Used Miscellaneous for sale (566)

Condition: good (used), machine/vehicle number: 3510, Year of construction: 1998, Miscellaneous X from Uniktruck Bljv Stkexyzrxj Snjc

Condition: used, Year of construction: 2019, controller manufacturer: Sonstige, controller model: , _____ Description: Year of manuf. : 2019 Control : Sonstige Double unwinding reel with drive Design:Short design Band width min./max.:230 – 520 mm Coil weight max.:2 × 30 kN Number of reels:1 Coil outer diameter min./max.:1,500 – 2,000 mm Spreading range min./ max.:460 – 525 mm Coil delivery:Industrial truck Reel loading:From the front (operating side) Coil unwinding:From the underside of the coil Material:Aluminium, soft Strip thickness min./max.:0.8 – 1.2 mm Tensile strength (Rm) min./max. :100 – 250 N/mm² Strip cross-section max.:600 N/mm² Straightening capacity:See straightening diagram Strip speed min./max.:2 – 10 m/min Strip infeed height above floor: 2,100 mm Degree of automation:Fixed / ± XXX mm Operating mode:Jog mode on sight system parameters System stroke rate:45 rpm Working direction:Right–left, front loading with forklift truck Flatness of installation site:± 15 mm Connection voltage:400 V, 50 Hz Ambient temperature:20 – 40 °C Compressed air connection:5 bar reel :Double reel with drive :Spreading :- Manual toggle lever system with hand crank :Coil limitation :22 November 2019 :22 November 2019 :- Single arms, manually adjustable according to scales, fixed at the front via :quick-release lever and at the rear via clamping screws :Brake/drive Bov Seycnf Sstk Snelc :- 2 frequency-controlled asynchronous motors :- 2 dual-circuit safety air pressure disc brakes :Swivelling :- Manual with 180° locking via pedal :Pneumatic pressure rollers with rubberised rollers at the top :mounted on brackets. :Hydraulic spreading :- Hydraulic spreading instead of manual spreading with hand crank :- Hydraulic unit with valves and piping mounted on the reel head :Belt pull-off and belt feed Belt loop :- Control via ultrasonic sensor/laser on the unwinding side

Condition: used, Binding Store are pleased to offer this A1 condition Plockmatic Morgana SR90/ TR90 Bookletmaker and Trimmer. This model has just been removed from a charity in-plant that has closed its printing division. This Bookletmaker has been fully maintained and has only done 110,000 booklets from new. The Plockmatic SR90/TR90 is a powerful and extremely quiet hand feed booklet-maker. It can produce booklets from A3 to A4 and A4 to A5 size booklets and has a staple and fold capacity of 22 sheets of 80gsm enabling booklets of up to 88 printed pages to be created. It has an very easy to use LCD panel to enable automatic size changes and has heavy duty staple heads and a staple cartridge capacity of 5000. The delivery of the finished booklets is from a motorised conveyor. If you are looking for a great value booklet maker thats very user friendly then this could be the machine for you. Format: A3 to A4 and A4 to A5 size Equipment: Booklets from A3 to A4 and A4 to A5 size Bsv Stkowdwxfj Snjlc

Condition: used, Year of construction: 2003, The BVM Compacta Trend 6020 is a high-performance shrink-wrapping machine designed for efficient and reliable packaging tasks. Manufactured in 2003, this machine is currently in production and located in Germany. It features side sealing and operates in a fully automatic function mode, ensuring consistent and precise wrapping. The Compacta Trend 6020 is suitable for a variety of product applications, including paper, packaging machines, tape strips, and stacks. With a capacity of 60 packages per minute, it can handle materials with a width of 500 mm (19.7 inches) and a length of 450 mm (17.7 inches). Its side sealing capability and inline operation make it an ideal choice for high-volume packaging tasks, ensuring that products are securely wrapped and protected. Format: 650 mm Equipment: Bljv Stkjwc T N Ro Snec Shrink-wrapping machine with side sealing Function modefully automatic Product applicationsPaper, for packaging machines, for tape strips, stacks Further propertieswith side sealing, inline, foils Capacity 60 p/min Width 500 mm(19.7 in) Length 450 mm(17.7 in)

Condition: used, The Matrix 530 Laminator is a versatile and efficient machine designed for high-quality lamination tasks. This machine is currently in stock and located in Germany. It can handle a maximum sheet width of 550 mm and operates at a maximum speed of 10 meters per minute, ensuring quick and efficient lamination processes. The 530 Laminator supports a maximum film width of 500 mm and is capable of one-sided lamination. It features mechanical, adjustable pressure settings to accommodate various material thicknesses, starting from 135 g/qm2. The machine is compatible with foils that have a core diameter of 76 mm, making it a reliable choice for a wide range of lamination applications. Format: 550 mm Equipment: Max. sheet width: 550 mm Max. speed: 10 m/min Max. film width: 500 mm Lamination: one-sided Pressure: mechanical, adjustable Blev Stkowc Alno Snsc Material: from 135 g/qm2 Core diameter of foils: 76 mm:

Condition: used, Year of construction: 2000, The Stock A-14 V567A/1650P is a high-speed laminating machine designed specifically for the packaging industry. It integrates advanced technology to efficiently laminate various materials, providing enhanced durability and protection to packaging products Format: 1640 x 1640 mm Equipment: Feeder: Edge Feeder (MIRUS) Sheet feeder by carrier chains Press Station Speed: 3,000 cycles/h Control device: Siemens SPS-Control / Micro Control System Gluing Station Laminating Station Bsv Stk Sjwcqwxsnelc Technical Details Size max: 1640 x 1640 mm Size min: 500 x 500 mm Sheet weight: Cardboard 100 - 800 g/qm Infeed height: 1,400 / 1,800 mm Carrier Sheets: one-sided corrugated board, E/B- and F-Flute, two-sided corrugated board up to 7 mm thickness cardboard from 0.5 mm thickness

Condition: used, The Wahli-Stream Feeder TM 530 is a reliable feeder designed for efficient paper handling. Manufactured by Wahli, this model is located in Germany, with pricing available upon request. The machine supports an A2 format and is designed to enhance productivity in printing and finishing operations. Format: 360 420 mm Equipment: Bsv Stk Sevphzpjnslc AUTOMATIC ENVELOPE FEEDER (with vacuum suction) SUITABLE FOR PRESSES WITH STREAM / SINGLE SHEET FEEDERS ADJUSTABLE VACUUM, HEIGHT & SPEEDDELIVERY CONVEYOR MIN ENVELOPE SIZE: 7.6 x 12.7 CM MAX ENVELOPE SIZE: 36 x 42 CM

Condition: used, The Robatech Roba 40 nozzle glue system is a specialized adhesive application system designed for precise and efficient gluing operations. Manufactured by Robatech, this model is located in Germany, with pricing available upon request. The system is equipped with a 40 nozzle configuration, ensuring accurate and consistent adhesive application for various industrial and manufacturing needs. Format: Equipment: 40 nozzles for consistent adhesive application Blov Ssvphzietk Snjc

Condition: used, Year of construction: 2002, This Knorr SL-2-V-E stack lifter is a robust and versatile solution designed for industrial environments. Built with a durable steel frame, it is specifically engineered to handle heavy loads and streamline workflows in paper processing. The stack lifter efficiently raises paper stacks to an ergonomic working height, making it ideal for operators using cutting machines or vibrating tables. Its adaptable design allows for use on both sides???whether feeding or removing stacks???enhancing flexibility and productivity in the workplace. Compatible with leading cutting machines such as Polar, Wohlenberg, and Perfecta, this stack lifter is a reliable addition to any industrial setting, ensuring smooth and efficient material handling. Manufactured in 2002, this unit is currently available from stock in Germany. Format: Equipment: Robust steel frame construction for industrial loads Stack lifter Stack lift for cutting material: Paper stacks are brought to working height Ergonomic working height for operators on cutting machines or vibrating tables Suitable for cutting machines such as Polar, Wohlenberg, Perfecta Can be used on both sides ??? for feeding or removing stacks of paper Blev Stkevlx H Io Snec

Condition: used, This Poege Letterpress is a historic museum piece, manufactured in 1900. Currently in storage and located in Germany, this item is a significant artifact from the early days of printing technology. This piece is ideal for collectors, museums, or educational institutions focused on preserving and showcasing the evolution of printing machinery. Format: Equipment: Letterpress, perfect for Collectors or Museum Bev Stk Sjvfx Tnenelc

Condition: used, The Nagel Multinak S is a stitching machine designed for efficient and precise stitching tasks. Currently in storage and located in Germany, this model is available for transport under FCA delivery terms. With its double stitching heads and magazine stitcher, it offers high productivity and versatility in handling various stitching requirements. Format: Equipment: double stitching heads Blev Stkovfx Sqj Snoc magazine binder

Condition: used, The Horizon GM 5 Spine taping machine is a reliable and efficient binding solution manufactured by Horizon. This machine is designed to handle a wide range of spine taping tasks with precision and ease. It is currently available in stock and located in Germany. The delivery terms are FCA (Free Carrier), meaning the seller delivers the goods, cleared for export, to the carrier appointed by the buyer. The Horizon GM 5 comes equipped with standard features that ensure optimal performance. It can accommodate heights ranging from 2 to 30 cm, making it versatile for various binding needs. Format: Bevsvfx Rgj Stk Snolc Equipment: Equipped with Standard equipment, height 2 - 30 cm

Condition: used, Year of construction: 2016, The Gallus TCS 250, manufactured by Gallus in 2016, is a high-performance label printing press designed for efficiency and precision. With a format of 265 mm and a print count of 2 million, this machine is currently available in stock and located in Germany. This press is equipped with a range of advanced features to meet various printing needs. It operates at a speed of 11,000 impressions per hour and has a cylinder circumference of 254 mm, accommodating a web width of 265 mm. The hotfoil stamping speed is 8,000 cycles per hour, with a maximum print size width of 265 mm and a minimum of 130 mm, allowing for precise format adjustments in increments of 0.01 mm. The machine operates at a voltage of 400V for the main unit and 230V for peripherals, with a net frequency of 50Hz. Key features include a feeding unit with web cleaning, corona pretreatment for enhanced adhesion, and trimming and suction capabilities. The press can handle paper weights ranging from 80 to 180 g/qm2 and carton up to 300 g/qm2 with a maximum thickness of 0.3 mm. It is compatible with commercially available adhesive bonds and supports UV offset printing. The configuration includes 4 printing units, 1 coating unit, 1 rotary die cutter unit, and a rotary hotfoil embossing unit. Additional features include web inspection via the Powerscope 4000 manual system, a Uviterno Coldstar water-cooled drying model with UV capabilities, 4 trimming knives, mesh pulling monitoring, and an IR dryer. The maximum web diameter is 800 mm, and the press is equipped with remote maintenance capabilities, a plate tool, and maintenance tools for ease of use and upkeep. Format: 265 mm Blov Stkjvfx A As Snec Equipment: Speed: 11.000 T/h Cylinder circumference: 254mm Web Width: 265mm Hotfoil Stamping Speed: 8,000 cycles/h Max print size width: 265 mm Min print size width: 130 mm Format length graduation: 0,01 mm Machine Voltage: 400V Voltage Peripherals: 230V Net Frequency: 50hz Feeding Unit Web Cleaning Corona Pretreatment Trimming and Suction Paper: 80 bis 180 g/qm2 Carton: up to 300g/qm2 at max. 0.3mm Adhesive Bonds: commercially available UV Offset Printing Units: 4 Coating Units: 1 Rotary Die Cutter Units: 1 Rotary Hotfoil Embossing Unit Web Inspection Web Inspection type: Powerscope 4000 manual Drying Model: Uviterno Coldstar Water cooled IR or UV: UV Trimming Knives: 4 Mesh Pulling Monitoring IR Dryer Max. Web Diameter: 800mm Remote Maintenance Plate Tool Maintenance Tools

Condition: used, Year of construction: 2010, The Mailmaster 565HS, manufactured by KAS in 2010, is currently in stock and located in Germany. This machine is in good condition with no damages and is configured with FSFi for faster intake, featuring 6 attachment stations. It can handle envelope formats from DL to C5 and operates at a speed of up to 7,000 cycles per hour. The delivery terms are FCA. Equipment: Bljv Sjvfxqastk Snjc Speed: bis zu 7.000 Takte/h Envelope formats: DL - C5 Configuration: FSFi (fast feed), 6 insert stations Good condition without any damage

Condition: used, The Bindomatic 201 DFS, manufactured by Bindomatic, is a efficient binding machine designed for A4 format documents. Currently in production in Germany, this machine can bind documents up to 15 mm thick, which is approximately 150 sheets of 80 g paper. It has a throughput time of 90 seconds, allowing it to bind up to 300 documents in 12 minutes. The machine weighs 128 kg and features a display control, stand-by switch, and a resettable counter. Its dimensions are 107.5 x 49.0 x 94.0 cm. The delivery condition is FCA. Format: A4 Equipment: 300 documents in 12 minutes Blov Stk Sjvfx H Isnoc Binding thickness: up to 15 mm (approx. 150 sheets of 80 g paper) Processing time: 90 seconds Dimensions: 107.5 x 49.0 x 94.0 cm Weight: 128 kg Functions: display control, stand-by circuit, resettable counter

Condition: used, The Iram 16, produced by Josef Foellmer, is currently in production and located in Germany. This model is equipped with a 4-head paper drill. The delivery terms are FCA (Free Carrier), meaning the seller delivers the goods to the carrier appointed by the buyer at the seller's premises. Format: Equipment: Bev Sovfxw Totk Snjlc 4 head paper drills

Condition: used, The ES 5040 21, manufactured by Italdibipack, is currently in stock and located in Germany. The machine is offered in its current condition as seen. The delivery terms are FCA (Free Carrier), which means the seller delivers the goods to the carrier appointed by the buyer at the seller's premises. Format: Bev Stkovfxq Hj Snjlc Equipment: as is - Brand: Italdibipack- Model: Espert 5040- Year of manufacture: 2008- Motor power: 6.70 HP (5 kW)- Tunnel dimensions: 450 x 230 mm (height)

Condition: used, Year of construction: 2006, The SL 12 P, manufactured by Perfecta in 2006, is currently in stock and located in Germany. This machine has a format of 1,050 x 1,450 mm and features angular boards, a side gauge, and a back panel that allow for manual restacking of the completed material after cutting. It has a maximum carrying capacity of 1,200 kg and a platform size of 1,050 x 1,450 mm. The maximum stroke is 890 mm. The delivery terms are FCA (Free Carrier), meaning the seller delivers the goods to the carrier appointed by the buyer at the seller's premises. Format: 1.050 x 1.450 mm Equipment: Angular boards - Side gauge and back panel allow to manually restack the completed material after cu Carrying capacity max: 1.200 kg Platform size: 1.050 x 1.450 mm Blovovfx Aij Stk Snjc Stroke max: 890 mm

Condition: used, Year of construction: 1991, The Josef Foellmer 400/4, manufactured by Josef Foellmer in 1991, is a machine with a format of 980 x 600 mm currently in stock and located in Germany. This machine is equipped with a 4-head paper driller and an investment table with a tabulator measuring 98 x 60 cm. It also features speed regulation. The delivery terms are FCA. Format: 980 x 600 mm Blsv Sjvfxppjtk Snjc Equipment: Investment table with tabulator 98 x 60 cm 4 head paper drills Speed regulation

Condition: used, Year of construction: 2010, The Maximum Machines UG PSV 600, manufactured in 2010, is a machine with a format of 600 mm. It is currently in stock and located in Germany. This pressing unit with a vertical stacker is PLC-controlled and features automatic shingle control, multiple counters, and a batch counter. It offers better information through the PLC display, easier setting, and enhanced efficiency with a stronger pressing unit. Additionally, it is equipped for 2-up operations. The delivery terms are FCA. Format: 600 mm Equipment: PSV 600 - Pressing unit with vertical stacker Bev Stovfxx Dsk Snelc basics: plc-controlled - automatic shingle control - multiple counters better informations by plc-display - easier setting - more efficiency Stronger pressing unit - batch counter - 2-up-equipment

Condition: used, Year of construction: 1992, The Hang 107-30, manufactured in 1992, is currently in stock and located in Germany. This machine features infinitely variable drill speed and infinitely variable table stroke speed. It is equipped with a 4 Kopf Papierbohrer and allows for quick clamping of the paper drills. The machine is powered by a three-phase motor operating at 380 V. The delivery terms are FCA. Equipment: 4 head paper drills with three-phase motor 380 V Infinitely variable drill speed and infinitely variable table stroke speed Blsv Stevfxviek Snoc Quick clamping of the paper drills

Condition: used, Year of construction: 1997, Perfecta SHL 12 P pile lift is a machine manufactured by Perfecta in 1997, with a format of 800 x 600 mm. Currently stored in Germany, it has a maximum load capacity of 1000 kg and a maximum dimension of 800 x 600 mm. The delivery terms are FCA. Bovsvfxr Rj Stk Snslc Format: 800 x 600 mm Equipment: Max. Load capacity: 1000 kg Max. Dimension: 800 x 600 mm

Condition: used, Format: 0x0 Bjv Stkex Rh D Ss Snelc Equipment: Toggle press for beech corners, 40 mm stroke, 73 mm throat depth

Condition: used, Format: 0x0 Equipment: Bljv Sjx Rh D Estk Snsc Corner cutter

Condition: used, Year of construction: 1982, Format: 0x0 Blevsx Rh Dxs Stk Snsc Equipment: Corner cutter, manual