Used extruders & extrusion lines for sale (223)

Year of construction: 2002, operating hours: 1,378 h, condition: good (used), Brand: Berstorff Type: ZE 25 compounding line Serial no.: 90200771-0010/2002 Year of manufacturing: 2002 Operating hours: 1,378 Screw diameter: 25 mm Screw L/D: 44 Dimensions (LxWxH): 4,500 x 1,200 x 2,200 mm Weight: 1,350 kg Line configuration: – 1x gravimetric powder feeding system from Brabender – 1x vent port for degassing, including vacuum pump – Filament die with 6 cavities – Cooling roll with tempering unit – Pelletizer with adjustable speed – Central control cabinet Other: All documentation available in German Bsv Stk Soyf Itnonelc The machine was originally used for biomaterials

Year of construction: 2001, condition: excellent (used), functionality: fully functional, machine/vehicle number: 3063, used Leistritz Micro27/GL-32D laboratory twin-screw extruder, machine no. 3063 Year of manufacture: 2001 Motor power: 10.5 kW Screw speed up to 500 rpm Screw diameter: 27 mm Cylinder material: 1.8550 nitrided Nitriding layer 0.5-0.6 mm Screw material: 1.2379 Bsveyc Sfpj Stk Snolc Volumetric dosing Brabender mounted on the gearbox and included in the scope of delivery. Single temperature control unit included in the scope of delivery. Atmospheric degassing, without blind plug Documentation in German available in paper form. tool with nozzle 1 hole approx. 3 mm Condition: used, functionally tested, as is, without warranty

Year of construction: 1987, condition: good (used), Brand: Collin Pilot & Lab Solutions Model: P300 Presse Blsv Ssycggbjtk Snsc Year of construction: 1987 Plate dimensions: 296 x 296 mm Machine no.: 6300 22 86 Connected load: 18 kW Dimensions (LxWxH): 1,150 x 530 x 1,750 mm Weight: 650 kg

Condition: good (used), WEBER tube extrusion line including: WEBER DS 8.5 Elmepla saw Battenfeld R200/6 Blsv Stovryhyek Snsc Battenfeld V125

Year of construction: 1993, condition: excellent (used), functionality: fully functional, Werner & Pfleiderer Twin-Screw Extruder ZSK 40 – Excellent Condition For sale is a Werner & Pfleiderer (WP) ZSK 40 co-rotating twin-screw extruder. Technical Specifications: • Machine Type: ZSK 40 • Screw Diameter: 40 mm • Screw Length: 7 barrels × 4 D → approx. 28 L/D • Main Drive: 34.5 kW • Motor Speed: 1,800 rpm • Screw Speed: 40 – 400 rpm • Max. Torque per Screw Shaft: 325 Nm • Heating: Electric, connected load approx. 17 kW • Cooling: Water chiller unit • Temperature Control Zones: 6 zones • Barrel Temperature Sensors: 6 • Material Temperature Sensor: 1 • Material Pressure Sensor: 1 Barrel Configuration: • Feed barrel with liquid injection port • Open barrel with insert and 2 liquid injection ports • Multiple closed barrels with ports for liquid injection or measurement points • Degassing barrel General Features: • Co-rotating, closely intermeshing (self-cleaning) screws • High mixing and dispersing performance thanks to modular mixing and kneading elements • Modular system for screws and barrels • Drive section and process section mounted on stable base frame Fields of Application: • Plastics compounding • Masterbatch • Additive and filler incorporation • Laboratory and pilot plant use Bljv Seycuuyotk Snec • Formulation and product development Condition & Runtime: According to the operating hour counter, the machine has run for less than one year and is therefore in excellent, nearly as-new condition. The screw elements are also as new. Options & Customizations: Upon request, we can design and install suitable tooling, such as strand dies, and integrate additional peripherals such as screen changers, pelletizing units, dosing technology, or other customer-specific components. The machine can thus be configured and delivered ready-for-operation according to customer requirements.

Condition: ready for operation (used), Year of construction: 1998, screw diameter: 85 mm, Complete extrusion line. Individual components can also be offered on request. The line has been used for making tubes from PP filled with chalk and barium sulfate. Components: - 4 Components Colortronic dosing (new controller in 2017) - Berstorff KMC 85/2 (screws renewed in 2019) - Sidefeeder - Complete control of dosing and extruder Bov Sou Rda Ietk Snelc - Single oil tempering - Stomach melting pump - Krausmaffei Extrusion head 40 to 160 mm (with various sets) - Vacuum tank Battenfeld V250VA - Spray bath K250 VA Battenfeld - Pulling mechanism C250 - 4 Sica - Saw CCM 32/170-2 Roller pole - Tilting table Battenfeld

Condition: good (used), Year of construction: 1995, operating hours: 60,269 h, Brand: Cincinnati Milacron Model: CMS 60-25 BL Serial No.: 2008877/10 Screw Type: Single screw Year of manufacture: 1995 Operating hours: 60,269 hours Screw diameter: 60 mm L/D ratio: 25 L/D Motor power: 28 kW Bljvsyaa S Ss Stk Snoc

Condition: excellent (used), Year of construction: 1999, BATTENFELD PE/PP PIPE HEAD PO 250 / 600 SI Type: PO 250/600 SI. Screen basket Year of manufacture: 1999 Little used Condition: Very good, needs cleaning With co-extruder Extrudex EN 25, year of manufacture 1999 For color strips The system is my property Blsvsvy It Ts Stk Snjc Location: Sachal Extrusionsmaschinen Bahnhofstr 6 D-26345 Bockhorn-Grabstede

Year of construction: 1994, condition: used, weight 2,2 t extruder diameter x mm x +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. Bjv Sox U A Iaetk Snolc +++++

Condition: like new (used), High-Quality Meltblown Production Line for Nonwovens A complete machine inspection was carried out by the manufacturer's service team on 17.12.2025. Inspection report available. Commissioning at the customer's site can be offered upon request. Operating hours: 80 hours (commissioning only) Price for a new machine: EUR 7,500,000 Blev Stk Sex Hx Rnenjc • Manufacturer: Reifenhäuser GmbH & Co. KG Maschinenfabrik • Model: Reicofil MB 1600 • Year of manufacture: 2021 • Last commissioning: 2022 Technical specifications: • Working width: 1,600 mm • Material: Polypropylene (PP), MFI 230 / 2.16 > 400 g/10 min • Output: Up to 65 kg/h per meter width • Product weight: 10–80 g/m² • Production speed: 5–80 m/min • Die head: MB 1600, 50 h/in • Extruder: RT-1101-1-100, L/D 30 • Heating capacity, rotary beam: 65–172 kW • Winder: contact winder with preset reel change • Max. winding diameter: 1,250 mm • Web width: 1,700 mm • Winding tension: 10–100 N/m Additional equipment and accessories: • 3-component dosing system • 80 mm automatic seat changer • Ultrasonic cleaning system • Pyrolysis unit • Ozone extraction • Cutting knives • Central control panel with touchscreen and data entry

Year of construction: 1998, condition: good (used), Part of an old direct extrusion line for pipes (which is also still available). This machine is supplied with the following components: Bljv Sjx S Rimotk Snec - 4-component Colortronic dosing system (new control installed in 2017) - Berstorff KMC 85/2 (screws renewed in 2019) - Sidefeeder - Complete control system for dosing and extruder - Single-circuit oil tempering - Maag melt pump

Year of construction: 2016, condition: excellent (used), functionality: fully functional, Make: Reifenhauser Model: Mirex-MT-V 1-RZE 120-1800 Year: 2016 Condition: Excellent Use: PET / PP / PS Foil or Sheet PET: Thickness Range: 0.25 - 2.2mm Output: 2,000 kg/h Max Sheet Width: 1600mm Extruder: RZE 120mm Electrical Supply: 3 x 480V 60Hz with N Blsvsvbcbus Stk Snsc Calendar Roll Width: 1800mm Calendar Roll Diameters: 450 / 700 / 700mm Silicon Bath Max Sheet Width: 1600mm Silicon Bath Sheet Thickness Range: 0.15 - 1.5mm 4 Position Winder WOB 1800 for double web winding included. All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale.

Year of construction: 2001, condition: excellent (used), functionality: fully functional, Manufacturer Reifenhauser Bov Stkewzkmwo Snslc Model PP Extrusion Line Year 2001 Condition Very Good Stock Number 00027 Materials PP Max PP Material Thickness 300 - 2000 μ Max Sheet Width 1050 mm Max Output 600 kg/h at 0.8-1.2mm sheet Max Roll Diameter 800 mm Power Supply 380V 60Hz All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale.

Year of construction: 2004, condition: excellent (used), GRAEWE - SANDERN UNDERWATER VACUUM CALIBRATION TANK Bov Sjyc E Nnstk Snolc V-32-2-3, 3 meters long 2-chamber tank with 2 bypass filters Year of manufacture 2004 Without spraying / Full immersion calibration tank Electric feed, forward and reverse

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 3.04-00054, Equipment: type plate available, Used Bellaform extruder Type: BH45-30D Year of manufacture: 2013 With screw dimensions 45 mm - 30 l/d, screw speed approx. 160 rpm With 30 kW water-cooled servo motor, with gearbox Cylinder with 4 heating/cooling zones and water bushing in the feed area Material hopper plus a COLORTRONIC dosing screw for masterbatch A melt pressure sensor Blev Stk Sjuxa Abonec Control cabinet integrated into the machine frame, with factory-new PLC and With new touch panel for simple and intuitive operation This extruder has been functionally tested! Dimensions: approx. 195 x 70 x 200 cm (L x W x H with hopper)

Year of construction: 1990, condition: excellent (used), functionality: fully functional, Used Reifenhäuser extruder Type: RH 801-1-90-30 Blov Stew Np S Tjk Snoc with one screw D = 90 mm - 30 L/D equipped with ceramic heaters and cooling air fans DC motor, power 103 kW Year of manufacture: 12/1990 Known plasticizing capacity: 250 kg with PP granulate The plasticizing capacity depends on the material and shape Fully functional

Year of construction: 2026, condition: new, We have designed our compact extruder model EX30-28d so that it can be used in all extrusion processes. We offer this extruder as co-extruder or laboratory extruder, as well as for the extrusion of welding wire, filament, solid rods, hoses, or for pelletizing with hot die or strand pelletizer. We also realize other machine dimensions, please contact us. Bev Stk Seby Rfpenslc Our standard extruder with nitrided screw and barrel covers most polymer raw materials. Optionally, we also offer this extruder with wear-resistant screw and barrel, for example: for PEEK, titanium, ceramics, etc.

Year of construction: 2026, condition: new, Extruder 30 mm - 28 l/d with die for weldingwire extrusion or profilextrusion with cooling bath with adhesive water blow-off Bev Sji Tu U Ustk Snelc with haul-off with winder and guiding device

Year of construction: 2026, condition: new, functionality: fully functional, The laboratory extruder model EX20-25d is designed for small-scale material development, small batches, or filament extrusion. It has a plasticising capacity of 5kg/h. Bsv Stk Seiv H Ekenjlc Our extruder model is designed with a bimetallic barrel and through-hardened screw, allowing for high-temperature processing (up to 400 degrees). This enables the processing of abrasive raw materials, engineering plastics, PEEK, metal compounds, ceramics, and fibre-reinforced materials. Inspect available machines at our factory in Königswinter. We can also provide machines in other dimensions.

Year of construction: 2007, condition: ready for operation (used), functionality: fully functional, REIFENHÄUSER​ TWIN SCREWS EXTRUDER, for PP / PE / PET Direct Recycling Type: RZE 2-85-41: D, Corotating Unidirectional Machine No .: Year of construction 2007 With​ gear pump,​ dosing station​ with 5 components +​ working platform and​ 2 K-Tron, 2 screws feeder Application:​ for Recycling, Compound or Pinpe Production Screw speed: 280 U / p min 10 digital cylinder heaters with cooling Screws: segmental Screws Cylinder: Segment construction Bjv Stkoxzr H No Snjlc Heating power: 104 KW Drive Baumüller: 260 KW Throughput: approx. 900 kg / h Condition: very good Vacuum pump is not included​ Price EXW 35.000,00 Euro Best Regards P. Sachal Location: D-26345 Bockhorn / Grabstede Sachal Extrusionsmaschinen Tel. =WhatsApp P. Sachal Sachal Extrusionsmaschinen

Year of construction: 2007, condition: ready for operation (used), functionality: fully functional, REIFENHÄUSER REITRUDER RZE 85 41:D Year of manufacture: 2007 Drive/Motor: 265 kW Screw diameter: 85 mm Output approx. 1,000 kg/h Includes gear pump, dosing station, and working platform Last application: The system was used for producing PP pipes up to a diameter of 630 mm. The Reitruder technology operates with co-rotating screws. We have adapted this twin-screw technology for use in direct extrusion lines—primarily for inline compounding. This integration combines several process steps into one. Sustainability Process 100% recycled material In combination with efficient vacuum units, the Reitruder technology enables you to process recycled PET bottle flakes directly—without the need for energy- and time-intensive pre-drying. Cost-effectiveness Reduce raw material costs by 30% Our Reitruder twin-screw technology processes high levels of additives and fillers. Instead of using pre-mixed compounds, fillers such as calcium carbonate or talc are continuously mixed in. Simultaneously, direct extrusion reduces energy costs compared to the conventional two-step compounding process. Without intermediate solidification and remelting of the plastic, the Reitruder processes materials from raw input to finished product in a single run. Direct Extrusion High quality without detours With direct extrusion, you can achieve quality levels for semi-finished and finished products that previously required considerable technical effort. Utilize today’s technology to combine various process stages into one single step. Reitruder RZE 85 EXTRUSION Among other innovations, the co-rotating twin-screw extruder Reitruder RZE 58 was the highlight of Reifenhäuser’s presentation at the NPE trade fair. A differentiated concept with new design elements was introduced. The screw geometry has been adapted to meet changing requirements by incorporating deeper channel depths and a redesigned feed section. These modifications improve feeding when processing PET flakes or regrind and increase the capacity for adding fillers. This results in significant advantages when processing lower-quality raw materials. Furthermore, increased degassing efficiency enables processing of material with moisture levels up to 0.5%. As a result, pre-drying requirements are minimized. Applications • Compounds • Recycled polymers • Thermoforming films • Cast films • Blown films • Foam films and boards • Packaging tape Bljvoyczlfs Stk Snsc Price: €35,000.00 LOCATION: SACHAL EXTRUSIONSMASCHINEN D-26345 Bockhorn-Grabstede Phone = WhatsApp

Year of construction: 2020, condition: excellent (used), LICHTER LRK 400 PVC PIPE HEAD FOAM CORE PIPE HEAD-THREE LAYER Application: PVC FOAM CORE PIPES KG-U PVC pipes Accessories: Tools for the production of pipes in diameters 250 mm, 315 mm and 400 mm The pipe head was in operation for about 1 year, due to business closure. Condition not new but in very good condition Bev Sewqgitstk Snjlc Location: Sachal EXTRUSION MACHINES D-26345 Bockhorn-Grabstede, Bahnhofstraße 6 Germany

Year of construction: 2008, operating hours: 75,559 h, condition: ready for operation (used), Main Drive Spindle motor power 200.2 kW Blev Stex D Rgyek Snec Injection Unit Screw diameter 75 mm Additional Equipment Connection to Measuring System: Connection for connection to INDEX wall thickness measurement Equipment for tool zones: EURO socket CEE 32 A - 6 H / 250 V, 3-pole blue Central main power supply Main Drive Spindle motor power 200.2 kW Injection Unit Screw diameter 75 mm Additional Equipment Connection to Measuring System: Connection for connection to INDEX wall thickness measurement Equipment for tool zones: EURO socket CEE 32 A - 6 H / 250 V, 3-pole blue Central main power supply This Krauss Maffei KME 75-36 R AC single screw extruder was manufactured in 2008. It features a KM-GM 750 control integration with meter weight and mass throughput control, and a capacity of up to 750 kg/h granulate. The machine includes a connection for INDEX wall thickness measurement and is equipped with a EURO socket CEE 32 A - 6 H / 250 V. Contact us for more information about this machine. Application Types Extrusion

Year of construction: 1983, condition: good (used), This WEBER extruder is in machine storage at Plastima Used Machinery. The machine is from 1983 and is in fine condition. Bsv Stkoq Tr Tbj Snslc - Brand: Hans Weber GmbH - Model: ZE 30 - Year built: 1983 - Single-screw extruder - Screw Ø: 30 mm - Ratio: 20 L/D

Year of construction: 1998, operating hours: 64,082 h, condition: good (used), This Cincinnati extruder is in machine storage at Plastima Used Machinery. The machine is from 1999. Special note: the extruder lacks the gearbox. – Brand: Cincinnati – Model: Titan 45R-APC – Construction year: 1998 – Conical double screw extruder – Screw Ø: 45 mm Blov Seq Tr T Retk Snec – Working hours: 64.082