Condition: ready for operation (used), functionality: fully functional, control voltage: 380 V, input frequency: 50 Hz, Inclined vibrating screen model SACMI/MAS useful for separating and classifying materials based on their size. This type of equipment is designed to optimize the screening process, thanks to its inclination that favors the passage of materials through meshes with different openings. Bjv Ssv Egwzstk Snslc

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 10022523, Equipment: documentation/manual, Hydraulic press for ceramics model SACMI PH1500, year 2007, column light 1600mm, complete with all its standard accessories and included: electrical panel, control panel, hydraulic power unit, set of power cables and pipes, traditional lifting. Fully functional machine Blov Stksv D Hbdo Snec

Condition: used, • A-frames for jumbo dimensions • 5 feet form one frame - 30 feet available = 6 frames • Cross tubes included • Glass support area: 2 x 280 mm Bsv Stk Ssyf En Asnolc • Price: €300 / unit

Condition: used, • Bar cart Bljv Seyf Efnotk Snjc • Length = 1600 mm • Width = 1200 mm • Height = 2600 mm • 50 compartments • 20 units available

Condition: used, • Can rotate and tilt • Automatic suction system • Equipped with air cylinder Blev Stjyf Ecmjk Snoc • 8 suction pads • 4 adjustable • Load capacity – 150 kg • Weight – 170 kg

Condition: used, Manual sealer Reinhardt Blsv Stoyf Eb Nsk Snsc

Condition: used, • Glass transport rack for double-sided loading • Length: 3,390 mm • Width: 1,100 mm • Loading height: 2,000 mm / possibility of overloading upward • Total height: 2,240 mm / incl. crane rings • Support depth per side: 400 mm / 390 mm usable • Load capacity: 2,000 kg Bovoyf Eafo Stk Snslc 45 units • Price on request

Condition: used, Year of construction: 2011, BOTTERO 535 AVM-37 – Year 2011 Laminated Glass Cutting Table Low-E Max Cut: 3700 mm Thickness: Float: 3-8 mm Laminated: (2+2) (8+8) mm Bev Sex Hwaujtk Snolc Power: 23 kW

Condition: used, Year of construction: 2011, functionality: fully functional, BOTTERO CUTTING LINE BOTTERO 507/CBM – Year 1997 Bov Stkeygh Uzs Snjlc Double-sided loader 6 positions per side Maximum dimensions: 3650 x 2750 mm Thickness: 2–19 mm + BOTTERO 340 BCS-J EVO – Year 2011 Jumbo Max glass size: 6100 x 3300 mm Thickness: 3–25 mm Speed: 140 m/min Precision: ±0.15 mm Power: 16 kW + BOTTERO 100 BBM-J – Year 2011 Loading table Max dimensions: 6100 x 3300 mm Overall dimensions: 7000 x 3660 mm Thickness: 2–19 mm

Condition: used, • With automatic loader with 1 storage position on the right • The L-frame on the right is also part of the system • Automatic cutting table that can also cut shapes • Conveyor belt • Year of manufacture (as per nameplate): 2002 • Serial No.: 5000226 • Type: TFE 65-S • Breaking table • With breaking bars for longitudinal and cross breaking Blov Stk Seyc Uumjnjc • Cutting table and breaking table with powerful air cushions • Weight of the entire system approx. 12,000 kg Price negotiable: €15,000

Condition: used, Year of construction: 2004, functionality: fully functional, BOTTERO 530 AVM – Year 2004 Automatic cutting table for laminated glass with thermal separation Max cut: 4,600 mm Thickness: 3+3 to 10+10 mm Precision: ±0.3 mm Pneumatic pressure: 6/8 bar Blov Stk Soyf Id Honoc Power supply: 400 V / 50 Hz / three-phase

Condition: used, Year of construction: 2022, Second-hand INTERMAC automatic shape glass cutting table (regular), for maxi glass sheets 3710 x 2750 mm, Type Genius 37 RSA, year 2022 Bov Stkeygk Udo Snjlc

Condition: like new (used), Year of construction: 2015, functionality: fully functional, Hegla + 1 x Easycut 3326C + LKAT 2222 Low grinding table S-CUT-1400 Blovsvyzchj Stk Snec combi or split sale + with Low grinder table + with tilting loading arm Manual cutting system for cutting float and ornamental glass.

Condition: used, Bottero Variant 815BCS variable angel 0-45° Bljv Stk Sewinrtensc CY 2004 Total overhaul 2022 Variant is the range of Bottero variable angle Straight Line Edgers. The 8 models available within this range of machines allow working the flat edge of an angle varying up to 45° and removing the arris. Bottero’s vertical edge grinding and bevelling machines allow the highest quality results to be achieved when processing edges, thereby guaranteeing a perfect finish and allowing use in the most elegant applications, in which quality is considered an essential element. The vertical edgers and bevelling machines are designed to ensure maximum production and maximum reliability. The availability of numerous machine set-up configurations allows you to choose the right product for both simple and extremely advanced processing operations.

Year of construction: 2019, condition: excellent (used), functionality: fully functional, perfect condition WH 800 HD - 3 - 400 - 3 - Schn Bljv Sjvz Tcvetk Snoc 800 mm min 100 x 400mm 2-10 mm max 3m/min 45 kW 6260 x 1280 x 1750 mm body power cabinet 1000 x 480 mm S-WSH-531

Condition: like new (used), Year of construction: 2020, functionality: fully functional, Dual Chamber During Oven 1.700 x 1.400mm (2.40m2) Process area based on largest substrate; 4.1. Process area (minimal); 1.700 x 1.400mm (2.40m2) 4.2. Substrates are (non-) heat treated, (non-) TCO coated optical white (or standard) float glass sheets with straight or pencil edges and (non-) edge delete patterns (1) 4.3. Substrates are rectangular shaped (2) Bev Stjv T I Iqok Snslc General Electrical diagram (see appendix 1) Main power supply voltage 3x400 ± 5% + earth, 50Hz ± 5% Control voltage 230Vac 50Hz and 24Vdc Main fuse 140A Motor power Circulation fan motor 2.2 kW (2 pcs.) Drive motor vertical transport 0.39 kW Drive motor horizontal transport 0.09kW 1.5.3 Heating system Heating Heating type Electric with closed tube elements Power 30 kW per room Overall, the system consists of two parts, viz: - The furnace consists of two chambers each with an air circulation fan and adjustable air inlet. - The conveying system consists of a trolley with vertical and horizontal movement. The oven is suitable for curing heat treatments under air atmosphere with cleanroom classification in the temperature range from 50ºC to 250ºC. One heat cycle per chamber can be programmed. The cart can place glass from the conveyer position into one of the two chambers where the products undergo a selected heat cycle. And then removed from the oven and placed back in the conveyer position.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, input voltage: 400 V, input current: 5 A, input frequency: 50 Hz, type of input current: three-phase, power: 3.5 kW (4.76 HP), Z. Bavelloni VT1250SA + L automatic horizontal drilling machine with 2 drilling heads (upper and lower). The machine is in very good working condition, equipped with a laser for drilling hole positioning and an inverter for spindle speed adjustment. It will be delivered with a set of diamond drilling tools. The machine has a water tank and water pump. Bljv Stksyghh Us Snoc

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, total length: 7,800 mm, Bavelloni Straight Line Edger Model: VE500 11 11 Spindle Excellent condition Blsv Stk Soydc I Denjc Delivery and Installation available

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, total length: 7,545 mm, Bottero Straight Line Edger Year - 2022 Blov Stksydcfio Snoc Model - Vitralux 110FX Glass thickness: 3mm - 50mm Processing angle: 0-45 degrees Feed: 0.6 - 6m/Min 10 spindle Cerium oxide wheel, in last position, for excellent finish Excellent condition Delivery and Installation available.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, total length: 6,490 mm, total width: 3,220 mm, Bottero CNC Year - 2022 Model - Pratica Plus 3300 Automatic tool changer Complete with all tooling and spares Blev Stk Soydbigjnsc Excellent condition as it has done minimal work Delivery and Installation available.

Condition: good (used), Year of construction: 2016, functionality: fully functional, total width: 7,700 mm, total length: 19,300 mm, Year - 2016 Model - 630 CBM and 353BCS-R Bljv Stksyc Uq Io Snsc 4 station double loader Cutting , grinding, marking and breakout. Tilt function Shape scanner Perimeter fencing for loader Delivery and Installation available.

Condition: ready for operation (used), An old Knopp glass grinding machine for edge processing is available. Grinding belt dimensions X/Y: 1830mm/100mm, glass types: float glass/mirror glass/furniture glass/table tops, grinding wheel diameter: 200mm, table dimensions X/Y: 900mm/1400mm, machine dimensions X/Y/Z: approx. 1300mm/1500mm/1700mm, weight: approx. 500kg. On site inspection is possible. Blsv Stk Seygw Spenoc

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, bending furnace with molds for sink Bjv Stkox Dtwhj Snslc 380 V 50 HZ KW 60 Usefull size = 2500 x 1200 mm / 98”x47”

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Gemy 6 is the straight edging machine with 6-cup wheels, with innovative design and technology. It executes high quality work on thickness up to 35 mm and is equipped with a NC that, amongst various functions, also automatically adjusts the speed of the machine according to the thickness to be processed. Thanks to the use of ABS covers it proves exceptionally soundproof and safe due to the complete acoustic and electrical insulation. . Ergonomic and easy to use Multifunctional NC Central lubrication ABS covers Possible regulation of the amount of glass to be removed (0÷5 mm with a 0,25 mm step) Front regulation of the wheel that executes the back arrise Stainless steel casing and tanks Bjv Stswinq Aek Snjlc Technical data: Workable glass thickness: 3 ÷ 35 mm Min. workable dimensions: with corner chamfering (15 mm) 45 mm Without corner chamfering 35 mm Max weight allowed per meter of conveyance: 200 kg/m and total load 350 kg Working speed 0,5 ÷ 5 m/min Pneumatic feed: pressure 6 bar Water tank: 1 x 360 liters Total power installed: Kw 16.5 Total length (L) 6700 mm Machine width (W) 1300 mm Total height (H) 2300 mm Height of working plane ≈ 840 mm Total weight (with empty water tank): 2600 kg Numerical control RS150 Operator interface CN 23 Programmable control (PLC) Integrated in the NC Screen Liquid Crystal Display (LCD) Operative keyboard Sensitive keys

Condition: used, Year of construction: 2009, functionality: fully functional, aluminium spacer cutting saw Bsv Stjx Dxrkek Snelc