Used broaching & slotting & drawing machines for sale (169)

Condition: good (used), overall weight: 10,364 kg, Year of construction: 2019, 2019 GENERAL BROACH 10-30 GBTU VERTICAL TABLE UP BROACH Equipped with: Retriever Shuttle Table Chip Conveyor Auto Load Grayco Lube AB Panelview Coolant Tank & Pump Specifications: Capacity: 10 Ton Stroke: 30" Table Up 1″ Puller / Retriever Bsv Sjrtrzaotk Snolc Hydraulic Power Unit Chip Conveyor Machine Dimensions (approx.): 165″ x 48″ x 60″ Machine Weight Total (approx.): 22,800 lbs. Machine Column (approx.) : 13,000 lbs. Base w/ Chip Conveyor (approx.): 4,700 lbs. Electrical Panel (approx.): 600 lbs. Hydraulic Power Unit (approx.): 4,500 lbs.

Year of construction: 1978, condition: good (used), U.S. MODEL 50TX120 VERTICAL PULL DOWN BROACH Equipped with: Retriever Puller Hydraulic System Coolant System Chiller Chip Conveyor Manuals Specifications: Normal Broaching Capacity: 100,000 Lbs at 922 PSI Peak Force Capacity: 133,600 Lbs at 1350 PSI Main Slide Stroke (Bump Inches): 106 Maximum Cutting Speed: 20 Ft/Min. Maximum Return Speed: 40 Ft/Min. Main Pump Motor: 75 HP at 900 RPM Hydraulic Reservoir: 365 Gallons Handling Pump Motor: 10 HP at 1200 RPM Coolant Pump Motor: 1.5 HP at 1800 RPM Coolant Pump Capacity: 100 Gallons / Min at 23 Head Ft. Coolant Reservoir Capacity: 600 Gallons Approx. Floor Space ( Width x Depth x Height): 65" x 96" x 243" Bjv Stsrtrzljk Snjlc Net Weight, Approximate: 79,000 #

Condition: good (used), functionality: fully functional, Year of construction: 1999, The system was completely overhauled in 2012! Max. component dimensions: approx. 700 x 300 x 250 mm (L x W x H) Max. weight per casting: 10 kg Control: CPU Siemens S7-300 Internal diameter of shock wave chamber: 970 mm Shock generator: 6 - 10 kJ Hydraulic installation: system pressure of small pump = 250 bar Including wastewater treatment system and soundproof cabin Bsv Stoyfggtsk Snelc

Condition: good (used), Year of construction: 1980, Info: Machine was embedded in a pit! - Tractive force: max. 25,000 kg - Clearing stroke: max. 630 mm - Clearing speed: 1 - 10 m/min - Return speed: 7 - 25 m/min - Total connection requirement: 45 kW Bov Stkeydlq Io Snslc - Machine weight: 5,500 kg

Condition: good (used), Year of construction: 2004, - Tractive force: max. 160 kN - Clearing stroke: max. 1000 mm - Truck feed stroke: max. 630 mm - Table top width: 630 mm - Broaching speed: 10 m/min - Return speed: 23 m/min - Installed power: max. 88 kW Bsv Steydlqzok Snslc - Machine weight: 12,410 kg

Condition: good (used), Cardinal Broach Blov Seq R T Hcotk Snjc Model TM7

Condition: used, Year of construction: 1959, pulling force - max. 10 t max. ram stroke 1300 mm voltage 380 V weight 1400 kg Broaching machine RAUSCH RS10/1300 Year of construction: 1959 Stroke: 1,800 mm Tractive force: 10 tonnes Blsv Stk Sjvh Nd Aonjc

Condition: excellent (used), Year of construction: 2007, pulling force - max. 9 t max. ram stroke 2000 mm max. workpiece diameter 900 mm Bsv Ssycxlcjtk Snjlc total power requirement 25 kW weight of the machine ca. 4,2 t

Condition: good (used), Year of construction: 1956, Slotting machine, slotting machine, quick planer, keyseating machine, slotting machine, slotting machine, slotting tool, broaching machine, slotting machine, horizontal slotting machine, planing machine, schepping -Manufacturer: Elliott, horizontal shaping machine type 24M SHAPER -Stroke: 610mm -Stroke rate: 8 - 74 1/min -Clamping table: 580 x 330 mm -Travel: X/Y/Z 375/755/292 mm -T-Slot: 20mm -Drive: 3.7 kW -Dimensions: 2080/1120/H1550 mm Blev Steh Nvy Ejk Snsc -Weight: 1520 kg

Condition: excellent (used), For sale: Professional dot peen marking machine PRO PEN P5000 (GravoTech Marking SAS), distributed by HAHN+KOLB Gruppe. This is a fully industrial-grade device designed for permanent marking of metal and plastic parts—serial numbers, logos, codes, and production markings. Specifications: • Model: Propen P5000 Pn/d • Year of manufacture: 2010 • Power supply: 100–240 V, 50/60 Hz • Power: 150 W • Operating pressure: 5.5 bar (pneumatic supply) • Manufacturer: GravoTech Marking SAS, France • Operator panel with touchscreen + HP keyboard • Robust worktable with guides. The machine is complete, fully functional, and ready for operation. Ideal for workshops, production plants, tool rooms, and wherever quick and precise permanent marking is required. Very good condition—well-maintained unit with minimal signs of use. Bsvow R Spqs Stk Snolc

Condition: good (used), max. ram stroke 400 mm throat 900 mm table diameter 1000 mm ram adjustment 1000 mm ram swivable +/- 12° longitudinal adjustment 950 mm Bljvoya Iils Stk Snec cross adjustment 750 no. of strokes 11 - 60 Hub/min table diameter 1000 mm table load 4 t total power requirement 12 kW weight of the machine ca. 8,2 t dimensions of the machine ca. 3,4 x 2,2 x 3,1 m

Condition: good (used), functionality: fully functional, Year of construction: 1962, overall weight: 1,000 kg, input voltage: 400 V, input frequency: 50 Hz, broaching length: 250 mm, Stuhlmann 250S keyseating machine, year of manufacture 1962. Keyway widths: 4mm to 32mm. Stroke height: 250mm. Comes with various holders and broaching tools. In good condition and works flawlessly. Originally from a sugar factory and only lightly used both there and by us. The machine can be inspected and demonstrated under power. The electrics were completely overhauled in 2022. The table can be tilted for machining tapered keyways. Bsv Steygg Sfsk Snslc

Condition: used, Year of construction: 1964, serial number 23046 Bsv Stksfgpdrs Snolc stroke 320 mm +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 1985, 32 mm 12 mm stroke 330 mm pulling capacity 3,0 t total power requirement 1,2 kW weight of the machine ca. 0,65 t dimensions of the machine ca. 1,2 x 0,8 x 1,2 m Keyway broaching and slotting machine with accessories as shown. Good condition. Blsv Stkjwkvths Snec

Condition: new, weight max. in kg 5000 kg connected load frequency 230 V Blovjupxr Is Stk Snec weight 12 kg dimensions 700 x 300 x 300 mm Due to the low installation height, the maximum lifting height remains available. Control with emergency stop. (required by law) Suspension with safety hook. Overload protection with slip clutch. Built-in limit switch. Collection bag for chain. Control console with 1.6 m cable.

Condition: used, Year of construction: 1989, stroke 600 mm hydraulic ja keins dabei weight 3,7 t Bljv Stow Sykfek Snoc

Condition: good (used), Year of construction: 1980, machine/vehicle number: 20007, Offer 23326 Technical specifications: - Broaching tool width up to 10 mm - Broaching tool length up to 1000 mm - Pulling force: 1.5 t - Working speed: 4 m/min Blevjyfgc Is Stk Snoc - Working / operating height: 1000 mm - Drive: 400 V / 1.5 kW - Required space: approx. W 1500 x H 1000 x D 400 mm - Weight: approx. 200 kg

Condition: used, Multi-wedge broach, hexagonal broaching tool, broaching tool, broach, special tool, grooving tool, grooving machine, slotting machine, slotting machine, slotting tool, slotting broach Blov Seitt R Sotk Snsc -Manufacturer: SWZ, broach, impact broach -Type: SW 19 1TGL 29-16600/02 20/50 HSS -Item no.: 440 0432 08 102 04708 -Width: Hexagonal 19 mm wrench width, see photos -Quantity: 1 piece available -Total dimensions: 950/22/22 mm -Weight: 1.7kg

Condition: used, Broaching tool, broaching needle, special tool, grooving tool, keyseating machine, keyway broaching machine, keyway broaching machine, keyway broaching tool, broaching needle -Manufacturer: Planeta Coswig, broach push broach -Type: 16D11x2.7 34-120inSt 34-165inGG Bljv Steitt Saek Snec - Width: 16mm -Number: 1x available -Total dimensions: 1250/16/H30 mm -Weight: 4.2kg

Condition: excellent (used), Broaching tool, broaching needle, special tool, grooving tool, keyseating machine, keyway broaching machine, keyway broaching machine, keyway broaching tool, broaching needle -Manufacturer: SWZ, broach push broach -Type: B 6 J9x1.8 RL 24-72mm -Item no.: 45 0014 -Width: 6mm -Number: 2x broach available -Price per piece -Total dimensions: 900/6/H13 mm -Weight: 0.5 kg/pc. Bsv Stksitt Rys Snolc

Condition: used, Broaching tool, broaching needle, special tool, grooving tool, keyway machine, keyway machine, keyway tool, keyway broaching needle -Manufacturer: SWZ, broaching needle -Type: SW 22 F8x28,35 RL 20-50 mm -Article No.: 24 3039 174 208 020 TKC -Width: Square 22 mm Blov Stk Soitt R Ijnoc -Quantity: 3 pieces available -Price per piece -Total dimensions: Ø 22 x 925 mm -Weight: 2.1 kg/piece

Condition: used, Square broaching tool, multi-wedge broaching needle, broaching tool, broaching needle, special tool, grooving tool, keyway machine, keyway machine, keyway tool, keyway broaching needle -Manufacturer: SWZ, broaching needle -Width: Square 17 mm wrench size, see photos Bsv Sekkzymstk Snjlc -Type: unfortunately no longer readable -Size: see photos -Quantity: 1 piece available -Total dimensions: Ø 19 x 955 mm -Weight: 1.3kg

Condition: ready for operation (used), Year of construction: 2007, Immediately available ex-location: Hydraulic Horizontal Broaching Machine Hahndorf Model HRH 1200/4 Year of manufacture: 2007 Pulling force: 4 t Broach length: 1200 mm Maximum keyway width up to 22 mm Broaching speed: 0 – 6.5 m/min Rapid return: 10 m/min Automatic tool clamping Bjv Stk Soyax U Sjnslc Drive: 5.5 kW Mounting plate: 350 x 350 mm Numerous holders and broaching tools included Weight: 750 kg Price: EUR 4,750 plus VAT, ex-site

Year of construction: 1948, condition: used, Technical details: Bljv Stou Ng Tbsk Snec max. ram stroke: 450 mm table diameter: 800 mm min. ram stroke: 65 mm workpiece height max.: 600 mm ram adjustment: 600 mm no. of ram strokes: 18; 22; 28; 35; 45; 56 Hub/min. cross feed of the table: 800 mm longitudinal feed of the table: 1000 mm table rotation: 360 ° feed: Tisch: pro Hub: 0,14 - 0,22 - 0,35 - 0,56 - 0,9 -1,4 mm/Hub total power requirement: 7,8 kW weight of the machine ca.: 6,25 t dimension machine xH: 2,8 x 1,9 x 3,0 m other features: Ram: -the ram is adjustable in the projection of 900mm -throat of bed = 700mm Tool clamp by means of bracket clamp (dimensions 350 x 250mm) Accessories: 1piece 3-jaw chuck Ø 250mm *

Condition: used, Year of construction: 1954, Technical details: Bljv Sjv Ty R Detk Snsc max. ram stroke: 220 mm workpiece diameter - max.: 400-450 mm total power requirement: 1,5 kW work table:: 650x250 mm ram adjustment: 100 Manuell mm no. of ram strokes: 45/78/125 table adjustment: 400 längs mm table adjustment: 150-170 quer mm table adjustment: ca. 360 vertikal mm tool - head swivelling: +/- 10 Grad total power requirement: 1,5 kW weight of the machine ca.: 0,9 t dimension machine xH: 1,2 x 0,9 x 1,8 m