Used Forging Manipulators for sale (457)

Condition: new, Say-Mak SPH 50 - Pneumatic forging hammer Blev Stk Sjuzhkrsnec - Welded steel construction - Regular striking with valve adjustment - Pneumatic working system with 2 pistons - Hour counter - All dies and sal-block interchangeable, sal-block adjustable in 8 directions - Adjustable sal-block for the operator's working angle - Simple and functional automatic lubrication system for front and rear pistons - Adjustable foot pedal depending on working height and foot protection cover - 360° adjustable flanged plunger and plexiglass cover - incl. steel foundation Technical specifications - Operating mode: pneumatic - Drop weight: 50 kg - Lifting height: 185 mm - Motor power: 4 kW - Weight: 1000 kg - Dimensions WxHxD: 730 x 1450 x 1750 mm

Condition: new, Year of construction: 2025, pressing force: 20 t, 20 T Single-Column Forging Press (DCS-20) Technical Specifications - Press Pressing capacity: 5–20 t (adjustable) Maximum installation height: 700 mm Table usable area: 500 x 600 mm Ram usable area: 500 x 600 mm Frame type: C-frame Table height from floor: 800 mm Overall dimensions (W x D x H): approx. 1,450 x 1,500 x 2,400 mm Total weight: approx. 1,900 kg T-slots: according to DIN 650 (18 mm) or machined to customer specifications Hydraulic Cylinder Piston stroke: 0–500 mm (adjustable) Bov Stjyght Rsk Snslc Cylinder diameter: Ø 90 mm (1 pc.) Piston rod diameter: Ø 60 mm (1 pc.) Rapid traverse cylinder diameter: Ø 40 mm (1 pc.) Rapid traverse piston rod diameter: Ø 25 mm (1 pc.) Max. working pressure: 250 bar (adjustable) Return speed: 140 mm/s Rapid traverse speed: 140 mm/s Pressing speed: 4–10 mm/s (adjustable) Pressure build-up time (closed tool): max. 2 s (steel on steel) Hydraulic Unit Hydraulic pump: REXROTH, 22 l/min (1 pc.) Motor power: 7.5 kW (1 pc.) Pressure accuracy during pressing stroke: ±5 bar Oil tank capacity: 150 l Mounting: Hydraulic unit mounted at the rear/top of the press Hydraulic manifold and valves: HYDROPACK Air filter and oil filter: FILTREC Oil level: electronic oil level switch Electrical Connection Main supply: 400 V AC Control voltage: 24 V DC Frequency: 50 Hz Main hydraulic motor connection: 7.5 kW Total connected load: approx. 10 kW

Condition: used, Year of construction: 1999, ram hammer weight 26 kg ram hammer stroke 200 mm Blev Stkeqwpxbs Snoc type KO 596 no. of strokes 220 Hub/min air hammer

Condition: excellent (used), Year of construction: 2005, Industrial manipulators (2 units) Mounting: ceiling-mounted Ceiling guide length: approx. 15 meters Number of axes: 4 Load capacity: Manipulator 1: 30 kg Manipulator 2: 35 kg Gripper: pneumatic part gripper (for each manipulator) Bov Stkjwvi Upj Snjlc Year of manufacture: 2005

Condition: used, Year of construction: 1957, ram hammer weight 200 kg ram hammer stroke 525 mm no. of strokes 150 /min impact energy 420 kJ Bsv Ssvzxpbjtk Snelc distance lower die block / ram gudeway 435 mm Throat 425 mm steel forging - rectangular up to 110 mm steel forging - diameter up to 125 mm power requirement 22,0 kW weight of hammer 3,9 t weight of anvil 3,0 t weight 6,9 t dimensions (WxDxH) 1,1 x 2,3 x 2,4 m Forging hammer as is where is, WITHOUT putting into operation

Condition: used, Year of construction: 1961, ram hammer weight 750 kg ram hammer stroke 660 mm no. of strokes 100 /min impact energy 2040 kJ distance lower die block / ram gudeway 6600 mm Throat 750 mm steel forging - rectangular up to 240 mm steel forging - diameter up to 270 mm power requirement 75,0 kW weight of hammer 16,5 t weight of anvil 15,5 t weight 32,0 t dimensions (WxDxH) 3,2 x 1,45 x 3,45 m SPECIAL OFFER Forging hammer as is where is, WITHOUT putting into operation / WITHOUT additional work, free loaded to truck Blov Stk Sevuullenec video at seller's site before dismantling available

Condition: used, Year of construction: 1970, pressure . t Blevoud Tp Nj Stk Snjc stroke . mm impact capacity 60-70 mkp total power requirement . kW weight of the machine ca. 3 t dimensions of the machine ca. . m

Condition: good (used), Anvil with base -LxWxH: 1000x350x360 mm (anvil dimensions) -Weight approx. 300 kg Bljv Stkox N Ew Ts Snjc Subject to errors and input mistakes.

Condition: used, Year of construction: 1983, nominal force 2500 t Bsv Stjwmf Tvek Snolc stroke 600 mm cycle time 13 - 18 s distance between columns 1720 mm Distance table/ram, max. stroke up, adjustment up 2600 mm table surface area 1720 x 1800 mm allowed max. force 4000 t blow die to die 5000 t ram surface 2100 x 1320 mm capacity of ejector in table 40 t ejector stroke in table 250 mm ejector surface area in table 900 x 820 mm capacity of ejector in ram 6 t ejector stroke in ram 40 mm spindle diameter 425 mm power requirement 900,0 kW weight 335,0 t Dimensions (WxDxH) 3,4 x 4,6 x 9,7 m height over floor 8,3 m fully automated forging line / spindle press with automation for the production of flanged shafts for hot forming only with reversible AC motor, pneumatic brake, plate ejector in table (40 t / 250 mm), ejector in ram (6 t / 40 mm), lifting device for repositioning, marking, tool change, insertion device, tilting device, loading and unloading arm, rotary table, circular oil lubrication, centralised grease lubrication cycle time approx. 13 - 18 s as is where is, WITHOUT putting into operation

Condition: used, Year of construction: 2017, Manufacturer: Manut LM Model : MAN Year: 2017 Body type : Vacuum Tube Manipulator Application : Handling of bags and boxes Blev Stex R A Nvjk Snec Maximum load : 30 kg Classification: ATEX Vacuum pump : Becker SV 8 400/2 Dimensions : see photo drawing.

Condition: good (used), blacksmith's vise, bottle vise, anvil vise, anvil, blacksmith's anvil, bench vise, locksmith's vise, parallel vise -Jaw width: 135 mm -Wingspan: 150 mm Bov Sjdl E Irjtk Snslc -Number: 9 vises available -Price: per piece -Dimensions: 450/160/H900 mm -Weight: 35 kg

Condition: excellent (used), Year of construction: 2014, Vacuum unit for e.g. manipulator, Dalmec - used - : Price (net), ex location: only €995 Blsv Stovzli Iok Snsc Manufacturer: dalmec Type: vacuum lifter Year of manufacture: 2014 Code: 85.16.0991 Load capacity: 7kg. Operating pressure: 0.60Mpa With this unit, plastic stacking boxes with external dimensions (LxWxH): 1,190 x 610 x 420mm filled with cable harnesses were lifted (see photos below) Condition: very good Available: immediately Location: Emden, later warehouse Frankenberg / Saxony

Condition: not inspected (used), turning diameter: 6,300 mm, center width: 1,000 mm, workpiece weight (max.): 80,000 kg, overall weight: 15,960 kg, Used machine min. diameter: 1000mm Blov Sevtq H Nstk Snec max. diameter: 6300mm Workpiece weight 80,000 kg EG: 15,960 kg

Condition: used, We offer for sale manipulators (new) as well as used single axes, accessories, and wiring. Delivery term: EXW Trstena Minimum order value: €5,000 Blsv Stsyc Rv Tsk Snsc

Condition: used, Year of construction: 2000, 2 Schmalz vacuum lifters, year of manufacture 2000 The lifting devices were stored in working condition but are no longer needed. The smaller unit has a lifting capacity of 500 kg, the larger one 2,000 kg. The price is per unit. Only the vacuum lifters are being offered, not the other items visible in the photos (such as tires, pallets, trolleys, metal buckets, etc.). Blsvoxxv Eqo Stk Snoc Collection in Bremen. _____ Our terms and conditions apply; furthermore, the seller is not liable for typographical or data transmission errors. The appearance of the items offered corresponds to their age and the images provided. The technology and wear of the items offered are consistent with their age. Used machines are sold exclusively to commercial buyers and without any warranty.

Condition: excellent (used), Year of construction: 2011, pivoting range: 360 °, Welding manipulator SARTORE - PTA 12000 MACH-ID 9321 Make: SARTORE Type: PTA 12000 Bjv Stsx H Rhxsk Snolc Year: 2011 Vario matic Rotation / Angle Remote control with Dro Very littles used incl. 2000 mm false chuck  CE-Marked  Table Ø: 2000mm Table load on 50 mm: 12000 Table load on 200 mm:10000 Table load on 400 mm:6600 Table load on 600 mm:4500 Table load on 1000 mm:3500 Rotation table: 360° Lifting chuck: 0 - 135° Table rotation: 0,02 - 0,4U/mm Length: 2980mm Width: 1980mm Height: 1800mm Weight: 6000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, functionality: fully functional, overall weight: 310 kg, Weight: 310 kg Bjvjx I Rdij Stk Snjlc Dimensions: 900x700x1550(h) mm Motor power: 3 kW Solid square: 20x20 mm Solid round: 20 mm diameter Handrail: 60x12 mm

Year of construction: 1978, condition: excellent (used), FORGING HAMMER HUTA ZYGMUNT MPM 6300B Bovsivqanj Stk Snolc

Condition: good (used), Year of construction: 1985, Manipulator, lifting aid, lifting device, workstation crane, overhead jib crane, overhead crane, workstation crane, material grabber, column jib crane -Manufacturer: Thyssen, pneumatic manipulator type ESP -Load capacity: 30 kg -Operating pressure: 6 bar -Reach: max. 2900 mm -Hook height: min. 500 mm / max. 1500 mm Bsv Sox Ec Ifjtk Snslc -Swivel range: 360° -Minimum ceiling height: 4400 mm -Transport dimensions: 3410/800/H2000 mm -Empty weight: 610 kg

Condition: ready for operation (used), Romanian Forging Hammer CM 2500 (The hammer is similar to Huta Zygmunt MPM 6300B) - Maximum impact energy at full stroke: 7000 kgm - Ram weight: 2500 kg - Mode of operation: pneumatic Bljvew Sdxaj Stk Snec - Ram stroke: 850 mm - Number of blows per minute: 100 - Working pressure: 5–7 bar - Anvil weight: 48 t - Total weight: 65 t Romanian Forging Hammer CM 1250 (The hammer is similar to Huta Zygmunt MPM 3150B) - Maximum impact energy at full stroke: 3600 kgm - Ram weight: 1250 kg - Mode of operation: pneumatic - Table size (front to back): 700 mm - Stroke: 800 mm - Number of blows per minute: 110 - Working pressure: 5–7 bar - Max. upper die weight: 400 kg - Die height: 220 mm - Ram (front to back): 500 mm - Air consumption: 15 m³/min - Anvil weight: 24 t - Height of machine above floor: 3750 mm - Total machine height: 4380 mm - Total weight: 35 t

Condition: ready for operation (used), Forging hammers, C type, capacity 80 kg, 400 kg and 750 kg. Ram weight: 80, 400 and 750 kg. Blow energy: 150, 1000 and 2000 KJ. Stroke: 385, 670 and 835 mm. Strokes/min: 210, 130 and 105. Weights: 3,500 kg / 13,500 kg / 25,000 kg. Blev Stk Ssx Ahbfsnsc

Condition: new, Year of construction: 2018, machine/vehicle number: DF0163, pressure:800 t distance between columns:1200 mm stroke:500 mm total power requirement:85 kW weight of the machine ca.:40 t dimensions:4100 x 3500 x 6650 mm draw back pressure:80 t Master cylinder:1 Stück column diameter:250 mm dayligth:1000 mm Table dimensions:1300 x 1100 mm ram surface:1300 x 1100 mm Bljv Ssdxvfpstk Snec :800 mm table height over floor:950 mm table load:5 t pre-running speed:250 mm/sec return speed:150 mm/sec :1000 l :10 mm/sec :inbegriffen ? :inbegriffen ? :inbegriffen ? :inbegriffen ? :inbegriffen (800 x 530mm) ? :inbegriffen (800 x 530mm) ?

Condition: used, Lasko hammer KGK 063 Impact force 630 mkp Stroke max. 630 mm Bear weight 630kp Top pressure - filling pressure 5 bar Bjvsu Eb Nio Stk Snjlc

Condition: ready for operation (used), functionality: fully functional, Press line for manufacturing can ends (tops and/or bottoms) Comprising: Bovjx Ezuys Stk Snolc - Bliss 1831 double die press - Bliss double curler - IMC / Grace compound liner - Drying oven - Production capacity: up to 600 ends per minute

Condition: used, Year of construction: 1982, functionality: fully functional, Eccentric; 15 kW; Capacity 150 t; strokes per minute 120; ram stroke 175 mm Blev Sjxz A H Totk Snsc