equipped with ISO 30 spindle • Power 7.5 kW and speed 24,000 rpm • Electrically rotatable spindle from 0° to 180° • Pneumatic profile stop on both left and right sides • 6 pneumatic profile clamps • The profile clamps are manually positioned as standard • Tool magazine on the right with 6 slots + disc cutter • Automatic tool changing • Automatic cutter length measuring system • Automatic cooling mist with micro-dosing system • Industrial PC and remote service system • 21.5" PC with Windows 10 operating system • Includes Uni-Link CADCAM software with Uni-Link On Board Bsv Stox Hd Hzok Snjlc • User-friendly interface for operation and visualisation • Machining length: 4,200 mm • Machinable profile cross-section: 230 x 230 mm • Accuracy: 0.1 mm/m

Year of construction: 2019, condition: excellent (used), functionality: fully functional, machine/vehicle number: G123379, Machining center, fully functional, well-maintained, ready for immediate collection. Blsv Seygh Etotk Snoc