Used other waste management & recycling machinery for sale (89)

Year of construction: 2013, condition: used, We offer you a used PET bottle crusher of the manufacturer BOREMA, type R-1200 F, year of construction 2013, for residual emptying, deaeration and pre-compaction of the fed PET bottles, from 0.3 up to 2.5 l content. The machine has a chassis and can be moved into and out of the feed chute of your baler. The machine has a throughput capacity of approx. 85,000 bottles/h, corresponding to approx. 3t/h. We have the following technical information: Manufacturer: BOREMA Umwelttecjhnik AG Type: R-1200 F (with trolley for retracting and extending) Year of manufacture: 2013 Drive power: 11 kW Connected load: 15 kW Rated current: 32 A Back-up fuse: 40 A Type of construction: Continuous system Function: Double rotor press system Rotor pretension pneumatic: approx. 16t Overload protection: by anti-blocking system Input material: PET disposable and returnable empty bottles 0.3 to 2.5 L capacity Input material: HDPE bottles and canisters up to 3 l capacity Throughput capacity: approx. 3 t/hour, corresponding to approx. 85,000 bottles/hour, depending on size Required compressed air output: G1/2", 8 bar, 40 l/min. Compression ratio: 1:3 Bljv Sou Thpnjtk Snoc Flange dimensions inside: 972 x 1220 mm Feed opening: 565 x 1280mm Weight: approx. 2500kg Possible applications: Due to the chassis, the PET flattener can be moved into the feed chute of your baler as required, thus ensuring residual emptying, venting and pre-compaction of the fed bottles and canisters. When the material is changed, the PET flattener is simply moved out of the feed chute again and paper, cardboard, film, etc. can now be pressed further without using the flattener. Process of the BOREMA PET crusher: The plastic packages are drawn in by two rotating shafts. One of the rotating shafts is pneumatically pretensioned by two air bellows and presses the PET bottles with 16 t of pressure against the second rotating shaft. In the process, the closed plastic bottle is squeezed together, caused to burst and vented. Residual liquids run out and the material falls into the baler in a precompressed state. When impurities are introduced, the pneumatically pre-tensioned shaft deflects to the side and the impurities are channeled through. Significant advantages compared to conventional PET perforators with punching mandrels or knives: The BOREMA process is much more efficient and less subject to wear than conventional PET perforators with punching mandrels or knives. The biggest advantage is that any foreign matter such as metal parts, stones, bottles with frozen contents and pieces of wood are passed through the pneumatically deflecting rotor shaft without stopping the operation of the system or causing any major damage. With conventional perforators, mandrels or blades sometimes break off or become so jammed with the interfering material that the plant has to be shut down and repaired at great expense. Comments: The crusher is in good condition, was dismantled from the running operation, stored, is available at short notice and after assembly immediately ready for use. The documentation (manual, CE, electrical/hydraulic circuit diagram) is complete. An inspection is possible by arrangement. The technical information is taken from sales brochures, the operating instructions or other information provided by the manufacturer. We accept no liability for incomplete or incorrect data and informations.

Year of construction: 2013, condition: used, Technical data of the bale opener line for RDF. MSW, paper, cardboard: Manufacturer Cross Wrap Oy Ltd, Siilinjärvi, Finland Type BO 4000 Year of manufacture 2015 Quantity of opened bales 674 pieces Operating time only 3 days, exclusively by running in the entire line during new installation Opening time approx. 45 seconds per bale Bale dimensions (W x H x L) 1100 x 1100 x 1400 - 1900 mm Max. Bale weight 2,000 kg Conveying height of the system 1,400 mm Max. Conveying width of the system 1,200 mm Material to be opened RDF/MSW Availability of the line 98% Noise level of the bale opener line 85 dB(A) Total connected load 37 kW Rated current 125 A Operating display SIEMENS SIMATIC HMI Touch Control SIEMENS S7 ET200S Installation dimensions 8,463 x 2,890 x 3,960 mm (l x w x h) Scope of delivery: Feed conveyor 3,500 x 1,200 x 1,400 mm Feed conveyor to opener 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in hydraulic oil tank Heating in control cabinet Oil cooler in Hydraulic unit Explanation of the short period of use: The entire line of Cross Wrap bale openers type BO 4000 was installed at a municipal waste incineration plant in 2015. The background to the installation was that in the case of a malfunction or maintenance of the incinerator, the municipal waste could continue to be received, baled, wrapped and stored until the malfunction was cleared. Then the bales should all be opened again and the waste fed into the normal incineration process. This worst-case scenario never came to pass. The plant was set up, run in and then never used in regular operation. Only during the commissioning and running-in of the entire plant in 2015 were 674 bales opened on three days. The plant is in very good condition and ready for operation immediately. Due to reconstruction measures in the incineration plant, the installation area of the bale opener was needed. As a result, the entire line is for sale. Short description of the wrapping process: The pressed bales are placed on the infeed conveyor belt from the side or from behind by means of a forklift truck. For opening, the bales must run horizontally to the conveyor belt with the wire or twine binding, otherwise the bales must be turned 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or twine strapping. The front and rear rotating knives slit the bale lengthwise. Afterwards, the gripper returns to the starting position. The opened bale is now conveyed via the conveyor belt to the discharge chute and then falls onto the following conveyor system. Blev Stk Sju Tg I Denoc Comments: New price of the completely plant 296.000,- €. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) is complete. The unit has been dismantled into freight-manageable units, stored and is available for inspection and loading at short notice. We do not accept any liability for the technical details or any errors.

Condition: good (used), Year of construction: 2012, functionality: fully functional, Rotary Airlock Valve / Rotary Valve Nestro, year of manufacture 2012, for the separation / differentiation of paper chips or paper edge strips Technical data: Manufacturer: Nestro Lufttechnik GmbH Year of manufacture: approx. 2012 Motor: 4 kW Max. volumetric flow: 28,000 m³/h Max. inlet diameter: 450 mm Speed: 22 rpm Rotor width: 1,500 mm Rotor diameter: 1,200 mm Dimensions: 2,200 x 2,200 x 2,500 mm (LxWxH) Weight: approx. 3,000 kg Remarks: The machine is in good condition. It has been inspected and tested at our facility in 28816 Stuhr. You can find the video above on our website or on our YouTube channel. Inspections, including under power, are possible at any time by prior arrangement. We are happy to answer your questions about the machine by phone, Monday to Thursday from 08:00 to 14:00. On Fridays, we are available from 08:00 to 13:00. Blev Stk Ssx Uz I Ssnsc Please note: All technical data is based on information provided by the manufacturer. We do not accept liability for the stated information or possible errors. Offers are non-binding, subject to prior sale, and may be withdrawn at any time. Inspections are possible by arrangement. Sale is ex-works, advance payment required, without warranty or guarantee.

Year of construction: 2026, condition: new, functionality: fully functional, This robust professional cable stripping machine, model KM1-F, processes electrical cables with diameters ranging from 1 to 70 mm. This model features speed control via a frequency inverter. - The blades are hardened, ensuring they do not dull quickly when stripping armored cables. - The machine has 15 different cable feed entries. - The rollers feature grooves on their beveled surfaces for improved grip on the cables. - The cable is cut from both sides, allowing the copper core to be easily removed. - It is also suitable for stripping rubber and flat cables. - The machine meets all safety requirements. - A comprehensive service manual and user instructions are included. - Maintenance procedures are also detailed in the documentation. Blev Stkeyfw Ege Snoc Technical specifications: - Power supply: 230 V ~ 50 Hz - Power: 2200 watts with geared drive - Dimensions: 60 cm long x 75 cm wide x 90 cm high - Machine speed: adjustable - Output: Depending on the cable type, between 400 and 1200 kg/day - Weight: 185 kg - Price includes VAT Spare parts such as blades, drives, bearings, etc., are also available. If desired, we can also perform maintenance on these machines. A machine that is ready for immediate use and easy to operate. If you would like to test it, please bring your own cable.

Year of construction: 2002, condition: like new (used), functionality: fully functional, L x W x H: approx. 12,1 x 3,0 x 3,25 m Bov Stk Sollvpzsnslc Volume: 55 cbm capacity: approx. 150 m³/h 6 dosing-/discharging-screws - pair driven each 11 kW weight: approx. 15 t.,

Condition: used, For the unloading, dosing and pneumatic transportation of different bulk materials like RDF, SRF, wood chips, animal food etc. consisting of: - 1 piece of unloading station level sensors and volumetric dosing - hydraulics for automated unloading of moving floor trailers - chain conveyor for discharge of the material - rotary valve for pneumatic dosing Bjv Sex Szb Hjtk Snelc - blower for pneumatic dosing More information and pictures can be sent on request.

Year of construction: 2008, condition: ready for operation (used), A large-format single-shaft shredder Vecoplan is available. Rotor diameter: 370mm, effective rotor length: 1300mm, speed: 120rpm, knife rows: 37, knife dimensions X/Y: 40mm/40mm, feed opening X/Y: 1400mm/1300mm, hopper volume: approx. 3m³. Machine dimensions X/Y/Z: 3200mm/2400mm/1500mm, weight: approx. 5500kg. An on-site inspection is possible. Bjveyddyze Stk Snelc

Year of construction: 2026, operating hours: 5 h, condition: new, Equipment: AdBlue, Arjes Impaktor 250 EVO II Shredder – Ideal for construction debris, concrete, bulky materials, asphalt, roofing felt, wood, mixed waste, biomass, rubber, plastic, ceramics, photovoltaic panels, and other materials. The basic machine price includes (already contained): - Complete shaft set with bearing cassette of choice (for concrete, wood, biomass, mixed waste, others) Bov Stsyf Ni Dok Snjlc - Sprinklers for dust reduction - Cross-belt permanent magnet (separates steel elements to the side) - Side discharge hopper under the magnet - Shaping bars

Condition: excellent (used), functionality: fully functional, 1. Permanent Magnetic Separator – SK25 (250 mm) Blsv Ssx Ekpaotk Snsc Ferrous metal removal unit used inline in the ducting system to protect machinery and ensure clean, contaminant-free material. Key Features: • 250mm diameter • High-strength magnetic core • Inline installation • Removes staples, clips, and metal fragments • Improves bedding quality Price: £900

Condition: excellent (used), functionality: fully functional, Large-format inline magnetic separator for capturing ferrous contaminants before material enters the balers. Key Features: Blevjx Ekn Ao Stk Snoc • 300mm diameter • Industrial-grade magnetic assembly • Reduces equipment damage • Improves purity of finished product Price: £1,400

Year of construction: 2026, operating hours: 1 h, condition: like new (used), functionality: fully functional, Description of the operating principle of the tire separator: The WAGNER used tire dismantling unit is designed, developed, and built so that the tire can be separated from the steel rim simply, quickly, and efficiently. The pressing process takes approximately 60 seconds. This is ensured by the powerful hydraulic system, engineered for long service life. The passenger car tire is placed onto the tire press machine. By actuating both valve levers (accident protection), the three hydraulic cylinders extend and press the tire together with the rim. Blevjyffrue Stk Snoc

Condition: ready for operation (used), Ventilator Driving: 22 kW Bev Stk Senac Ilsnslc

Condition: ready for operation (used), a pallet Couplings (unused) Brand: Krupp Diameter from 200mm till 800mm Blov Sei A Au Dstk Snjc Tot. Weight appr. 25-35 tons

Condition: ready for operation (used), Rollers unused, year of manufacture 2015 510 pieces with Lenght: 380 mm — Diameter: 133 mm — Axis: 30 mm. *Brand: Precimeca / Continental:= SOLD OUT Bev Soi A Awmjtk Snjlc 857 pieces with Lenght: 750 mm — Diameter:  133 mm — Axis: 30 mm.= SOLD OUT 341 pieces with Lenght: 530 mm — Diameter: 133 mm — Axis: 30 mm.= SOLD OUT

Condition: ready for operation (used), Specifications: Model: 1120SPL Bov Stexvc D Usk Snelc Manufacturer: Hosokawa Polymer Systems (USA) Cutting chamber: 11" x 20" (279mm x 508mm) Motor: 20 HP / 15 kW, 400V, 3 Phase Rotor diameter: 12.5" (318mm) Rotor knives: 3 Bed knife: 1 Screen area: 373 in² (2406 cm²) Typical throughput: up to 650 lbs/hr (≈295 kg/hr) depending on material and screen size Approx. weight: 1,600 lbs (726 kg) Dimensions: L 69” x W 36” x H 57” (1753 x 914 x 1448mm) Features: Heavy-duty welded steel construction Easy access for cleaning and maintenance Safety interlocks and belt-driven motor Ideal for press-side, post-production, or recycling use Clean and well-maintained unit – ready to run

Condition: ready for operation (used), Specifications of NEUE Herbold SB 60/145 S7-3 Motor Power: 70kw Feed Opening: (approximately 620 mm x 565 mm) Rotor Configuration: 5-knife open rotor staggered Bed Knives: 2 Installed Screen: 3/16" (approximately 4.76 mm) Additional Equipment: Control panel with soft-start feature Blsvew R Un Ao Stk Snoc Voltage: 460V / 3-phase / 60 Hz Extras: Includes seven extra screens We supply a wide range of granulators designed for plastics recycling, manufacturing, and waste reduction. Whether you need compact units for light-duty use or heavy-duty machines for high-output production, we have the right solution.

Condition: used, functionality: fully functional, operation weight: 14,300 kg, Year of construction: 2016, RENTAL The machine offered is available for rent only!!! Prices: Bljvswtq Ifj Stk Snjc Daily rate from €780.00 Weekly rate from €3,200.00 Prices exclude VAT

Condition: used, Year of construction: 2019, Lifter-tipper system for containers for sale/rent, unused! Type – HKV Bljvjycgb Ee Stk Snec Manufacturer – Ludden & Mennekes Year of manufacture – 2019 Fits 4-wheel MGB, flat lid, and also for 2-wheel 240 ltr MGB.

Condition: ready for operation (used), functionality: fully functional, power: 83 kW (112.85 HP), overall weight: 6,000 kg, total length: 460,000 mm, total width: 4,000 mm, total height: 4,300 mm, Year of construction: 2024, operating hours: 300 h, type of input current: three-phase, With shredder, centrifuge, and big bag filling station. Includes spark detection and extinguishing system. Approx. 300 operating hours, year of manufacture 2024. Suitable for stainless steel, nickel alloy, and titanium. Throughput capacity up to 1 ton/hour, depending on material. Total connected load: 83 kW. Overall length: 46 m. Height: 6.2 m. Price on request. Available at short notice. Location: Germany. Blev Sjq Nmw Ijtk Snec

Year of construction: 2002, operating hours: 12,000 h, condition: ready for operation (used), functionality: fully functional, power: 382 kW (519.37 HP), transport height: 4,000 mm, MACHINE DETAILS Shreddable materials: metals, aluminium, plastic, wood, cars Transport height: 4,000 mm Power: 382.46 kW Operating hours: 12,000 h EQUIPMENT Remote control Overband magnet Bev Stk Ssx U S I Aonolc Semi-trailer

Year of construction: 2010, condition: good (used), Air shower booth for cleaning work clothing The unit is mounted on a pallet and also features a crane eye for easy relocation. Bev Stex I Nidjk Snolc Power supply: 400 volts

Condition: ready for operation (used), Optical separator scheider Titech Tomra Brand: Titech Tomra Type: Autosort NIR1 S2000 X-L Blov Sjx Str Rotk Snec Incl.: belt conveyor length 5000 mm, Beltwidth 2000 mm.

Condition: ready for operation (used), Optical separator Titech Tomra Brand: Titech Tomra Type: Autosort NIR1 S2000 X-L Bljvjx Sttbs Stk Snec

Year of construction: 2014, condition: ready for operation (used), An industrial Pyreg pyrolysis plant for the thermochemical utilization of biogenic residual materials is available. Fuel capacity: 500kW/module, max. fuel throughput capacity per module: 1375kg/year, min. fuel lower heating value on dry basis: 10MJ/kg, max. fuel moisture content: 50%, biochar production: 40kg/h, thermal heat output (exhaust gas heat): 150kW, power consumption: approx. 7.5kW. Plant dimensions X/Y/Z: approx. 9000mm/3000mm/3000mm, weight: approx. 10000kg, control system: PLC. Documentation available. An on-site inspection is possible. Blovex Sywgs Stk Snoc

Condition: new, Year of construction: 2026, functionality: fully functional, The Mercedes of cable peeling machines! The PR3 Evolution is produced entirely in our factory near Ulm. All purchased parts come from well-known manufacturers such as Siemens (electrical), Rittal (switch cabinet), KEB (gear motor) and Nachi (ball bearings). A machine truly MADE IN GERMANY! Robust, reliable and safe. The PR3 Evolution complies with the EC Machinery Directive 2006/42/EC Annex II A Technical data: Motor power 4kW / 380 V Cutting speed 44m / min Working range Blsv Stk Sougt Dxjnoc 1.5 mm2 - Ø 90 mm weight approx. 700 kg Dimensions W 1000 x L 1800 x H 1520 mm Paint finish Ral 7037 / 7035 Subject to technical modifications 40 years of experience and over 500 machines sold worldwide speak for themselves.