Used Controller for sale (43,427)

Year of construction: 2003, operating hours: 70,263 h, condition: ready for operation (used), functionality: fully functional, overall weight: 182 kg, total length: 880 mm, total width: 660 mm, total height: 1,150 mm, machine/vehicle number: 14-21425, MACHINE DETAILS Bsvoyf Dr Hj Stk Snolc Dimensions & Weight Dimensions (L x W x H): 880 x 660 x 1,150 mm Weight: 182 kg Operating hours: 70,263 h

Year of construction: 2003, operating hours: 64,363 h, condition: ready for operation (used), functionality: fully functional, overall weight: 182 kg, total length: 880 mm, total width: 660 mm, total height: 1,150 mm, machine/vehicle number: 14-22267, MACHINE DETAILS Blsvjyf A E So Stk Snec Dimensions & Weight Dimensions (L x W x H): 880 x 660 x 1,150 mm Weight: 182 kg Operating hours: 64,363 h

Year of construction: 2003, operating hours: 59,762 h, condition: ready for operation (used), functionality: fully functional, overall weight: 182 kg, total length: 880 mm, total width: 660 mm, total height: 1,150 mm, machine/vehicle number: 14-26298, MACHINE DETAILS Dimensions & Weight Blev Soyf Apqotk Snoc Weight: 182 kg Dimensions (L x W x H): 880 x 660 x 1,150 mm Operating hours: 59,762 h EQUIPMENT Robot handheld control device

Year of construction: 1994, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 30194.117.0, MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 800 x 800 x 1,850 mm Weight: 310 kg EQUIPMENT Roll bar Cable set Robot hand control unit Control software Logbook Blov Stk Sjyf Aidenec

Condition: good (used), Year of construction: 2006, control FANUC 21i-TB Control x-axis 390 mm z-axis 780 mm spindle taper A2-11 number of spindle speeds 2000rpm engine output 37 kW weight of the machine ca. 9000 kg dimensions of the machine ca. 1905,0 × 2720,0 × 3260,0 m Bjv Sovzln Rstk Snslc The machine has chucks that can produce gears from 100 to 500 mm. Special chuck is available

Condition: good (used), Year of construction: 2003, Tilting panel saw Altendorf F45 with ELMO IV-plus package, 2-axis scorer, 3m table, and Control-Plus control Sliding table length: 3000 mm Saw blade tilting from 0 to 45 degrees Speeds: 3000, 4000, 5000, and 6000 rpm with electronic speed display Drive motor: 5.5 kW with automatic motor brake Bjvexw Ii Se Stk Snjlc Control panel at eye level with Control-Plus control 4-axis CNC controlled Cutting of chain measurements and grooves on the rip fence and crosscut fence Cutting width correction on the rip fence and crosscut fence with tilted saw blade 600 cutting programs Calculator function with direct transfer of results to the respective axis Tool management Saw blade diameter up to 450 mm Max. cutting height: 150 mm Cutting width up to 1040 mm, electrically adjustable Tilting angle and height adjustment electrically adjustable Crosscut fence rail up to approx. 3210 mm, electrically adjustable, automatic coupling of the second stop flap for large dimensions Folding rip fence Extraction outlets: 120 + 80 mm Sliding carriage lockable Additional mitre fence rail 2 used saw blades and one scorer blade 2 riving knives 2-axis scoring unit, electrically adjustable during operation 2 blade guards 3 emergency stop switches Clipboard at the control panel CE marking Machine shows signs of wear. No cuts in the sliding table. Original paint (special paint finish), partially repainted in some areas. Machine has 18,985 operating hours. It originates from a furniture factory and has been regularly serviced and well-maintained. Condition as per original photos. A video of the machine in operation can be provided upon request. Approx. dimensions: 3150 x 3750 x 1900 mm (L x W x H). Weight approx. 1400 kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this seller".

Condition: excellent (used), Control cabinet, distribution cabinet, switch cabinet, baying cabinet, server cabinet, electrical cabinet Bev Stk Sjygh E Hsnjlc -Control cabinet: Electrical cabinet, server cabinet, unused -Type: 1-winged -Door: lockable -Overall dimensions: WDH 800/850/2190 mm -Weight 211 kg

Condition: excellent (used), ABB IRC5 Controller USED,20% discount at order more then 1 unit DEVELOPMENT OF GSG ROBOTICS Bov Stk Ssxq Tvdonslc GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc.

Condition: excellent (used), Year of construction: 2013, ABB IRC5 Controller,20% discount at order more then 1 unit. DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc. Bjv Stk Ssxq Tumonslc

Condition: excellent (used), Year of construction: 2014, ABB IRB7600-340/2.8 IRC5 controller DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc. Blovsxq Tuas Stk Snec

Condition: excellent (used), Year of construction: 2016, ABB IRB4400L-10+IRC5 controller+TPU-Low DTC DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc. Bljv Stexq Tt Nok Snec

Condition: new, Year of construction: 2022, ABB IRC5 Controller NEW Bov Stkjxq Ttvj Snelc DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc.

Condition: new, Year of construction: 2019, ABB IRB1660ID+Controller+TPU+Cables Brand New DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc. Bev Stkjxq Ttps Snelc

Condition: excellent (used), Year of construction: 2021, operating hours: 2,600 h, ABB IRB4600-45/2.05 Robot and IRC5 controller-TPU-RW6.X Bevoxq Tq Us Stk Snelc DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc.

Condition: excellent (used), ABB IRB4600-60/2.05 Robot and IRC5 VELOPMENT OF GSG ROBOTICS Blovjxq Tq Is Stk Snoc GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc.

Condition: good (used), functionality: fully functional, Hydraulic press brake: AMADA type ITS2 25-12, year: 1993, very robust model from the leading manufacturer of this machine type. Bending length: 1250 mm; Between uprights: 1050 mm, Opening: 200 mm, stroke 180 mm; Pressure: 25 t. OPEII operator panel with graphic CNC control, Polish language, 14" color TFT screen. Controlled axes: -Y-X-R1-R2 + automatic table bending compensation. Machine weight 2.3 tons. Drive power 4.5 kW. Bjv Stkoyf Akho Snolc

Condition: used, New 2007 Seimens Sinumerik control Swing over bed Ø460 mm Swing over cross slide Ø258 mm Swing in the gap Ø670 mm Turning Length 1500 mm Spindle bore 58 mm Spindle power 7.5 kW Spindle taper 4 Mt Bev Stkjwtpzqj Snslc Speeds ranges 3000 Rpm Feed rate X-Axis 5000 mm/min. Feed rate Z-Axis 5000 mm/min.

Year of construction: 2022, condition: excellent (used), functionality: fully functional, Temperer Thermo Quick Duo Tempering machine for couverture Model: Thermo-Quick Duo with 2 removable bowls Bsv Stkjygda He Snolc Thermostat-controlled (70°C) Connection: 230 V Dimensions: 760 x 410 x 240 mm (W x D x H) Used machine We have many more machines in stock!

Condition: excellent (used), RS Simulators Type: KKM 110/45 Manufacturer: RS Simulators, water-cooled Climatic chamber 110 m³ incl. condenser unit The KKM 110/45 model is part of the TKM/KKM modular system by RS Simulators—a modular climatic chamber that is assembled on-site. This design offers: Modularity: Individual segments are preassembled and set up at the customer’s location. This makes retrofitting (adding depth or expansion modules) and later relocation straightforward. Technical specifications climatic chamber: Manufacturer: RS-Simulatoren Prüf- und Messtechnik GmbH Model: KKM 110/45 External dimensions: 6200 x 9400 x 3400 mm (W x D x H), incl. technical attachments Internal dimensions: 5900 x 7000 x 2960 mm (W x D x H) Chamber door (double-leaf): 3600 x 2930 mm (W x H) Personnel door (single-leaf) in side wall: 1880 x 900 mm (H x W) Feedthroughs: 8 x Ø120 mm (4x left & 4x right) Windows: 1x (460 x 550 mm) in front chamber door, heated 1x (1260 x 1000 mm) in left side wall, heated Temperature range: -40°C to +120°C Temperature fluctuation: ± 0.8K – 1.5K as per DIN 50011 with empty test area Humidity range: 10% to 95% Humidity tolerance: +/- 5.0% Refrigerant: 2x R404A 52 kg 2x R23 17 kg Temperature change rate: Heating: 1.0 K/min Cooling: 1.0 K/min Electrical data: Voltage: 3x400V/N/PE Current: 340A Weight: approx. 2,000 kg For your safety as a buyer, please note the following information! The following points are always carried out on the chambers we offer prior to sale: 1. Functional check and replacement of necessary components Blov Stkowwg Uvo Snsc 2. If necessary, refilling with legally compliant refrigerant 3. Leak testing with certification 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Specifications and technical details are subject to change and error!) If you have further questions, we will be happy to answer them by phone.

Condition: used, tank capacity: 16,000 l, 16,000 liter temperature-controlled mixing tank made of V2A stainless steel with anchor agitator Bljv Stsyfwnnsk Snsc

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 4480, turning diameter over cross slide: 570 mm, turning length: 1,500 mm, Cycle lathe Seiger SLZ 570E Year of manufacture: 2008 Accessories Bsv Stkjyfm R So Snolc

Condition: excellent (used), Steadies for lathe VDF BOEHRINGER Type: V 800 Bljv Steyfny Ujk Snsc 1. Fixed steady 1. Travelling steady In very good condition.

Condition: used, Double-Girder Overhead Travelling Crane, Bridge Crane KONECRANES Type XLD 32t Serial No. 18 / 4363310 Year of manufacture: 2002 Load capacity: 32 tons Span: 5750 mm Lifting height: max. 12.5 meters Girder height: 560 mm (2 bridge crane girders) Travel speed (crane): 20 m/min, infinitely variable via frequency inverter Trolley travel speed: 16 m/min, stepless via frequency inverter Hoist with double-girder trolley KONECRANES Type XL516N40HDC424B0EE (XL500) Serial No. (hoist): C00204, Year: 2002 Crane classification: DIN 15011 (FEM 1.001) "M4"/"1Am" Rated load: 32 tons Hook path: max. 12.5 meters Main hoist speed: 2.5 m/min Fine hoist speed: 0.42 m/min Trolley gauge: 2400 mm - Trolley with double-girder drive - Equipped with REMOX radio remote control (frequency 434.675 MHz) - Double load hook (twin hook) - Complete cable drag chain for power supply - Electrical control cabinet located on the bridge - Very low operating hours Main hoist motor power: 18 kW Auxiliary hoist motor power: 3 kW Power supply: 400 Volts, 50 Hz Transport dimensions (L x W x H): 6000 x 2450 x 2800 mm Total weight: approx. 5000 kg Bjv Stk Ssx Edq Ijnelc In very good condition

Condition: good (used), Year of construction: 2015, CNC milling control Heidenhain TNC 128, year 2015 In good condition with handwheel. Blevjwr Da Se Stk Snoc

Condition: excellent (used), For sale: professional defibrillator/monitor LIFEPAK 15, a highly regarded model from Physio-Control / Stryker, year of manufacture: 2017. The device powers on fully – the display, menu, and rhythm monitoring functions work correctly (as shown in the photos). Equipment and features: • LIFEPAK 15 monitor/defibrillator – REF 99577-001390 • Serial number: 45974928 • Year of manufacture: 2017 • Two LP15 MPB batteries • Integrated thermal printer • Modules: ECG, SpO₂, NIBP, CO₂ (ports visible in the photos) • Manual and AED modes • Large color display Bsv Stexy S I Rek Snslc • Original side and top carrying bags Condition: Used equipment, in good technical condition. Typical signs of use on the housing, no mechanical damage. The device starts up and enters operation mode – see photos for demonstration. Ideal for: • Medical facilities • Emergency rescue services • Medical event coverage • Training and educational medical applications Viewing and testing on site possible. Courier shipping or personal pickup available.