Used cardboard packaging for sale (115)

Condition: used, Year of construction: 2009, Case packer from 1993 refurbished by the manufacturer in 2009. Automatic packing of boxes with cardboard group by rows and by stacking in a cardboard box with closure. Max. production: 20 to 30 cycles / minute Nordson Problue4 glue generator Label removal Delna DS 14 History, documentation and electrical diagrams available. Spare parts available. Blov Steygnaqsk Snoc Product length 50 - 130 mm Product width 47 - 200 mm Product height 15 - 40 mm Carton length 70-250 mm Carton width 70-250 mm Carton height 40-120 mm

Condition: used, Year of construction: 2020, Becker BZ-2 Atomic – Packaging System - 2 identical, mirror-inverted packaging lines available - Without cutting machine - Year of manufacture: 2020 In this system, the cardboard is first trimmed at the front to remove any potential transportation damage. After edge trimming, a side trim of at least 30 mm is performed on both sides. If necessary, corners are also cut from the cardboard, depending on the FEFCO type. Finally, the cardboard is creased along the fold lines and conveyed out of the machine. Waste generated during the process is transported out of the machine via a waste conveyor belt located underneath. At the machine’s discharge end, a conveyor belt removes the waste into a container. If the edge trim is too long, it must be cut inside the system to ensure trouble-free removal from the machine. The cut blanks and products are conveyed to the folding table where cartons are erected and filled. In the Box Closing Unit, the cartons are closed, labeled, and discharged from the system. Machine components (see diagram): (1) Buffer Table | (2) Conveyor Pack System | (3) Folding Table FT30 | (4) Box Closing Unit | (5) Label Applicator | (6) Belt Conveyor | (7) Buffer Table | (8) Conveyor Pack System | (9) Folding Table FT30 | (10) Box Closing Unit | (11) Label Applicator | (12) Belt Conveyor Technical Data: - Sound pressure level: < 70 dB(A) - Operating voltage: 400 V / 50 Hz - Rated current: 47 A Blev Steygipmjk Snec - Main fuse: 63 A - Connected load: 32.5 kW - Control voltage: 24 V - Compressed air supply: 6 bar - Air consumption: 10 l/min - Machine dimensions (W x H x D): 21,260 x 4,000 x 18,030 mm

Condition: new, Year of construction: 2025, machine/vehicle number: MH-FJ-1A, The VOGEL MH-FJ-1A carton sealing machine has a side drive belt system and an additional drive belt in the upper section of the machine. The advantage lies in the stability - high cartons cannot tip to the side. Carton formats: Bjv Stk Ssyaaqzjnjlc Length 150 - ∞ mm Width: 120 - 480 mm Height: 120 - 480 mm Technical data: Length 1,090 mm Width 1,050 mm Weight 200 kg Operating voltage 220 V CE marking Accessories: For our VOGEL carton sealer program we offer rollers, leading and trailing tables, roller conveyors.

Condition: new, Year of construction: 2025, machine/vehicle number: MH-FJ-1AW, The VOGEL MH-FJ-1AW carton sealing machine has a side drive belt system. Including leading and trailing table. Carton formats: Length 150 - ∞ mm Width: 100 - 480 mm Height: 120 - 480 mm Bleveyaaquj Stk Snsc Technical data: Length 1,090 mm Width 890 mm Weight 180 kg Operating voltage 220 V CE marking Accessories: For our VOGEL carton sealer program we offer rollers, leading and trailing tables, roller conveyors.

Condition: new, Year of construction: 2025, machine/vehicle number: MH-FJ-3A, The VOGEL MH-FJ-3A carton sealing machine is equipped with a lid sealing mechanism, i.e. the cartons can be fed in an open state. The short and long lid parts of the carton are closed first, only then is the carton glued. Carton formats: Length 150 - 600 mm Width: 115 - 490 mm Height: 110 - 510 mm Technical data: Length 1,800 mm Width 880 mm Weight 300 kg Operating voltage 220 V Air 5 kg/cm2 CE marking IMPORTANT: An air pressure supply is required to operate the machine, which is not included in the scope of delivery. Accessories: Bljv Steyaaqbjk Snec For our VOGEL carton sealer program we offer rollers, leading and trailing tables, roller conveyors.

Condition: new, Year of construction: 2025, machine/vehicle number: MH-FJ-1AWS, The VOGEL MH-FJ-1AWS carton sealing machine has a side drive belt system. The machine is specially designed for cartons in smaller formats. Carton formats: Length 160 - ∞ mm Bovoyaap Do Stk Snslc Width: 90 - 320 mm Height: 60 - 280 mm Technical data: Length 1,090 mm Width 890 mm Weight 85 kg Operating voltage 220 V CE marking Accessories: For our VOGEL carton sealer program we offer rollers, leading and trailing tables, roller conveyors.

Condition: new, Year of construction: 2025, machine/vehicle number: YS501X, Die Kartonverschließmaschine vom Typ VOGEL YS501X ECONOMIC ist unsere Empfehlung speziell für eher große Kartonformate, welche in Serien verklebt werden Karton-Formate: Länge 150 – ∞ mm Breite 150 – 500 mm Höhe: 140 – 560 mm Technische Daten: Betriebsspannung 220 V CE-Kennzeichnung Zubehör: Zu unserem VOGEL-Karton-Verschließer-Programm bieten wir Laufrollen, Vor- und Nachlauftische, Rollenbahnen an. Unser Kartonverschliesser YS501X ECONOMIC ist eine günstige Lösung, wenn es darum geht Kartons in eher großen Formaten sicher zu verschließen. Durch zwei seitliche Förderbänder werden Ihre Kartons sicher durch den Kartonverschliesser befördert. Die Einstellung der Kartonbreite erfolgt mechanisch über eine Kurbel. Die Höheneinstellung ist bei dieser Maschine besonders leicht und schnell zu lösen, denn das obere Klebeaggregat muss nur entriegelt werden und kann dann einfach auf die jeweilige Höhe gebracht werden. Auf Grund der mechanischen Einstellung der Formate ist diese Maschine für Serienproduktionen gedacht, bei welcher eine längere Zeit hintereinander Kartons im gleichen Format verschlossen werden sollen. Die Deckelklappen der Kartons werden vor dem Zuführen in die Maschine manuell niedergedrückt. Ausgelegt ist diese Maschine für Klebebänder mit 76mm Kerndurchmesser und 50 mm Breite. Wir empfehlen dazu den Bloveyaan Ts Stk Snoc Einsatz von Maschinenklebeband mit mehr Metern je Rolle ( als bei Handrollen), so können Sie länger arbeiten ohne das Klebeband wechseln zu müssen! Es können gleichermaßen PP & PVC Klebebänder, wie auch umweltfreundliche Papierklebebänder genutzt werden. Die Klebeaggregate können leicht heraus genommen werden, um die Kleberollen zu wechseln. Ebenso kann dies aber auch genutzt werden, wenn Sie Kartons vielleicht nur oben zukleben wollen ( Stichwort: Automatikbodenkartons). Selbstverständlich trägt auch diese Maschine das CE Zeichen.

Condition: new, Year of construction: 2025, machine/vehicle number: MH-FJ-2_, It features a side drive-belt system. The machine automatically adjusts to the respective carton size within the specified range. Carton formats: Length: 150 – ∞ mm Width: 140 – 480 mm Height: 120 – 480 mm Technical Data: Length: 1,150 mm Width: 1,005 mm Weight: 250 kg Operating voltage: 220 V Air: 5 kg/cm² CE marking IMPORTANT: An air supply is required to operate the machine and is not included in the scope of delivery. Bev Stk Sjyaam Nenelc Our MH-FJ-2 carton sealer is specifically designed for changing carton sizes. Thanks to pneumatic adjustment of height and width, constantly changing carton formats can be processed quickly and easily without manual intervention. The machine adapts to the different sizes instantly. Two lateral and two upper conveyor belts securely transport your cartons through the sealer. The carton flaps must be folded down manually before feeding the cartons into the machine. This model is designed for adhesive tape with a 76 mm core diameter and a width of 50 mm. We recommend using machine adhesive tape with a higher meterage per roll (compared to hand rolls), so you can work longer without needing to change the tape! Both PP and PVC tapes as well as environmentally-friendly paper tapes are suitable for use. The tape heads can be removed easily for changing the rolls. This also provides flexibility if, for example, you only want to seal the top of the cartons (keyword: automatic-bottom cartons). Of course, this machine also bears the CE mark. An on-site air connection is required to operate this machine! Accessories: Our VOGEL carton sealer range offers castors, infeed and outfeed tables, and roller conveyors as accessories.

Condition: new, Year of construction: 2025, machine/vehicle number: MH-FJ-1AWS, It features a side drive belt system. The machine is specifically designed for smaller-format cartons. Carton formats: Length 160 – ∞ mm Width 90 – 320 mm Height: 60 – 280 mm Technical specifications: Length 1,090 mm Width 890 mm Weight 85 kg Operating voltage 220 V CE marking Bsv Stk Ssyaamvjnslc Accessories: For our VOGEL carton sealer range, we offer castors, infeed and outfeed tables, and roller conveyors.

Condition: new, machine/vehicle number: CF 10 T / 1, Our CF 10T bottom flap folder with filling station is an inexpensive entry-level model. Cardboard boxes with a length of 200 to 600 mm and a width of 150 to 480 mm are fixed for filling and pneumatically transferred to the next station. This simple model comes with a magazine and runs on normal household electricity. The CF 10T requires compressed air for operation. Technical data: Dimensions 1400 x 950 x 700-860 mm Weight 90 kg Operating voltage 230 V / 600 W Compressed air 6 kgf/m3 Working height 700 - 800 mm Noise emission < 75 dB(A) Bov Stk Ssyaakzonslc Cardboard formats: Length 200 to 600 mm Width 150 to 480 mm Height 120 to 500 mm Roller conveyor is not included in the price, but can be purchased as an option. Can also be combined with one of our carton sealers on request.

Condition: new, Year of construction: 2025, machine/vehicle number: MH-FJ-3A, The VOGEL MH-FJ-3A carton sealing machine is equipped with a lid sealing mechanism, i.e. the cartons can be fed in an open state. The short and long lid parts of the carton are closed first, only then is the carton glued. Carton formats: Length 150 - 600 mm Width: 115 - 490 mm Height: 110 - 510 mm Technical data: Length 1,800 mm Width 880 mm Bev Stjyaaknjk Snolc Weight 300 kg Operating voltage 220 V Air 5 kg/cm2 CE marking IMPORTANT: An air pressure supply is required to operate the machine, which is not included in the scope of delivery. Accessories: For our VOGEL carton sealer program we offer rollers, leading and trailing tables, roller conveyors.

Condition: new, Year of construction: 2025, machine/vehicle number: MH-FJ-1A, It features a side drive belt system as well as an additional drive belt at the top of the machine. The advantage lies in stability – this prevents tall cartons from tipping over sideways. Carton formats: Length 150 – ∞ mm Width 120 – 480 mm Height: 120 – 480 mm Technical specifications: Length 1,090 mm Width 1,050 mm Weight 200 kg Operating voltage 220 V Blov Stk Sjyaahmenec CE marking Accessories: For our VOGEL carton sealer range, we offer castors, infeed and outfeed tables, as well as roller conveyors.

Condition: new, Year of construction: 2025, machine/vehicle number: YS501X-1, Die Kartonverschließmaschine vom Typ VOGEL YS501X ECONOMIC ist unsere Empfehlung speziell für eher große Kartonformate, welche in Serien verklebt werden Karton-Formate: Länge 150 – ∞ mm Breite 150 – 500 mm Höhe: 140 – 560 mm Technische Daten: Betriebsspannung 220 V CE-Kennzeichnung Zubehör: Zu unserem VOGEL-Karton-Verschließer-Programm bieten wir Laufrollen, Vor- und Nachlauftische, Rollenbahnen an. Unser Kartonverschliesser YS501X ECONOMIC ist eine günstige Lösung, wenn es darum geht Kartons in eher großen Formaten sicher zu verschließen. Durch zwei seitliche Förderbänder werden Ihre Kartons sicher durch den Kartonverschliesser befördert. Die Einstellung der Kartonbreite erfolgt mechanisch über eine Kurbel. Die Höheneinstellung ist bei dieser Maschine besonders leicht und schnell zu lösen, denn das obere Klebeaggregat muss nur entriegelt werden und kann dann einfach auf die jeweilige Höhe gebracht werden. Auf Grund der mechanischen Einstellung der Formate ist diese Maschine für Serienproduktionen gedacht, bei welcher eine längere Zeit hintereinander Kartons im gleichen Format verschlossen werden sollen. Die Deckelklappen der Kartons werden vor dem Zuführen in die Maschine manuell niedergedrückt. Ausgelegt ist diese Maschine für Klebebänder mit 76mm Kerndurchmesser und 50 mm Breite. Wir empfehlen dazu den Einsatz von Maschinenklebeband mit mehr Metern je Rolle ( als bei Handrollen), so können Sie länger arbeiten ohne das Klebeband wechseln zu müssen! Es können gleichermaßen PP & PVC Klebebänder, wie auch umweltfreundliche Papierklebebänder genutzt werden. Die Blev Stk Ssyaad Uonec Klebeaggregate können leicht heraus genommen werden, um die Kleberollen zu wechseln. Ebenso kann dies aber auch genutzt werden, wenn Sie Kartons vielleicht nur oben zukleben wollen ( Stichwort: Automatikbodenkartons). Selbstverständlich trägt auch diese Maschine das CE Zeichen.

Condition: new, Year of construction: 2025, machine/vehicle number: CF 10 T / 1, Our CF 10T bottom flap folder with filling station is an inexpensive entry-level model. Cardboard boxes with a length of 200 to 600 mm and a width of 150 to 480 mm are fixed for filling and pneumatically transferred to the next station. This simple model comes with a magazine and runs on normal household electricity. The CF 10T requires compressed air for operation. Technical data: Dimensions 1400 x 950 x 700-860 mm Bsv Stex U U Tnok Snjlc Weight 90 kg Operating voltage 230 V / 600 W Compressed air 6 kgf/m3 Working height 700 - 800 mm Noise emission < 75 dB(A) Cardboard formats: Length 200 to 600 mm Width 150 to 480 mm Height 120 to 500 mm Roller conveyor is not included in the price, but can be purchased as an option. Can also be combined with one of our carton sealers on request.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Factory closure mask production. Installed in 2021, out of operation since March 2022. The systems are already dismantled and ready for shipment. Optima CMF: Packaging machine Application: For erecting and sealing folding cartons, ideal for complex vertical carton requirements. Products: Suitable for cosmetic products such as lotion, makeup bottles, and cream jars. Blov Stk Sjxqf U Ssnec Features: Uses robotics for precise placement of products and inserts such as spatulas, brochures, or flip-top leaflets. Flexibility: Can also be configured for food and chemical products in other versions of the machine.

Condition: not inspected (used), 17 pieces Nordson 3500 Multiscan hotmelt glue units suitable for up to 4 hose connections. Acquired from a customer's stock. The units have not been checked by us and are being sold only as a lot, so all 17 at once. Sales condition: As is, where is. Bov Stk Sjyddynjnolc

Condition: used, Year of construction: 1990, Manufacturer : CERMEX Model : SL1 100 Type : Case packer Year: 1990 Automatic machine for grouping and boxing products Side boxing with tape sealing (adhesive tape) Number of formats available: 5 units (size available on request) Bjv Stkox R D A Do Snjlc Format change via settings + format parts Cardboard box dimensions: Length: 250 to 550 mm Width: 150 to 380 mm Height: 125 to 325 mm Product dimension : Length: 80 to 170 mm Thickness: 20 to 60 mm Width according to box length

Condition: used, Year of construction: 1988, Manufacturer : OLI Model: 210 Year : 1988 Type : Semi-automatic side loading case packer Application : To insert grouped cartons of regular shapes into shipping cartons Carton infeed and grouping : automatic Empty box loading: manual Bjv Stk Sjx R Dhgjnjlc Infeed conveyor Outfeed roller conveyor Factory voltage: 220 / 380 V Control voltage: 24 V Max. pressure: 6 bar   Current format: see illustration, adaptation can be quoted separately.

Condition: used, Year of construction: 1993, Fabricant : PRB / Marchesini Group Model : Pocket 3 Year : 1993 Type : Case packer Blov Stkex R Dapo Snsc Application: packing cases into boxes Manufacturer data: Case features: side a: min. 200 - max. 550 mm side b: min. 120 - max. 330 mm side c: min. 130 - max. 350 mm Case features: L dimension: min. 20 - max. 550 mm l dimension: min. 10 - max. 130 mm height: min. 75 - max. 200 mm Tape characteristics: External diameter max: 220 mm Chuck diameter: 77mm Band width: 30 - 60 mm Weight : 1350 kg

Condition: used, Year of construction: 1990, Manufacturer : CERMEX Model: SL2100 Type : Case packer Year: 1990 Automatic machine for grouping and boxing products Side boxing with tape sealing (adhesive tape) Adjustable format changeover Previous format : Bev Sex R A H Ujtk Snslc Length: 398 mm Width: 260 mm Height: 315 mm   Mini / maxi cases: to be confirmed according to specifications Mini / maxi cartons: to be confirmed according to specifications

Condition: used, Year of construction: 1997, Manufacturer : Supertape Systems Model: H6 Year : 1997 Type: taping / sealing machine for cartons. Operating mode: semi-automatic Bljv Sjx R Atujtk Snsc Max carton width : 280 mm Maximum height: 250 mm

Condition: used, Year of construction: 2000, 1 – Semi-automatic lower flap folder Manufacturer : Soco System Model: F-100-P Year: 2000 Carton size :Format carton : Min. carton width : 320 mm Max. carton width: 520 mm Max. case length: 700 mm 2 – Automatic case and flap sealer / Tape sealing machine Manufacturer : Soco System Model: T-400 5-5-7 Year: 1989 Adhesive top and bottom closure. Capacity: Max. 18/min. Bsv Stkex R Aqyj Snelc Carton size :Format carton : Mini: 200 x 120 x 95 Max: 550 x 460 x 470

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: Flex mode 04 2.5 1CL, type of input current: three-phase, total height: 1,400 mm, input voltage: 380 V, total width: 4,000 mm, total length: 4,000 mm, overall weight: 2,500 kg, working height: 750 mm, compressed air connection: 6 bar, feed length X-axis: 2,500 mm, feed length Y-axis: 999,999,999 mm, feed length Z-axis: 10 mm, input current: 16 A, air pressure: 6 bar, Cardboard cutting and creasing machine for the production of packaging, boxes, and trays Bjv Stk Ssycl T Hjnjlc

Condition: good (used), Die-cutting machine for cardboard, useful width 2500 mm. Can feed three different sizes of cardboard into the machine. Bev Stoyf D N Ssk Snslc

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 47030312, overall weight: 1,200 kg, air pressure: 6 bar, Carton erector by TMG, type FORMPAQ, model Formec 4 Speed - c - dx, serial number 4.703.03.12, year of manufacture 2012, power 2.6 kW / 7.7 A, required system compressed air 6/7 bar, product dimensions (LxWxH) in mm (min.) 345x330x115 / (max.) 750x610x400. Without Nordson gluing unit. Bljv Stsw Rz Szek Snsc Delivery possible upon request!